REPAIR MAINTENANCE TO INTERNAL WIRING FITTINGS AND FIXTURES REWINDING OF CEILING EXHAUST FANS GEYSERS AND COOLING APPLIANCES DG SETS LIGHTNING PROTECTION STREET LIGHTS LT PANELS LT UG CABLES EARTHING ALLIED LT MAINTENANCE WORKS AND EXTERNAL WATER

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping/conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps. one light / fan point controlled by one switch complete all as specified and directed .

All as per item No 02 here in before but one 3 pin 5 amps switch socket on same board

All as per item No 02 here in before but one 3 pin 5 amps switch socket on independent board

All as per item No 02 here in before but with cable size 4.0 Sqmm and 4.0 Sqmm as earthwire for 3/5 pin, 15/16 amps socket outlet independent board

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting notexc 10 cm girth complete all as specified and as directed .

S & F modular switch, 1 way, 6A, 1 module complete all as specified and as directed .

S&F modular socket, 6A, 2/3 pin combined 2 module complete all as specified and as directed .

S & F modular switch, 1 way, 16A, 1 module complete all as specified and as directed .

S&F modular socket, 6/16A, 2/3 pin combined 2 module complete all as specified and as directed .

S&F in replacement of switch piano flush type single pole one way 5 amps 230 volts ISI marked complete all as specified and as directed .

S&F in replacement of switch socket combination flush type universal 2 in 1, 3 pin 5 Amps 230 volts ISI marked complete all as specified and as directed .

All as per Item No 12 here in above but of capacity 15 Amps.

S&F in replacement of ceiling rose 3 terminal 5 Amps 230 volts ISI marked, PVC/Polycarbonate, insulated body complete all as specified and as directed .

S & F in replacement of Fan step Regulator, 120 Watt, 2 module, hum free complete all as specified and as directed .

S&F in replacement of Modular Bell push, 6 A, 1 module complete all as specified and as directed .

S&F in replacement of Bell electric ding dong AC 230 V single pole complete all as specified and as directed .

S&F in replacement of batten type LED light fitting 1x 20W, 220V, 4 feet, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed .

S&F in replacement of batten type LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED tube light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed .

S&F in replacement of LED bulb 10w retrofit type to fit in lamp holder/bulk head fittings complete all as specified and as directed .

S&F in replacement of recess mounted/surface mounted/POP mounted or as per site requirement 2' x 2' square LED panel 36 watts, worm white / Neutral white or 3000 K to 6500 K as per user requirement of size 600 x 600 x 9 mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed .

S&F in replacement of round / square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed .

S&F in replacement of street light brackets made out of 40mm bore GI tubing, light grade, 1.5m long, bent to required shape, including necessary bending, welding, etc fixed with 2Nos. clamps made out of 32x5mm GI strip including necessary drilling holes, screws, nuts, bolts, etc complete all as specified and as directed

S&F in replacement of LED bldg security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed

S & F in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp, 240 V MCB complete all as specified and as directed.

S& F in replacement of MCB SP 05 amps to 32 amps, 240 volts,10 KA complete all as specified and as directed.

S& F in replacement of MCB SPN 16 amps to 32 amps, 240 volts,10 KA complete all as specified and as directed.

S&F in replacement of MCB TPN/FP 16 Amp to 32 Amp 415 V, 50 Hz, complete all as specified and as directed.

S&F in replacement of MCB TPN/FP 40 Amp to 60 Amp 415 V, 50 Hz, complete all as specified and as directed.

S&F in replacement of single door MCB DB TPN 4 Way 415 V , 50 Hz, complete all as specified and as directed.

S&F in replacement of single door MCB DB SPN 4 Way 240 V , 50 Hz with 200A rated copper busbar complete all as specified and as directed.

S&F in replacement of single door MCB DB SPN 8 Way 240 V , 50 Hz, with 200A rated copper busbar complete all as specified and as directed.