Construction of Multi Disciplinary Sports Complex at Khanikar, Dibrugarh District under NLCPR

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tanks etc. including refilling (return filling) quantity as necessary after completion of work, breaking clods in return filling, dressing, watering, ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Up to a depth of 2 Metre below the existing ground level In ordinary soil

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tanks etc. including refilling (return filling) quantity as necessary after completion of work, breaking clods in return filling, dressing, watering, ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Up to a depth of 2 Metre below the existing ground level. In hard/Dense soil

Extra over item 2 above for each 1Meter depth or part thereof beyond the initial depth of 2Meter.

Earth/ sand filling in plinth in layers not more than 150MM thick including necessary carriage, watering, ramming etc. complete as directed and as specified including payment of land compensation, forest royalty, sales tax and otherduties and taxes as may be necessary. With earth or silt or sand obtained by head load with lead up-to 90 Meter and lift upto 2 Meter.

With silt (predominantly non plastic) by truck carriage including loading and unloading.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity etc. complete as directed and specified. Other than Guwahati city.

Plain cement concrete works with coarse aggregate of sizes 13MM to 32MM in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately). In proportion 1 cement : 3 sand : 6 coarse aggregate by volume (using mixture machine)

In proportion 1 cement : 5 sand : 10 coarse aggregate by volume (using mixture machine)

Plain cement concrete floor base in proportion 1:3:6 laid in alternate bays as specified with coarse aggregate of size 13MM to 32MM including dewatering if necessary and curing etc. complete. 100MM thick.

Providing and laying 25MM thick damp proof course with cement concrete in the proportion 1:1.5:3 with graded stone aggregate of 10MM down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/ reinforced cement croncrete works with coarse sand and 20MM down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine. In sub-structure upto plinth level: Foundation, footing, column with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100MM thick up to plinth level.Without using admixture, plasticiser M20 or proportion 1:1.5:3

Providing and laying plain/ reinforced cement croncrete works with coarse sand and 20MM down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine. In sub-structure upto plinth level: Foundation, footing, column with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100MM thick up to plinth level.Without using admixture, plasticiser M25

Providing and laying plain/ reinforced cement croncrete works with coarse sand and 20MM down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine. In sub-structure upto plinth level: Foundation, footing, column with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100MM thick up to plinth level.Without using admixture, plasticiser M30 or proportion 1:1:2

Providing and laying plain/ reinforced cement croncrete works with coarse sand and 20MM down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine. In sub-structure upto plinth level: Foundation, footing, column with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100MM thick up to plinth level.Without using admixture, plasticiser M35 or proportion 1:1:2

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (i)Using Mixer Machine In super-structure from plinth level up to 1st floor level Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. Without using admixture, plasticiser M20 grade concrete or Prop. 1:1.5:3

In super-structure from plinth level up to 1st floor level. Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. Without using admixture, plasticiser M20 grade concrete or proportion 1:1.5:3

In super-structure from plinth level up to 1st floor level.Walls (thickness not less than 100MM) including attachedpillasters, buttresses, plinth and string course etc.Without using admixture, plasticiser M30 grade concrete

Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.Without using admixture, plasticiser M30 grade concrete

Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.Without using admixture, plasticiser M35 grade concrete

On domes, vaults and shell roof Without using admixture, plasticiser M30 grade concrete

Extra over item Nos. 2.2.1.B above for each subsequent floor or part thereof above the 1st floor level.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Providing form work of 12mm thick Plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level. (a) Thickness not exceeding 200mm.

Extra for each subsequent floor or part thereof above the 1st Floor level as mentioned in item no. 3.2.1 & 3.2.3(b).

Extra for each subsequent floor or part thereof above the Head Room Floor level as mentioned in item no. 3.2.1 & 3.2.3(b).

Extra for each subsequent floor or part thereof above the 1st Floor level as mentioned in item no. 3.2.3(a).

Extra for each subsequent floor or part thereof above the Head Room Floor level as mentioned in item no. 3.2.3(a).

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure(II) In superstructure above plinth level up to 1st floor level.(b). In proportion 1:4.(1 cement:4 sand)

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (d) In proportion 1:6.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 115 mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the Head Room floor level.

25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing etc. complete as directed.

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). Normal range (a)Somany/ Orient/Nitco/Asian Make (ii)Of size 200mmx300mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make (ii)Of size 600mmx600mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A)CERAMIC (i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. height of the proping and centering below supporting floor to ceiling not exceeding 4Meter and removal of the same for in-situ reinforced concrete and plain concrete work. Foundation, footing, bases of columns, pile cap, raft and mass concrete works etc. Using 38MM thick plank.

Sides of tie beams, grade beams etc. at or below ground level. Using 38MM thick plank.

Columns, pillars, posts and struts.Square, rectangular, polygonal in plan or any shape like Tee/ L etc. having plane vertical face Using 38MM thick plank.

Sides and soffits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. For depth not exceeeding 1Meter.

Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like. Floors etc. upto 200MM in thickness.Using 38MM thick plank.

Vertical surface such as walls (any thickness), parapet walls partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.

Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. Using 38MM thick plank

Staircase with sloping or stepped soffits including risers and stringers but excluding landing using 38 MM thick plank.

Arches/ slabs having curved surface in one direction using 38 MM thick plank.

Domes, vaults and shell roofs having curved surface in both directions (only area of underside shall be measured for payment Using 38 MM thick plank.

Extra for each subsequent 1 Meter height or part thereof beyond the initial height of 4 Meter as mentioned in item 3.1.1 above.

Extra for each subsequent floor or part thereof above the first floor level as mentioned in itemnumber 3.1.1 and 3.1.3(b) above.

Providing soling in foundation and under floor at all levels with stone/ best quality picked jhamma brick, sand packed and laid to levels and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. Brick on flat soling

Providing soling in foundation and under floor at all levels with stone/ best quality picked jhamma brick, sand packed and laid to levels and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. Brick on flat soling

Brickwork in cement mortar with 1st class bricks including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level. In sub-structure up-to plinth level including dewatering if necessary In proportion 1:5 (1cement : 5sand).

In superstructure above plinth level up-to 1st floor level. In proportion 1:5 (1cement : 5sand).

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up-to 1st floor level (protruding MS rod/ Tor steel of column to be embeded in cement mortar and will be measured and paid separately). 112MM thick brick wall In cement mortar in proportion 1:5 (1cement : 5sand).

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. 112MM thick brick/ reinforced brick wall

Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in proportion 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. Random rubble masonry.

40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed.

Cement plaster skirting with cement mortar in proportion 1:3 (1cement:3coarse sand) finished with a floating coat of neat cement and including rounding of junctions with floors. 20MM thick

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). On FloorNormal range (Somany/ Orient/ Nitco/ Asian make)Of size 300MM*300MM and above.

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8MM on walls and skirtings over cement mortar bed 10MM thick in proportion 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tilescomplete at all levels as specified and directed. (Cement plastering tobe measured and paid separately).(Coloured pigment should be in conformity with colour of tiles and as approved and directed by Department). (Walls means both interior and exterior walls).On wallsNormal range Somany/ Orient/ Nitco/ Asian make Of size 200MM*200MM and above.

Providing vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18MM on floors, skirtings, risers and treads of steps over 15MM thick base of cement mortar in proportion 1:3 (1 cement:3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).Normal range Somany/ Orient/ Nitco/ Varmora/ Johnson make.Of size 600MMx600MM and above.

Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) ii)With White cement

Kota-stone slab flooring of 18MM thick over 20MM thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 550MMx550MM.

Kota stone slab of 18MM thick in riser of steps, skirting, dado and pillars laid with 10MM thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. 550MMx550MM.

Providing polished granite tiles of approved quality, size, shape and thickness not less than 18MM on floors, skirtings, risers and treads of steps over 15MM thick base of cement mortar in proportion 1:3 (1 cement:3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/ white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed (cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf).

Providing antiskid tiles of approved quality size, shape not less than 8MM on floor, skirting over a cement mortar bed 15MM thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/ Sika/ Pedelite/ Rouf)/white cement complete at all level as specified and directed Vitrified. Normal range (sizes 300MM *300MM and above). Somany made: Durastone (Unpolished heavy duty vitrified tiles).

10MM thick cement plaster in single coat on fair side of brick/ concrete wall for interior plastering up to 1st floor level including arrises and/ or rounded angle not exceeding 80MM in girth and finished even and smooth including curing complete as directed. In cement mortar 1:4

15MM thick cement plaster in single coat on rough side of single/ half brick walls for interior plastering up to 1st floor level including arrises or rounded angles not exceeding 80MM in girth and finished even and smooth including curing complete as directed. On rough side In cement mortar 1:4

15MM thick cement plaster in single coat on rough side of single/ half brick walls for interior plastering up to 1st floor level including arrises or rounded angles not exceeding 80MM in girth and finished even and smooth including curing complete as directed. On fair side In cement mortar 1:4

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a)15 mm thick

Extra over item 6.2.2 above for exterior plastering over wall up-to a height of 1st floor level above ground level including curing complete as directed. On single coat plaster

Supplying, fitting, fixing and painting where necessary(one coat primer and two coats of paint) M/F SuspendedCeiling which includes GI perimeter channels of size 0.55 MM thick (having one flange of 20MM and another flange of 30MM and a web of 27MM) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610MM c/c. Then suspending GI intermediate channels of size 45MM (0.9MM thick with two equal flanges of 15MM each) from the soffit at 1220MM c/c with ceiling angle of width 25MM*10MM*0.55MM thick fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55MM thickness having knurled web of 51.5MM and two equal flanges of 26MM each with lips of 10.5MM are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457MM c/c, 9.5MM/ 12.5MM tapered edge Gypboard (conforming to BIS:2095-1982) is then screw fixed to ceiling section with 25MM long dry wall screws at 230MM c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).12.5 MM thick.

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) suspended ceiling which includes GI perimeter channels of size 0.55MM thick (having one flange of 20MM and another flange of 30MM and a web of 27MM) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610MM center to center. Then suspending GI intermediate channels of size 45MM (0.9MM thick with two equal flanges of 15MM each) from the soffit at 1220MM center to center with ceiling angle of width 25MM*10MM*0.55MM thick fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55MM thickness having knurled web of 51.5 MM and two equal flanges of 26MM each with lips of 10.5 MM are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 298MM center to center 12.5MM thick square edge Fulltone/ Sundance/ Cratone/ Louvertone/ Textured Gypboard panels of size 595MM*595MM conforming to BIS:2095-1982 is then screw fixed to ceiling section with 25MM long drywall screws at 290MM center to center. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and as Design Action Group, New Delhi 110025 associated builders, Guwahati 781024 Swimming Pool Page 6 Assam Public Works Department, Guwahati 781003 directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary and glass wool to be measured and paid separately).M/F Frame Work with Design Type Textured Gypboard Tiles 9.5 MM thick.

Then 12.5mm thick square edge Fulltone/ Sundance/ Cratone/ Louvertone/ Textured. Gypboard panels of size 595mmx595mm (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 290mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary). (Glass wool to be measured and paid separately). (A) M/F Frame Work with Design Type Textured Gypboard Tiles 9.5mm thick.

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. (b)Using other ISI marked approved brand tube

Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint.

Providing pre painted galvanized iron sheet roofing (PPGI) accessories (ridges/ valley/ gutter/ flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof/ Durakolor/ Wonder Roof or equivalent as directed by the Department v)0 .60mm thick

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc to be measured and paid separately). Dyna Roof/ Satyam/ Century 0.50 mm thick

Providing Pre Painted Galvalume Sheet Roofing (PPGL) accessories (Ridge/ Valley/ Gutter/ Flashing) (Dyna Roof/ Satyam/ Century) at all levels including fitting and fixing self drilling, self tapping screws complete. 0.50 mm thick

Providing pre painted galvanized iron sheet roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof/ Durakolor/ Wonder Roof or equivalent as directed by the Departement. a iv 0.60 MM thick.

Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium profile sheet (total coated thickness=0.45mm) of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) DURASHINE TILE PROFILE (0.50mm(TCT) x 505mm)

Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium roof , wall and tile profile sheet accessories (total coating thickness=0.45mm) including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.)Plain Ridge

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (b) With 1st class timber (Bonsum/ Sundi)

Providing and fixing 1st class timber moulded architrave of size 50x20mm to door and window frames with countersunk wood screw,wooden plugs and applying a coat of wood preservative on unexposed surface etc. With Teak wood/Sissu wood.

Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) With 1st class local wood 35 mm thick.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. Non decorative type and block board core. 35 mm thick

Providing, fitting and fixing MS grill of required pattern for window/ clerestorey window/ openings with MS flats at required spacings and frame all round, square or round MS bars with round headed bolts and nuts or screws. II Ornamental grill. c Fixed to brickwork/ PCC/ RCC.

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)Thickness = 1.5 mm thick

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Applying priming coat with ready mixed paint, wood primer (pink) over new wood based surfaces over 100mm in girth/ width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

Painting two coats surfaces over 100mm in width or grith (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac paint) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter sand papering and stopping.

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant BIS specifications) fitted with 6MM*3.15MM lugs 100MM long embedded in CC CC blocks 150MM*100MM* 100MM in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels (cement concrete to be measured and paid separately). a b Fixed windows and ventilators. 6MM clear glass.

5MM frosted glass

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant BIS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. a a 2 Track sliding window. i 6MM clear glass.

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant BIS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. a a 2 Track sliding window. i i 5MM frosted glass.

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant BIS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. a a 3 Track sliding window. i i 6MM clear glass.

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of100 MM * 45 MM * 2.5 MM section of approved brand with door style of size 88 MM * 45 MM * 2.5 MM, top rails 50 MM * 45 MM * 2 MM lock rails 100 MM * 45 MM * 2 MM and bottom rails 100 MM * 45 MM * 2.5 MM fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by Department at all levels.45 MM * 2.5MM fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. 6MM clear glass.

Pre-laminated Board.

Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sandpapered smooth.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from morter dropings and other foreign matter and including preparing the surface even and sand papered smooth. Priming coat with distemper primer.

Top coats.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1 Liter of paints with 1 Liter of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the Department

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1 Liter of paint with 750 ML of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the Department.

Applying primary coat over new steel and other metal surface over 100MM in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushes, fine steel wood scrappers and sand paper. With ready mixed 'red-lead' primer

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint J&N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Surface over 100MM in width or girth. High Gloss(Asian paint/ Berger paint/ ICI paint/ J&N paint/ Nerolac).

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint J&N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Surface over 100MM in width or girth. General purpose (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Nerolac).

Painting two coats Surfaces over 100mm in width or grith (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J& N paint/Nerolac paint) to give an even shade including cleaning the surfaces of dirt, dust and other foreign matter.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) Sliding door bolts 250mm x16mm sliding door bolt.

Tower bolt 200mm x 10mm tower bolt.

Tower bolt 100mm x 10mm tower bolt.

150 mm door handle.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL Super Ductile (SD) TMT reinforcement bars

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC works, reinforced brick walling including straightening, cleaning, cutting and bending to proper shape and length as per the details, supplying and binding with 20Gauge annnealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (up to 1st floor level). From primary producer: TATA/ SAIL/ Esser Steel/ Jindal steel/ Shyam steel/ RINL.TMT-Corrosion Resistant Steel (CRS) reinforcement bar.

Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. In beams and joists with connecting plates/ angled cleat. fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed and as per the specifications. Using TATA make RHS/ SHS of Grade 310 conforming to relevant BIS code 4923:1997.

Providing, fitting, hoisting and fixing of roof trusses fabricated using any one or combination of following sections of (i) square section (ii) rectangular hollow section of specification SHS/ RHS and including purlins, bottom runners and providing MS cleat, MS angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a a Using TATA make RHS/ SHS of Grade 310 conforming to Design Action Group, New Delhi 110025 associated builders, Guwahati 781024 Swimming Pool Page 8 Assam Public Works Department, Guwahati 781003 relevant BIS code 4923:1997

Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates).

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, chanels, plates etc., including welding grinding, buffing, polishing and curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge. (For payement only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fastners etc. will be considered.

Providing and fixing in position collapsible MS shutters with vertical channels 20MM*10MM*2MM braced with flat iron diagonals 20MM*5MM size with top and bottom rails of T-iron 40MM*40MM*6MM with 38MM diameter steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. complete including cost of wire, spring and hood cover for the shutters

Providing and fixing rolling shutters of approved make made of 80 MM wide MS laths interlocked together through their entire length and jointed together at ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50MM*6MM MS flat iron with another horizontal flat at the middle, 20MM diameter MS bars at 200 MM apart from bottom flat to top flat and 20MM diameter MS bars at 200MM apart from bottom flat to middle flat including, drilling, welding etc. complete. All vertical bars are to be protruded at-least 100MM above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 numbers (minimum) strong iron hinges of MS bars and flat of same sizes on each leaf to be embeded in CC brick pillars as 'necessary including a red oxide painting to all iron works as directed and specified (separate payment will be made for the posts).

Providing rails for plying of rollers of gate made made from 50MM*6MM size MS flat and to be fitted with 3 numbers of hinged hold fasts to be embedded in concrete proportion 1:2:4 of 10MM wide and 75MM deep over brick flat soling 250MM wide including curing etc. complete.

Providing roller to the gate including welding etc.complete.With 25MM*50MM (diameter) roller.

Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15MM thick cement plaster in proportion 1:2 with a floating coat of neat cement finish.

Providing 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm drain with brick work in cement mortar in prop 1:5 with half brick thick side walls and 100mm thick C.C. (1:3:6) base over one brick flat soling including 15mm thick cement plaster in prop 1:3 finished with a floating coat of cement slurry as directed with necessary earth work in excavation of foundation trenches and refilling the sides after completion of work as specified.

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Providing drain with cement concrete (1:3:6) 10CM thick sides and 10CM thick bed over brick flat soling including 15MM thick cement plastering in proportion 1:3 finished with a floating coat of cement slurry as directed with the necessary shuttering for the sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. Using Master Crete M-81 of Choksey Chemicals / Dr. Sealkit Sealcrete (Asian Chemicals)

Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/ RHEOMIX 141 by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. Reinforcement to be measured and paid seperately as per item number 21.4.1. Uniform pile.Concrete Grade M 30.Pile diameter 600 MM.

Empty boring for specified diameter piles from ground level to cut-off level. Pile diameter 600 MM.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent BIS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified BIS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor etc.). TMT bar made of primary producer (from primary producer

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test (rate for safe working load).

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test (rate for safe working load).

Plumbing, Deep Tube Well and Pumps.

Preparing RCC surfaces in expansion joints by thoroughly cleaning with wire brush etc. followed by power washing to make the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

Providing treatment of expansion joints by the following process as specified and directed by the department: Preparation of groove by nosing the groove in required sizes with cement sand mortar (in proportion 1:4) mixed with Sika Latex of Sika India Limited/ Dr. Sealkit MasterBond Latex (Asian Chemicals) @ 4% by weight of cement as specified & directed by the Department complete after proper surface preparation including cleaning/ chipping removing all sorts of loose particles and foreign material and cleaning surface thoroughly (surface preparation including thorough cleaning of surface to be measured and paid separately).

Providing and applying two coat of Sika Primer P in both surface of the expansion joint followed by applying Sikaflex Construction Polyurethane based sealant on vertical joint surface after proper fixing of necessary backup materials as specified and directed by the Department complete.

Providing pre-cast RCC slab in proportion 1:2:4 reinforced with 10MM MS bars @150MM centre both ways tying with 20G black annealed wire with necessary shuttering, curing etc. including fixing in position as directed. a a 100MM thick slab

Providing and fixing Duraboard HD-100 premoulded compressible filler board at all heights and depths of minimum density 95 KG/ CuM, non-staining having less than 1% water absorption, compression recovery of 93% (minimum) as per manufactured specification with polysulphide sealant to seal the expansion joint including preparation of surface, Polymer Modified Mortar (PMM) (proportion 1cement : 3 sand : 1 acrylic polymer) nozing, carriage of materials, cutting and placing to the required size complete at all levels as per drawings and direction of Engineer-in-Charge. 75MM

Pre-construction anti-termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (Five) Litres per Square Meter of the surface to be spread with light rodding so as to ensure proper absorption by filled up earth (supplying of necessary tools and accessories by contractor) as per direction of the Department. a b With aqueous emulsion having concentration 1:499 with Premise 350 SC (Imidachloprid 30.5% SC) and water, i.e. 0.07% solution

Construction of sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 including compensation of earth. (Including cost of testing of materials at site and at laboratory as directed by the Department).From Private land.

Extra lead beyond initial lead of 3 KM.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5KM) (including the cost of testing of materials at site and laboratory as directed by the Department).Using Grading I material.

Extra lead beyond initial lead of 5 KM.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant IS code for RCC works, reinforced brick walling including straightening, cleaning, cutting and bending to proper shape and length as per the details, supplying and binding with 20Gauge annnealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (up to 1st floor level). (b) Other ISI approved TMT reinforcement bar (SRMB/SAI/ BISCON/ X Tech) (for Assam Type buildings, drain works, retaining wall and boundary wall etc.

Providing and laying controlled cement concrete pavement of approved grade with 20MM down graded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compacted and finished in a continuous operation including provision of construction and expansion joints, plasticiser and curing compound of Fosroc/ Sika/ Choksey/ Degusa and hardener of Recron/ Degusa/ Fosroc; finishing to lines and grades and curing as specified and directed complete (form work and reinforcement shall be measured and paid separately).M 20 grade concrete

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per BIS 15658-2006 of thickness 80MM and 28 days compressive strength not less than 30 N/ SqM over a layer of bedding sand of compacted thickness 30MM, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

Supplying, fitting and fixing SoundSoak NSS Cord (FSS Cord) wrapped acoustical wall panel system of Anutone Acoustics Limited Including all fixtures and fittings 25mm

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) Hindware make White Water closet POPULAR "S (Cat.No.20044) (inclusive of seat cover)

Providing, fitting and fixing white vitreous china pedestal type water closet (European type WC pan 400MM high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40MM diameter flush band with fittings and brackets as required (flushing cistern to be paidseparately).Jaquar make White Size 550*350*360 MM (Cat No. CNS-WHT-WS02)

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. C) Jaquar make a) White (iii) Large (Cat.No.URS-WHT-0703)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) BASIN (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008)

Construction of brick masonry septic tank on a bed of 1:3:6 PCC with neat cement inside plaster, necessary RCC works etc complete as directed and specified including excavation, backfilling and diaposal of surplus earth. 20 Users

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin without pedestal (B) Hindware Make (a) White (i) Alto 510 x 400 (Cat. No.10091)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (B) Nirali (x) Grace Plain Large (Bowl Size - 560 x 410 x 215) Glossy

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (ii) Agmeco Make (a) Liquid soap container Capsule Type (Cat.No.LSC-0001)

Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail diplomat 600mm long (Cat.No.TR-0605)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051)

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. (b) Agmeco make (vi) Dolfee (Cat.No.DE-00211)

Providing, fitting and fixing Chrome Plated Tumbler and brush holder of Parryware make (Cat. No.C9947) complete as directed and specified.

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801)

(ii) Rupa 40mm (HT/ FT) (Cat.No.WS-0801)

Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make (i) Pipe for bottle trap 300mm long (Cat. No.BT-0761)

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (d) Sona make (ii) Toilet paper holder with cover (Cat. No.AL-1002)

Providing, fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc.complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. A C Jaquar make a a White i i Compact (Cat.No.URS-WHT-0702)

Supplying, fiting and fixing automatic flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) A B Hindware make a a White i i Auto cistern 10 litre (Cat. No.C61002)

Supplying, fiting and fixing vitreous china division plate including fitting and fixing compete as directed and as specified. A A Parryware make a a White i i Partition Magnum/ Large (Cat. No.C0571/07)

Providing vitreous china wash basin with CI/ MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) required. Basin (with pedestal) Jaquar make White Florentine (Cat. No.FLS-WHT-0605)

Providing fitting and fixing stainless steel kitchen sink of Parryware make with CI/ MS brackets, CP brass chain with rubber plug, PVC waste pipe etc. complete including Design Action Group, New Delhi 110025 associated builders, Guwahati 781024 Swimming Pool Page 9 Assam Public Works Department, Guwahati 781003 painting the fittings, cutting and making good the walls wherever required (sink cock, stop cocks, waste coupling are to be paid separately). A A Parryware make i i Single bowl with veg bowl and drain board (400*200) flat edge- glossy (Cat.No. C8545).

Providing, fitting and fixing decorative mirror completeas directed and specified. Jaquar make Swivel mirror (Cat. No.ACN-1195N)

Providing, fitting and fixing glass shelf complete as directed and specified. Glass shelf with CP guard rail Jaquar make Continental 550MM long (Cat. No.ACN-1171N)

Providing, fitting and fixing recessed soap tray/ soap dish complete as directed and specified. Parryware make Recess SP and SG dish (Cat.No. C9935)

Providing, fitting and fixing CP soap tray/ soap dish complete as directed and specified Jaquar make Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing CP towel rail complete as directed and specified. Jaquar make Continental 600MM (Cat.No. ACN-1111N)

Providing, fitting and fixing chrome plated towel rack complete as directed and specified. Jaquar make Continental 600MM long with hanger (Cat.No. ACN-1181

Providing, fitting and fixing chrome plated towel ring complete as directed and specified. Jaquar make Continental towel ring square (Cat.No. ACN-1121)

Providing, fitting and fixing chrome plated towel robe hook complete as directed and specified. Jaquar make Continental (Cat.No. ACN-1191N)

Providing, fitting and fixing chrome plated toilet paper holder complete as directed and specified. Jaquar make Continental toilet paper holder (Cat.No. ACN-1153N)

Providing, fitting and fixing chrome plated waste coupling complete as directed and specified. Jaquar make 32MM (HT/ FT) (Cat.No.ALD-705 / 709)

Providing, fitting and fixing chrome plated bottle trap complete as directed and specified.Jaquar make Bottle trap with internal partition 32MM size with 250MM long wall connection pipe (Cat.No. ALD-769)

Supplying, fitting and fixing PVC pipes 6KGf/CM2 (Supreme/ Prince) or other BIS approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below ground level as directed and specified. In exposed surface or in trenches i)160mm

iii)90mm

Concealed by chiseling or breaking brick wall/ CC/ RCCand making good to the damages. 160mm

Supplying, fitting and fixing 87.5o PVC bend of Supreme Prince or other BIS approved including joining, fitting and fixing etc. as necessary complete at all levels including below GL as directed and specified. In exposed surface or in trenches 160mm

Supplying, fitting and fixing 87.5o PVC bend with door of Supreme/ Prince or other BIS approved including joining, fitting and fixing etc. as necessary complete at all levels including below ground level as directed and specified. In exposed surface or in trenches 160mm

Supplying, fitting and fixing PVC plain single Tee of Supreme/ Prince or other BIS approved including joining, fitting and fixing etc. as necessary complete at all levels including below ground level as directed and specified. In exposed surface or in trenches 160mm

Supplying, fitting and fixing PVC plain single Tee with door of Supreme/ Prince or other BIS approved including joining, fitting and fixing etc. complete at all levels including below ground level as directed and as specified. In exposed surfaces or in trenches 160mm

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. 110mm dia. PVC cowel of ISI make

Supplying, fitting and fixing Kitchen chimney including water proof ply board, plain sheet, decorative prelaminated sheet, nail, fevicol, dendrite, wooden beading etc.as required complete as specified and directed by the department.

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified.

Supplying, fitting and fixing PVC reducer of Supreme/ Prince or other BIS approved including joining, fitting and fixing etc. as necessary complete at all levels including below ground level as directed and specified In exposed surfaces or in trenches 160 MM*110 MM

1.37.15 Supplying, fitting and fixing PVC reduceing Tee of Supreme/ Prince or other BIS approved including joining, fitting and fixing etc. as necessary complete at all levels including below ground level as directed and specified. In exposed surfaces or in trenches. 160 MM*110 MM

Supplying, fitting and fixing PVC reduceing Tee with door of Supreme/ Prince or other BIS approved including joining, fitting and fixing etc. as necessary complete at all levels including below ground levelas directed and specified. 160 MM*110 MM

Providing fitting and fixing PVC cowel of BIS make complete as directed and specified. 160MM diameter PVC cowel of BIS make

Providing fitting and fixing PVC cowel of BIS make complete as directed and specified. 75MM diameter PVC cowel of BIS make

CP grating 110MM diameter

Providing, fitting and fixing CP gratings to the floors complete as directed and specified. 75MM diameter

Supplying, fitting and fixing 450 MM diameter 90 MM thick CI manhole cover and frame of 58KG weightcomplete as directed and specified.

Construction of filter bed in soak pit including earthwork in excavation of soil and then filling up of the trench with brick bats/ dry charcoal covered with earth over a layer of AC plain sheet above the brick bat filling complete as directed (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as thenumber of users as mentioned in the table).

Construction of inspection pit of inside measurement 450MM*450MM*450MM clear, top flushed with ground level with 100MM cement concrete base proportion 1:3:6 over flat brick soling, 12CM brick wall in cement mortar proportion 1:4 finished with 13MM cement plasterproportion 1:2 on side walls and floor, 450MM* 450MM air tight CI inspection pit cover and frame complete including supplying materials necessary for excavation of pit as directed.

Construction of brick masonry septic tank on a bed of 1:3:6 PCC with neat cement inside plaster, necessary RCC works etc complete as directed and specified including excavation, backfilling and diaposal of surplus earth. 200 users

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed.CPVC pipe with CPVC fittings(Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) 90 MM (ID) diameter.

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1 Meter spacing. This includes jointing of pipe. Exposed or in trenches. 15mm

Concealed pipe with cutting chases and making good the walls 15mm

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Agmeco make Bib Cock Long Body with Flange CAT No.CC 00203/CAT No.CN 00203

Bib Cock Two way with Flange CAT No.CC 00203/CAT No.CN 00203

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)

Supreme shower with arm

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Agmeco (classic) Flat

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Agmeco 15mm dia(Male/ Female )

15mm dia(Concealed stop cock reduced body )

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Agmeco make Round

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Agmeco brand a) Sink cock casted swivel spout

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) Essco make (a) Casted shower arm heavy 190mm long with wall flange

Supplying, fitting and fixing CP bibcock 15MM diameter of approved brand as directed and specified (GI and CP pipes will be measured separately).Jaquare makeContinental/ Clarion Bibcock long thread

Supplying, fitting and fixing chrome plated (CP) stop cock of approved brand and size as mentioned below as directed and specified (GI and CP pipes will be measured and paid separately).JaquarContinental/ Clarion 15MM diameter male /female (long thread)

Supplying, fitting and fixing chrome plated (CP) sink cock of approved brand as directed and specified (GI and CP pipes will be measured and paid separately).Jaquare mak Continental/ Clarion Sink cock with swinging casted spout

Supplying, fitting and fixing chrome plated (CP) shower15MM diameter of approved brand as directed and specified.(pipes will be measured and paid separately). Jaquare makeContinental Shower arm 190 MM long heavy casted body with wall flange

Supplying, fitting and fixing chrome plated (CP) wall mixer complete as directed. specified.(pipes will be measured and paid separately). I V Jaquare make. i ii Wall mixer non telephonic shower arrangement Cat No.219.

Supplying and fitting gun metal country pit valve (fullway valve) BIS make as specified and directed. 50mm

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000 Lt capacity Sintex make

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity Sintex make

Providing & fixing Toilet Cubicle (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12mm thick solid compact laminate panels.The compact laminate includes doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide Grade-6 & Aluminium powder coated top rail as per manufacturer’s specifications & Architects instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicator, (4) Aluminum Top Rail, (5) Coat Hook, (6) U-Channels, (7) Adjustable Foot, (8) Noise Deafening Tape (9) Screws & wall plugs etc. The top fitting should consist of Aluminium Powder Coated top rail which will get fixed with Mid & End pilasters. All screws will be of 304 Grade in stainless steel with satin finish. Top rail is extruded Aluminium will be powder coated or anodized (Grade 6063 Micron Aluminium). All pilasters are supported by grade- 6 Nylon Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base diameter 65mm and neck diameter of 33mm anchored to the floor with grade 304 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Model is Heat and Bacteria Resistant Polyamide in which aluminium U-Channel will be used for the fixing of intermediate panels to the wall.

Outdoor Volley Ball court of MF OD System and all weather cushioned sports surface with point elastic and dimensionally stabe properties, comprising of 8mm Base and 2mm PU Top for 2 nos. of courts of standard area 286 sq.m.

Outdoor Basketball court of MF OD System and all weather cushioned sports surface with point elastic and dimensionally stabe properties, comprising of 8mm Base and 2mm PU Top for 1 nos. of courts of standard area 476 sq.m.

Outdoor Tennis court of MF OD System and all weather cushioned sports surface with point elastic and dimensionally stabe properties, comprising of 8mm Base and 2mm PU Top for 2 nos. of courts of standard area 668.94 sq.m.

Excavating and Stacking of good earth at site including royalty and carriage complete

Spreading of good earth in required thickness as per directions of the officer in charge. Cost of earth to be paid seperately.

Surface Dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish.

Preparation of pits for general trees s by excavating 0.75 X 0.75 m and 0.75 m deep, refilling the excavated pit with good earth (after breaking clods) and mixing with manure in the ratio 4:1, alongwith soil improvement nutrients ( 0.25 kg of gypsum per pit, 20 gms each of DAP and carbofuran 3G per pit ).Planting at the specified location.

Preparation of pits for shrubs by excavating 0.6 X 0.6 m and 0.6 m deep, refilling the excavated pit with good earth (after breaking clods) and mixing with manure in the ratio 4:1, alongwith soil improvement nutrients ( 0.25 kg of gypsum per pit, 20 gms each of DAP and carbofuran 3G per pit ).Planting at the specified location.

Small Shrubs Preparation of pits for hedges and climbers by excavating to depth of 0.3 m , removing all foreign bodies,refilling the excavated area the mix good earth and manure in the ratio 4:1, alongwith soil improvement nutrients ( 0.25 kg of gypsum per sm, 10 gms each of DAP and carbofuran 3G per pit to be paid for seperately ). Planting the specified shrub in the pit.

Ground Cover Preparation of pits for Ground Cover by excavating to depth of 0.3m , removing all foreign bodies,refilling the excavated area the mix good earth and manure in the ratio 4:1, alongwith soil improvement nutrients ( 0.25 kg of gypsum per sm, 10 gms each of DAP and carbofuran 3G per pit to be paid for seperately ). Planting the specified shrub in the pit.

Providing and Applying anti termite treatment of lawn area through Premise 30.50 % IP or equivalent one litre diluted in 499 litres of water or chemical and applying the solution @ 1.00 litre solution per sqm lawn or bed area (two application) or Chloropyriphos 20% in the ratio of 1% concentration including cost of chemical and as directed by the officer in charge.

Tree Alistonia

Peltophorum

Anthocephalus chimensis

Wasingtonia Filifera

Erythina Indica

Bauhina white

Palms Fox Tail, Bottle etc

Large Shrubs/Creeper TMC Green

Yuca Silver

TMC Varigated

Caesalpinia

Bougainvilla

Lantana Depresa

Ficus Black

Ficus Black Ball Shape

Callendra

Small Shrubs Hibiscus

Acalypha

Clerodendrum Inerme

Lantana Camra

Ficus Panda

Hamelia

GROUND COVER Dinella

Wadelia

Verbina

Black Grass

Bougainvillia

Football Facilities:- (i) Construction of Football playing field having dimensions 105 mtrs x 68 mtrs inside the Eight Lane Track.

(ii) Natural Grass top surface (Bermuda Grass or equivalent) having the following additional features:- (aa) Proper sloping and drainage system also connecting this drainage to the drainage system already available at site. (ab) Equipped with pop-up sprinkler system (along with pump and connecting this system to water tank located at a distance of 500mtrs from site) to cover the entire Football field.

(iii) Goal Posts and horizontal crossbar made of FIFA approved material. Distance between posts to be 7.32 mtrs and Distance from lower edge of crossbar to ground to be 2.44 mtrs.

E/work in embankment and sub grade in raising portion with soil minimum CBR of 8% obtain from borrow pit with all lead and lift transporting to site , spreading , grading to required slope and compacted to meet requirement of table 300-2 of MORT and amp , H- specification clause no 305.

Providing and laying spreading and compacting of 200mm thick Granular Sub – Base (GSB) material of natural sand, murram, gravel crushed stone and combination thereof as per MORT&H specification (confirming to clause 401 coarse graded, grading - II as per table 400.2 MORT & H) including spreading on the prepared sub grade with the help of motor grader of adequate capacity maintaining the required slope and grade during operation rolling with vibratory roller of minimum 8 –10 tone (MORTH 401.4.2)with the grade and cross fall (camber) to be checked and any high spot or depressions which becomes apparent corrected by removing or adding fresh material including cost of tools and plants, carriage of material from stacks, templates, barrier, lighting arrangement at night Chowkidar & mtc. of diversion etc. complete in all respect as per MORT & H specification drawing & direction of Engineer – in – Charge,

Providing , laying, spreading and compacting hand broken / crushed stone aggregate 200 mm thick Wet Mix Macadam (WMM) confirming to physical requirement laid in table 400.10 of MORT &H specifications and grading laid in table 400.11 of MORT and H specification in 2 layers compacted to 250mm (125+125) including premixing of material with water in mixing plant for Wet Mix Macadam, carriage of mixed material by tippers to the site and laying material in uniform thickness and spreading by paver finisher motor grader of adequate capacity, rolling with vibratory roller of minimum static weight of 80 to 100 KN (Refer 406.3.5) in stages to grade and any spot depressions which becomes apparent corrected by removing or adding fresh material and camber spreading and brooming including template, barrier, lighting arrangement at night, Chowkidar & Mtc. of diversion etc. complete in all respect as per clause 406 OF MORT&H drawing & direction of Engineer – in – Charge to the entire satisfaction of the Engineer –in –charge, density of WMM as laid 2.2. gms / c.c. complete in all respect to the entire satisfaction of the Engineer – in – charge.

Providing and laying primer coat using emulsion SS grade( bulk) @ of 60kg per 100 sq m on the new WBM surface and complete in all respect including cost of emulsion as per MORT and amp , H-specification (5th edition ) 2013 clause no. 502

Providing and laying of tack coat on the prepared surface with bitumen 80/100 (VG-10) @ 25 kg. Per 100 Sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORT & H specification clause 503 & 112 (including cleaning of WMM road surface)

Providing and laying of 50mm thick compacted Dense Bitumen Macadam (DBM) using coarse aggregate size ranging from 26.5mm to 90 micron and bitumen grade 60/70 or VG – 30 grade with bitumen contents of minimum 4.50% of total weight of mix prepared including consolidation as per by latest MORT & H Section 500 & 507 specification with computerized hot mix plant and laying and consolidation at site of work for all lead with mechanical sensor paver and rolling with road roller as per MORT & H clause No. 507.4.9 giving density not less than 2.35 gm / c.c. and competing as per job mix formula complete with in all respect.( including cost of bitumen) to entire satisfaction of Engineer – in Charge

Providing and laying of tack coat with 25kg bitumen per 100 Sqm on black top surface i.e. between Dense bitumen and Bituminous concrete. etc. complete as per MORT&H specification

Providing and laying of 30mm thick Bituminous Concrete (BC) with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, coarse aggregate of nominal size 11.2mm grade – I and coarse sand of size 2.80mm to 90 micron, premixed with bituminous binder VG – 30 @ 5.40% percent by weight of mix and cement filler, transporting the hot mix to work site, laying (as per 501.5.3 to 501.5.4) with a sensor paver & with finisher of sensor paver will be minimum 7 M wide and rolling with road roller and vibratory roller with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers (as per MORT & H clause 501.6 & 501.7) to achieve the desired compaction as per MORT & H specification clause No. 509 complete in all respect. (40mm thick), giving density not less than 2.40 gm / c.c. to the entire satisfaction of the Engineer –in charge

Providing. Laying and jointing in position HDPE Pipe conforming to IS: 4985:2000 and suitable for the respective working pressure with all fittings and accessories e.g. couplings, tees, bends reducers, screws adapters, flanged tail pieces etc. jointing as per manufacturers instruction including excavation of trenches, refilliung (Earth work includes 450mm of soil cover over the pipe and idth of 300mm) Dinesh/Capitain/Supreme / or as approved by Engineer-in-charge . A) HDPE Pipe 160mm-10 kg/cm2(PE-100)

HDPE Pipe 110mm-10 kg/cm2(PE-100)

Sprinkler Accessories Providing and fixing of Pop up A) Sprinker with Gear driver mechanism having 2" female Inlet, dia of coverage 84.0-92.0 m at 6.0-7.0 bar ,capable of delivering discharge 9.08-15.6 ips and trajectoryof through 230.The Sprinkler shall be available in (5) numerically coded interchangeble nozzle, the sprinkler nozzle assembly shall incorporated diffuser screw facility for radius reduction and shall be suitable for use in extremely saline and /or dirty water condition, so that sprinkler shall not require secondary filtration of any kind. The sprinkler shall provd4 both part and continuous forward full circle adjustment from 400 to 3600 sprinkler shall have miniunm 16cm Pop up stroke to bring the roatating nozzle in clean environment. It shall be suitable for sports fields like Football, Rugby, Hockey, Cricket, Soccer & Baseball. It should habe a feature of special internal rubber folding top, avoids the passage of powder, sand and dirty water around the telescopic pipe.sime/Signaure

B) Providing and fixing of connecting assembly for 2" PGP

C) Providing and fixing of 1" two piece Aluminum Quick Coupling Valve (QCV) it has auto close lid made of heavy duty rubber when QCV is not in use. Dubble piece construction, having stainl;ess steel valves Premier/Aqua/Harit/Toro or as approved by Engineer-in-charge.

D) Providing and fixing of 1" steel Quick coupling valve (QCV) key with handle with 1" outlet Premier/Aqua/Harit/Toro or as approved by Engineer-in-charge.

E) Providing and fixing of 1"QCV key brass swivel albow -Harit (India) Acqa (India), Irritech (Itely)

F) Providing and fixing of Metallic service Saddle 110mmx1"

Volve and accessories A) Providing and fixing of 6" Butterfly valve for Head Unit. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the cast iron buffer type Butterfly vlave is 15 bar and hydraulic seqat test pressure of the product is 11

B) Bar Sant/Leader/Zoloto/Toro or as approved by Engineer-in-charge. Providing and fixing of valve box 20" rectangular Valve box with cover. The valve boxes shall be high strength, high desntiy polyethy lene constructed material It should be UV stablizer with anti oxidants, residtant to moisture MAIS (KSA), Carson (USA) Palaplast (Greece)

C) Providing and fixing of Valve box 6" Round valve Box with cover. The valve boxes shall be high strength high density polythylane constructed material. It should be UV stablizer with anti oxidants, resistant to moisture Armas (Turky), Aqua (India) Bermad (Ishrael)

D) Providing and fixing of Quick Pressure relief valve box 2" along with by pass arrangement cover and necesaryfittings. It hall be adjustable. Pressure settin from 22 PSI-120 PSI for maximize performacne. It should be high strength plasticbody stainlesssteel shaft offer strength and corrosion resistant-Oil tempered coil spring provides quickresponse forindividual pressure range Armas (Turky), Aqua (India) Barmad (Israel).

E) Providing and fixing of a double acting continuous Air release valve 2" made of Aluminium The continuous Air release valve shallbe capable of both releasing and admitting air from and into the line during system operations. The working pressure shall be 1- Bars and testingpressure shall be 16 Bars Harit (India ) Acqu (India) ARI (Israel)

F) Providing and fixing of a double acting Plastic Air release valve 2" made of high strenth plastic with fibre glasss rainforced. The Air release valve shall be cable of both releasing and admitting air from and into the line during system operations. The working pressure shall be 1- Bars and testingpressure shall be 16 Bars Harit (India ) Acqu (India) ARI (Israel)

Filtration Unit Providing and fixing of disc filter (120 mesh) 50m3/hr having an inlet & two outlets connections of 3". 2 pressure guage ports of 3/4" a helix made of fibre glass reinforce polyamide atg base of disc filter cartridge to create a helical effect in the incoming water, spinning particulate in suspension away fromtec filtering element and so minimuizing cleanings frequency, 3/4" outlet for flushing at bottom of filter & maximum working pressure of A) 140 bars Amid/MAIS/Harit.

Providing and fixing of pressure guage (Glycerine filled), )Wika/flebig/GuruAutomat India

Providing and fixing of 6" header assembly made of MS pipe with powder coating including foot valve

Automation Unit A) Providing and fixing of 3" BSP straight flow Solenoid valve with flow control and "pressure regulation unit"which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact. weather-resistant Nylon Glass filled with heavy duty diaphragm and stainless steel screws fasteners and components. The valve shallhave manual open/close control (Internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for"tamper proof" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. Bermad/HIT/Rain Spa./Toro or as approved by Engineer-in- charge.

B) Providing and fixing single key start controller with sprinkler system HIT (UAA) K.Rain (USA), Orbit (USA)

c) Providing and fixing of DBR connector. It shall be prefilled low voltage, dry splice direct bury, waterproof wire connector that protect electrical connection from corrosion, and moisture, Each splice kit contains two wire nuts, water proof, Gel-filled housing and ideal splice organizer Signature/HIT/Claber

D) Providing and fixing of Pump start relay enclosure shall be constructs with a corrosion resistant, UV resistant and shock proof rain tight secureand rust proof endosure K rain (USA, PLA (India) Siemens (India)

E)Providing and fixing of 1.5 sq.mm signle core copper conductor cable(Common wire) Findex/Paige/Empire

F) Providing and fixing 16mm single core copper conductor cable 24 volt. Finolex (India) Empire (India) Havel (India)

G) Providing and fixing conduit pipe 25mm for laying of electric wire AKG (India) Finolex (India) supreme (India)

Pumping Unit A) Providing and fixing of centrifugal pump capable of discharging 100m3 /hr at 75 mtr. Head with Base frame Mechanical seal coupling & coupling Guard Suction and Delivery pipe and Header Assembly Kiloskar (India) Cromption (India)

B) Providing and fixing 50 HP 3 phase 2800 RPM TEFC Motor Krloskar Making

C) Providing and fixing of Control Panel 50 HP with ammeter Voltmeter and all; necessary perotection Make L&T or Equivalent.

D) Providing and fixing of Constant Voltage Transformer for controller

E) Providing and fixing of Water Level Sensor Automat (India) Havels (India)

construction of silica sand filling in jumping pits, including cost and conveyence of all material and labour charges to the site to fill the sand in pits and complete finished items as per drawing or as per direction of engineer -in-charge

Construction of steeple case pit inside North D portion as per IAAF drawing and as directed by Engineer-in-Charge

Pole Vault boxes for competition-welded stainless steel construction, comes with blanking board made of aluminium. Sockets at bottom for drainage of water. ( model no. PVT-SSI) IAAF approved

Take off wooden board- latest design take off board system made of sold wood. Welded aluminium tray protects take off area and facilitates easy replacement of take off board and plasticine board. Comes with heavy construction aluminium blanking lid for durability. (model No. vstb-100) IAAF approved

shot/hammer throwing circle-aluminium- aluminium shot/Hammer circle made of heavy duty aluminium. This can be folded in 2 parts of easy transportation-IAAF Approved. DSHC_SPA)

Discuss Ring with cage- Aluminum circle made of heavy duty aluminum. This can be folded in 2 parts for easy transportation. (Model No. DSHC- SPA100) IAAF approved. Cage made of heavy duty 100 mm square steel tube, HOT Galvanized for long life. Poles can be detached from centre for easy transportation and hinged for easy lifting during installation. Easy to bind the poles together with the help of tie bars for sturdiness of the cage. Gates are attached to the poles using four hinges and both gates include wheels for easy movement. NET is 5 mm thick (machine knitted) with 40 mm square mech. Net is UV stabilized for long life. Steel tube is used on the top of the net to avoid sagging. (Model No.DHC-S101) IAAF approved

Aluminum Kerbing- Heavy gauge aluminum features a box profile top Held in place by 10 mm tall ribbed feet. Raised 10 mm off the track surface for rapid drainage. Each section of kerbing is milled to allow easy drop in or removal of corresponding sections. (Model No.VTK-100) IAAF approved

Hammer cum Discuss Ring with cage – Aluminum circle made of heavy duty aluminum. This can be folded in 2 parts for easy transportation. (Model No. DSHC-SPA100) IAAF approved. Cage made of heavy duty 100 mm square steel tube, HOT Galvanized for long life. Poles can be detached from centre for easy transportation and hinged for easy lifting during installation. Easy to bind the poles together with the help of tie bars for sturdiness of the cage. Gates are attached to the poles using four hinges and both gates include wheels for easy movement. NET is 6 mm thick (machine knitted) with 40 mm square mesh. Net is UV stabilized for long life. Steel tube is used on the top of the net to avoid sagging. (Model No.DHC-S101)

Water jump hurdle- made of hard wooden board. Ground socket made of stainless steel having special design. (Model No. VTWB-100) IAAF approved.

Providing and laying 10 lanes IAAF standard approved synthetic athelatics track full PUR system only with EPDM (without recycled rubber all complete including line marking as per requirement / specification laid down IAAF for class-2 certification and as per the direction of the Engineer-in-Charge. a)Normal stress areas with minimum thickness of 14mm of finished track surface

High stress area with minimum thickness of 20mm of finished track surface

High stress area with minimum thickness of 25mm of finished track surface

providing and laying of 100mm thick perforated/silt, heavy duty (M-30) steel fiber reinforced cement concrete drain covers of approved (KK, himalaya or equivalent) make and design, all complete as per the specification and direction of engineer in charge.

providing and laying 10 Nos. stainless steel wire jali plastic coated duly welded with angle iron frame complete in all respect as per satisfaction of engineer in charge

Football Facilities:- Construction of the base in the portion between gallery and track surface area of 6,821.33 sqm.

Natural Grass top surface (Bermuda Grass or equivalent) having the following additional features:- (a) Proper sloping and drainage system also connecting this drainage to the drainage system already available at site. (b) Equipped with pop-up sprinkler system (along with pump and connecting this system to water tank located at a distance of 500mtrs from site) to cover the entire area.

Football Facilities:- Construction of the base for Football playing field having dimensions 90 mtrs x 45 mtrs.

Natural Grass top surface (Bermuda Grass or equivalent) having the following additional features:- (a) Proper sloping and drainage system also connecting this drainage to the drainage system already available at site. (b) Equipped with pop-up sprinkler system (along with pump and connecting this system to water tank located at a distance of 500mtrs from site) to cover the entire Football field.

Goal Posts and horizontal crossbar made of FIFA approved material. Distance between posts to be 7.32 mtrs and Distance from lower edge of crossbar to ground to be 2.44 mtrs.

Supply and installation of multilayer sports flooring in the thickness of 6.5mm with top layer protected with PUR coating with shock absorption more than 25%, sliding co-efficient of 0.4 to 0.7, ball bounce greater than 90% with vertical deformation less than 3mm and fire resistance of B1 class. The floor will be a combination of three different layers of wear and layer reinforced with fibre glass backing and closed cell foam for better bouncing attributes complete with wielding rod.

Supply and installation of flooring of 10mm thick of SBR rubber granules bounded together with imported polyurethane based binder over IPS flooring base.

Supply, Installation, Testing & Commissioning of mild steel black heavy pipe (IS: 3589 for 200 NB & IS:1239 Part 1 for 150 NB and below) of following sizes including cutting, welding of necessary bends, elbows reducers, clamps, hangers, pipe supports, brackets etc. and cutting holes in brick or RCC walls / slabs including painting with one coat of primer and two coats of synthetic enamel paint of approved make & shade and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. (For Hydrant & Sprinkler System) 200 NB

Excavation & Back Filling of above pipeline upto maximum depth of 1000 mm to suit at site condition

Supply, application, Testing & Commissioning of 4mm thick Anti Corrisive Wrapping after a coat of approved bitumen based primer conforming to IS: 10221

pROVIDING FIXING,Testing & Commissioning of single headed, Gun Metal ISI marked oblique pattern Hydrant landing Valve with 80mm dia flanged inlet and 63mm dia instantaneous type female outlet complete with cap & Chain,twist release lug and all accessories as per IS:5290 (Type 'A') and specification complete as required.(Mke:ESSEL/WINKO/NEWAGE)

Supply, Installation, Testing & Commissioning of Reinforced Rubber Lined (RRL) hose ISI marked (IS:636, Type-A) 63mm dia X 15 M long complete with instantaneous type stainless steel 63mm dia ISI marked male & female couplings (IS;903) bounded and riveted to hose pipe with rivets & stainless steel wire and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of stainless steel Branch Pipe with 63mm instantaneous coupling ISI marked (IS:903) including 20mm dia nozzle and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of 4 Way Fire Brigade Inlet complete with Gun Metal Male Adoptor with in built Non Return Valve as per IS: 904 complete with matching flanges, rubber insertion, nuts, bolts and washer etc. and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of non rising spindle type Cast Iron Sluice valves class PN 1.6 as per IS:14846 complete with matching flanges, rubber insertion, nuts, bolts and washer etc. and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. Size : 150 NB

Construction of masonary chamber 900 x 900 x 1000 mm depth (inside measurement) with 75 class designation brickwork in cement mortar 1:5 (1 cement : 5 fine sand) for isolation valve with 600 mm dia manhole cover with lid on 100 mm thick RCC top slab 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) necessary excavation, foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate of 40 mm nominal size and inside plastering with 1 : 3 ( 1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design with FPS bricks

Supply, Installation, Testing & Commissioning of Cast Iron Swing Check type Non-return Valves (IS: 5312, PN 1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 150 NB (For FBI)

Control Panel for Fire Pumps

4 C x 16 sq.mm for Jockey Pumps (Al)

2 C x 1.5 sq.mm for Instrumentation (Cu)

10 C x 1.5 sq.mm for Diesel Engine Controller (Cu)

Supply & Fixing of perforated GI Cable Tray (maximum 300 wide) with necessary angle iron suspension supports, anchor fastners etc complete. Maximum geight of suspension shall not exceed 500 mm

Supply & laying of G.I. Earth strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with with necessary accessories as required. ( Erath pit shall be executed by other agencies).

Supply, Installation, Testing & Commissioning of mild steel black heavy pipe (IS: 3589 for 200 NB & IS:1239 Part 1 for 150 NB and below) of following sizes including cutting, welding of necessary bends, elbows reducers, clamps, hangers, pipe supports, brackets etc. and cutting holes in brick or RCC walls / slabs including painting with one coat of primer and two coats of synthetic enamel paint of approved make & shade and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 250 NB, 6.35 mm thick

200 NB, 6.35 mm thick

Supply, Installation, Testing & Commissioning of Cast Iron Swing Check type Non-return Valves (IS: 5312, PN 1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 150 NB

Supplying, Installing, testing and commissioning CI butterfly valves as per IS: 13095 (PN 1.6) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete. 150 NB

Supply, Erection, Testing and commissioning of Suction Foot Valve with flanges, bolts, nuts, washers, gaskets etc. 200 NB

Supply and installation of Pressure switches of suitable range for pump sets with Ball valves, Fittings like unions / collars / reducers etc.

Supply and installation of Pressure gauges of suitable range for pump sets with Ball valves, siphon, Fittings like unions / collars / reducers etc.

Internal Wet Riser System (Hydrant) Supply, Installation, Testing & Commissioning of mild steel black heavy pipe (IS:1239 Part 1) of following sizes including cutting, welding of necessary bends, elbows reducers, clamps, hangers, pipe supports, brackets etc. and cutting holes in brick or RCC walls / slabs including painting with one coat of primer and two coats of synthetic enamel paint of approved make & shade and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 150 mm dia

100 mm dia

80 mm dia

Supply, Installation, Testing & Commissioning of non rising spindle type Cast Iron Sluice valves class PN 1.6 as per IS:14846 complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 150 NB (Riser)

100 NB (Riser)

Supply, Installation, Testing & Commissioning of Cast Iron Swing Check type Non-return Valves (IS: 5312, PN 1.6) complete with matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 150 NB (Riser)

100 NB (Riser)

Supply, Installation, Testing & Commissioning of Reinforced Rubber Lined (RRL) hose ISI marked (IS:636, Type-A) 63mm dia X 15 M long complete with instantaneous type stainless steel 63mm dia ISI marked male & female couplings (IS;903) bounded and riveted to hose pipe with rivets & stainless steel wire and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of stainless steel Branch Pipe with 63mm instantaneous coupling ISI marked (IS:903) including 20mm dia nozzle and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of stainless steel Branch Pipe with 63mm instantaneous coupling ISI marked (IS:903) including 20mm dia nozzle and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of wall mounting type Hose Cabinets fabricated from 16g / 18g M.S. sheet (powder coated) with glass fronted double leaf door and locking arrangement, suitable to accommodate 2 nos. 15 M long 63mm dia hose & 1 branch pipe (size 0.75M X 0.6M X 0.25M) and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of swinging type First-Aid Fire Hose Reel with drum, bracket of 20mm dia X 30 M long high pressure rubber hose reel tubing ABS Shut-off nozzle as per IS:884 and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of Gun Metal Ball Valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated center handle with female BSP threads of following sizes and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 25mm dia nominal bore for Hose Reel connection

Supply, Installation, Testing & Commissioning of 25mm dia gun metal spring loaded air release / high lift safety valve with male BSP threads and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of mild steel black heavy pipe as per IS:1239 Part 1, (sprinkler main header and drain line) of following sizes including cutting, welding etc. including bends, elbows reducers, clamps, hangers, pipe supports, brackets etc. and cutting holes in brick or RCC walls / slabs and painting with one coat of primer and two coats of synthetic enamel paint of approved make & shade and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge 150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

25 mm dia

Supply, Installation, Testing & Commissioning of 15mm size (Male threaded, BSP) Quartzoid bulb type G.M. Sprinkler head of 68 deg. C rating complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge Pendent / Upright Type

Extended throw Side wall Sprinkler

Supply, Installation, Testing & Commissioning of 25 NB Flexible Pipe steel jacketed for Sprinkler drop 1000 mm long with accessories complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-Charge

Supply, Installation, Testing & Commissioning of Structural steel for supporting pipes complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-Charge

Supply, Installation, Testing & Commissioning of 25mm dia gun metal spring loaded air release / high lift safety valve with male BSP threads and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge.

Supply, Installation, Testing & Commissioning of Gun Metal Ball Valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated center handle with female BSP threads of following sizes and complete in all respect with all labour, tools & plants, transportation, taxes, levies etc. and as per specification, drawing and direction of Engineer-in-charge. 25mm dia nominal bore for Drain

Supplying, installing, testing and commissioning of hydraulically operated Sprinkler control valve, with water motor gong bell and trims as required, pressure gauges, drain valves, ball valves check valves, strainers etc. complete. Alarm valve shall be UL Listed / FM approved. 150 NB

Supplying, installing, testing and commissioning flow switch on sprinkler distribution header on each floor and shall be connected to fire alarm panel through cable. Cable shall be measured separately.

Supply, Installation, Testing & Commissioning of Analog addressable type Multicriteria detector with mounting based and with Algorithm which shall be able to distinguish genuine fire and false fire . Detectors shall have 360 degree viewing LED) .

Supply, Installation, Testing & Commissioning of Analog addressable Rate of rise cum fixed temperature heat detector with mounting based and with Algorithm which shall be able to distinguish genuine fire and false fire .(.( Detectors shall have 360 degree viewing LED) .

Supply, Installation, Testing & Commissioning of addressable type Manual Call point complete in all respect. with all labour, tools & plants, transportation, taxes, levies etc.

Supply, Installation, Testing & Commissioning of different Modules with accessories and complete in all respect. Isolator Module

Control Module for Sounder

Monitor Module

Supply, Installation, Testing & Commissioning of control cabling for connection between detectors or devices and fire alarm panel by PVC insulated FRLS flexible Copper wire of 2 X 1.5 Sq.mm. The entire cabling should include all necessary consumables and complete in all respect.

Supply, Installation, Testing & Commissioning of 20 mm dia PVC Conduit with accessories for laying flexible wires. The entire conduiting should include all necessary consumables and complete in all respect.

Supply, Installation, Testing & Commissioning of addressable type Sounder / Hooter with gland, lugs, etc. and complete in all respect .

Supply, Installation, Testing & Commissioning of addressable type Beam detector with base, gland, lugs, etc. and complete in all respect .

Supply, Installation, Testing & Commissioning of duel LED type Remote Response Indicator including all accessories and complete in all respect.

Supply, Installation, Testing & Commissioning of Microprocessor based Networkable analogue addressable type fire alarm control panel with 320 (80 x 4 lines) character LCD display. The panel should be a single panel having requisite loops and/or to accommodate all the accessories with networking capacity , each Loop shall have capacity to take at least 127 analogue addressable devices in one loop. The PANEL should have provision to integrate with any PA system via Monitored Relay and shall be able to hook up with Fire Fighter's Phone vide monitored Input/ Output Modules . The Fire Alarm Panel shall have sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts AC power supply. The panel shall include integral SMF lead acid batteries with sealed cells of 24V capable of running for a minimum of 8 hours with integral battery charger complete as required . The PANEL shall be able to generate History Events The Panel shall have provision for BMS Integration with following IT Protocals like Modbus/Bacnet/Lonworks. 2 Loop Fire Alarm Panel

First-aid Fire Protection System( Portable Fire Extinguisher) Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity. Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn,wall mounting bracket etc. complete, confirming to IS: 15683

ABC powder type (Mono Amonium Phasphate) fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683

ABC powder type (Mono Amonium Phasphate) fire extinguisher of 2 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683

Providing and installing in position the following type of AUTOGLO Photoluminescent Signages complete with fasteners Floor identification signage ( i.e., 1/2/3 …etc.) Size 150mm x 300 mm at each stair enclosure on every floor

Providing and fixing in position the signage “FIRE ORDER" it should contain the standard matter on 3mm thick "Opaque" PVC foam board of computerized cut,PVC non-reflective self adhesive vinyl painted foam board of 450mm x 600mm'.

POOL BASIN EQUIPMENTS Supply & Installation of Drain Grill 300 mm x 300 mm Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of White ABS plastic bottom inlet for concrete with S.S. screws and regulable flow. Max flow 9m3/hr. Connection: Outside2" thread, inside dia 50mm Make : Aquanomics , Aqua Italy, Haywards, or similar

LADDERS & OVERFLOW GRATING Supply & Installation of Overflow model stainless steel AISI-304 ladders, width: 500mm, handrails dia 42 mm stainless steel non-slip steps. Complete with anchoring fixtures with earthing connection . 5 - Step ladder Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of Overflow model stainless steel AISI-304 ladders, width: 500mm, handrails dia 42 mm stainless steel non-slip steps. Complete with anchoring fixtures with earthing connection . 4 - Step ladder Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of White Color Modular Gratings made in UV stabilized ABS. With Anti-spill design Snaps together on central spine thus enabling a flexible continuous run. width: 295 mm Make : Aquanomics , Aqua Italy, Haywards, or similar

MAINTENANCE ACCESSORIES Supply & Installation of SS-304 30" heavy weight vacuum head and 100' long nylon Rope Key hole provision for the operation of the Vacuum Head. Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of Blue color Copolymer Floating vacuum hose 1.5" dia 30 mtrs long. Including hose cuffs for connection to suction inlets. Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of Deep bag net made in polypropelene and white polyester netting Make : Aquanomics, Aqua Italy, Haywards, or similar

Supply & Installation of Curved brushes 18" made in polypropelene for pool basins and scum liners Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of Reinforced aluminium telescopic handle 4.8 M long Make : Aquanomics, Aqua Italy, Haywards, or similar

Supply & Installation of Trolley Mounted 3 HP Pump for suction Make: Aquanomics, Aqua Italy, Haywards, or similar

Supply & Installation of 18" Algae Brush with Aluminium back and S. S. bristles Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of Test kit for free chlorine & pH Make : Aquanomics , Aqua Italy, Haywards, or similar

COMPETITION EQUIPMENTS Supply & Installation of Starting Block with non-slip platform of 500mm x 500mm with height 450 mm, grip for back stroke start in SS-316 with fixing screws. As per FINA standards. Make : Aquanomics, Aqua Italy, Haywards, or similar

PLUMBING EQUIPMENTS FOR SWIMMING POOL All pipes shall be of ISI mark, Finolex / Supreme/ Prince of 6KG/CM2. Supply & Installation of all PVC / PP valves shall be of minimum PN6 rating. All standard fittings like bends, elbows, tees etc should be of similar rating of the pipes. However, in cases where special fittings are required and the same are to be fabricated on site due to non availability anywhere in the Indian market, then the contractor has to ensure that the fittings are fabricated of high grade chopped PVC fibre/ rovings and should be capable of withstanding working pressure of atleast 6kg/cm2. All pipes and fittings, including those fittings (specials) that are fabricated on site should be pressure tested to atleast 6kg/cm2 for 24 hours. All pipes shall be well supported with clamps or civil support, especially at joints. Quote Rate only per RM for Supply and Installation of following PVC Grey Agri pipes Ø315 mm

Make- Supreme/ Finolex/Prince Supply & Installation of Puddle Flange ( IN PVC) Ø315 mm

Supply & Installation of C.I. Butterfly valves complete with flanges, bolts nuts, gaskets etc. as per specifications and of the following sizes: Ø 200 mm (C.I. Butterfly Valves)

Ø 150 mm (C.I. Butterfly Valves)

Ø 100 mm (C.I. Butterfly Valves) Make- Advance/ Audco/ Zoloto

Supply & Installation of C.I. Wafer type / Dual Plate type check valves complete with flanges, bolts, nuts, gaskets etc. as per the specifications and of the following sizes: Ø 200 mm (C.I. Wafer Type Valves)

Ø 150 mm (C.I. Wafer Type Valves)

Ø 100 mm (C.I. Wafer Type Valves) Make- Advance/ Audco/ Zoloto

ELECTRICAL EQUIPMENTS FOR SWIMMING POOL Supply & Installation of Electrical control panel for all pool underwater lights, dosing pumps and re-circulation pump.The contractors scope of electrical works shall include connections / electricfication of all pool pumps (06 nos.),chemical dosing pumps (02 nos.) and any other pool equipment that requires electrical connections, including installation of all electrical panels and necessary circuit breakers of Approved makes.

Supply & Installation of Electrical control panel for all pool underwater lights, dosing pumps and re-circulation pump.The contractors scope of electrical works shall include connections / electricfication of all pool pumps( 04 nos.),chemical dosing pumps ( 02 nos.) and any other pool equipment that requires electrical connections, including installation of all electrical panels and necessary circuit breakers of Approved makes.

Supply & Installation of Electrical control panel for all dosing pumps and re-circulation pump.The contractors scope of electrical works shall include connections / electricfication of all pool pumps (05 nos.), chemical dosing pumps (02 nos.) and any other pool equipment that requires electrical connections, including installation of all electrical panels and necessary circuit breakers of Approved makes.

Supply & Installation of 10.0 mm2 copper armoured cable for Booster Pumps.

Supply & Installation of Cable tray 150 mm width in GI for cables/ Pumps in mtrs of Approved makes.

Supply & Installation of Pipe supports on ceiling & wall in MS

Filters (Vertical Type) Supply ,Installation,Testing & Comissioning of TOTALLY NON-CORROSIVE Filter made of Fibreglass and reinforced with Bobbin wound polyester yarn. Fitted with collector arms and diffusers made from unplasticised PVC and Polypropelene. Hub for holding the collector arms should be made of Stainless Steel. Filter Diameter 2000 mm. (The diameter should be minimum 2000mm as measured at any point of the Height On Straight). Flanged Connection for inlet & outlet : 160mm. Manhole lid: 500mm dia. Media Bed depth 1000mm. Filter to be supplied complete with lid in polyester resin and fibre glass, of mini-mum 500mm dia, to ensure easy access to the filter internals,manual air purge cap, for sand discharge, presurre gauge. Working pressure 2.5kg/cm2, (37.5 PSI), Test pressure 3.75 kg/cm2 (56.25 PSI). Flow rate of 105 m³/hour Filtration velocity : 40 m3/hr/m2 Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply,Installation,Testing & Comissioning of blue colour bobbin wound sand filters, manufactured totally in NON-CORROSIVE material and UV resistance surface. Filter should be supplied complete with manual air bleeder, water drain, emptying plug, fitted with collector arms and diffuser made from unplasticized PVC and polypropelene and with top mounted multi-port valve of 2" for carrying out filtration, back washing and rinsing of filter media. MPV should be supplied with pressure gauge. Flow = 44 m3/hr Filtration Velocity = 40 m3/hr/m2 Diameter = 1200 mm Max. Working Pressure = 2.5 Kg/cm2 Make : Aquanomics, Aqua Italy, Haywards, or similar

Valve Battery Supply, Installation,Testing & Comissioning of Valve Battery Manifold made in PVC with flanges for connecting to filters. Consist of 5-butterfly valves for carrying out filtration, back-washing, rinsing nd shut down of filters, mounted on pipe (PN10) and PVC flanges (PN10), screws, nuts and washers in lane zinc steel. All batteries to be served already mounted. 160 mm dia. Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of sand media for filter Make : Aquanomics

Re-Circulation Pump Supply ,Installation,Testing & Comissioing of Horizontal Centrifugal pumps with Inbuilt strainer. Pump body and prefilter in cast iron, impeller in HT200, shaft in stainless steel AISI-304. Mechanical seal in graphite / ceramic. 1 Set ( 5 Working + 1 Stand-By) Protection Class - IP 55 Insulation Class - F RPM - 2850 Flowrate - 110m3 / hr @ 14-16 m.head Voltage - 230/400V. 50 Hz Phase - 3 Phase HP - 10, 7.5 kW Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply of Re-Circualting plastic pump with 2 Pole induction motor single phase with thermal protector (3 working and 1 standby). 2900 RPM. Motor : IPX5 Insulation class : F Flowrate : 44 m3/hr Head : 10-12 Mtr Voltage : 220/240 V Power : 4 kW / 5.5 HP Make : Aquanomics, Aqua Italy, Haywards, or similar

POOL DISINFECTION SYSTEM Supply ,Installation,Testing & Comissioning of Chemical Dosing system for pH and Chlorine. Electromagnetic dosing pump in Polypropylene, IP 65 protection. Maximum Flow 20.0 lph at 5 bar. 0-100% manual flow adjustment. Make : Aquanomics , Aqua Italy, Haywards, or similar

Supply & Installation of Semi transparent polyurethane tank for feeding chemicals to the dosing pumps.200lts capacity. Make : Polycon/Syntex or similar

DIVING BOARD Supply & Installation of 16ft Diving Board with short stand without hand guard rail and complete with fulcrum unit.(Civil exclusive) Make : Aquanomics, Aqua Italy, Haywards, or similar

Wiring in surface/ recessed PVC conduit FR (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) cable Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 1-2 module type Metal

3 module type Metal

4-5 module type Metal

6-8 module type Metal

12-16 module type Metal

Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 2 module

3 module

4 module

6 module

8 module

10 module

16 module

Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department.

Supplying with fitting and fixing of 100 watt electronic modular fan speed controller 4 - Step 2 - module type MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department.

Supplying and fixing of 250/305 mm dia (Nominal size flush type circular ceiling fittings complete with holder, Aluminium anodized back plate and brass holder, 20 Watt CFL lamp including connection as approved by the Deptt.)as required. [CLT]

Supplying and fixing of Fan box (AKG or equivalent as approved by the Deptt.)with inbuild rod as required.

Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt. ABB, Schneider MG, legrand, Hager make) 30/32A Capacity.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 12 way SPN Double Door

18 way SPN Double Door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 8 way TPN (4+24) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series(Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series(ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 6 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 25X5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Standard model 1200 mm Sweep Usha make)/ Standard model 1050 / 1200 mm Sweep Havells make)/ High speed 1200 mm sweep (ORIENT PSPO make) [F]

Standard model 1400 mm Sweep. "ORIENT PSPO make) / Usha make)/ CROMPTON make)/ Havells/ ATC/ V GAURD make) [FF]

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Trans Air 300 mm sweep (Crompton make)

Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department.

Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Extra long point up to 3.00 metre. length.

Extra long point up to 6.00 metre. Length.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp/ [ BK ]

Fitting and fixing of brackets on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including connection as approved by the Deptt.)as required complete. [BKD]

Supplying and fixing of Frosted glass shade of 100 mm dia (Nominal Size as required.

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Wiring for Co - axial Jelly Flooded (Unarmoured) (FINOLEX /RR KABEL /NICCO / ANCHOR make) cable in existing surface conduit wiring system including connection etc as required. Co-axial Jelly Flooded (Unarmoured) RG 6 (Copper)

Supply and fixing of 19 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Supplying including fitting and fixing of TV co-axial outlet MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying ,installation, testing & commissioning of 2 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

ABB, Schneider MG, legrand, Hager make) 8 way TPN (8+24) double door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make)" 25A

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of 25X5mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.

Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

Supplying fitting and fixing of ceiling fan Regulator including complete connections etc. complete as required and as directed by the department. Electronic Registrance Type

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make [ F ]

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) Core - 3 & 1/2 A2XWY A2XFY 150.00 Sq.mm 3&1/2 Core U.G. cable in 80mm dia medium duty G.I. pipe

Supplying including installation of cast iron cable marker as specified and directed by the deptt.

Recessed type Night Lamp / Skirting Light of reputed make with 1 no. of 5W CFL lamp (warm white lamp). (NL)

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Extra long point up to 15.00 metre. Length.

Extra long point up to 20.00 metre. Length.

Extra long point up to 25.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including 20 watts CFL lamp and connection as approved by the Deptt.)as required. [ BH ]

Supplying with fitting and fixing of RJ-11 Telephone jack MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA)A), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection complete as per direction of department.

MCB DB (ABB, SCHNEIDER MG, LEGRAND, HAGER MAKE) & (SCHNEIDER NEO BREAK, C&S, Havells, INDOASIAN, HPL OR EQUIVALENT MAKE AS PPROVED BY THE DEPTT.) "MCB IN-comer TPN (Horizontal DB) Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. " ABB, Schneider MG, legrand, Hager make) 4 way TPN (4+12) double door

"MCB IN-comer TPN (VERTICAL DB) Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted single door surface mounting vertical TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar up to 125A and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt." ABB, Schneider MG, legrand, Hager make) 4 way TPN (4+12) single door

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "C Series (ABB, Schneider MG, legrand, Hager make)" 6 to 32A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved by the Deptt. as specified and directed by the deptt. "25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make)" 63A

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying & laying of following size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid G.I. tube having 85 mm dia. single prong at top and 3 mm base plate at bottom complete with fitting & fixing with G.I. nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make) [ F ]

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Heavy Duty 450 mm sweep 900 RPM Single phase (ORIENT make) [ EFH ]

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Ventil Air DB 300 mm sweep (Havells make) [ EF ]

Supplying including fitting fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (CROMPTON /ORIENT/Havells/USHA or equivalent make) Striker HI- Speed , 400 mm sweep Usha make) / Wind flow with plastic blade 400 mm sweep Crompton make). [ WF ]

Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department. Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and Electronic ballast with 1 X 36 watt Fluorescent tube.(Crompton Greaves make) Model- DZL36EB DAZZLE with Power Lux Lamp or equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. [TL(I)]

Supplying and fitting fixing of H.T./ M. V. danger plate complete as required and as directed by the department.

Supplying, installation, testing and commissioning of the following CFL / LED luminaries complete with all accessories such as driver etc. directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. Chandelier 1 NI upto 65W Retrofit Spiral CFL upto 65W Retrofit Spiral CFL LHYC05165099 or equivalent complete. [CH]

Supplying, installation, testing and commissioning of the following CFL / LED luminaries complete with all accessories such as driver etc. directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. Superior finish extruded aluminium body with anodised aluminium reflector and aluminium cross louver assembly. CFL Luminaires of make Bajaj Cat No. BSM 218 CFL ‘L’ type CFL 2 x 18W or equivalent inlcuding lamps etc. complete. [ CL ]

Supply, Installation antistatic rubber mat suitable for 1.1 KV Voltage grade

Supplying, installation, testing and commissioning of Recessed type Night Lamp / Skirting Light of reputed make with 1 no. of 6W CFL (milky lamp). (NL)

Supplying and drawing Co-axial cable size RG-6 with PVC insulated( as IS/ISO-9002) through 25 mm dia 2 mm thick PVC pipe with recessed conduit system as per direction of department. Size RG-6 with PVC insulated( as IS/ISO-9002)

Supply, Fitting Fixing of Shock Treatment Chart

Supplying installation, testing and commissioning of 13 passenger (884 Kg.) Model : GEN 2 COMFORT with stainless steel ()machine room less) lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators 1 No. 2. Type GEN 2 COMFORT MRL 3. Capacity Passenger - 13 Persons - 884 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Control ACVVF - OTIS Variable Frequency with speed encoder. 6. Operation Simplex Full Collective Control. 7. Controller Microprocessor based modular control system ( Location door column at top floor 8. Communication Loop type serial communication 9. Travel GF to 4th Floor , about 12.0 Metres. 10. Stop & Opening 5 Stops 5 Levels 5 Openings (All opening on the same side 11. 10. Power Supply 400 V ± 10% variation ,three-phase 50 Hz ± 5% variation 12. Machine Gearless with permanent magnet motor located in the shaft at top. 13. Rope Flat poly urethane - coated belts 14. Cab finish Powder painted with painted ceiling design (CD - 41) handrails in car and vinyl flooring. 15. Cab ventilation Pressure fan 16. Cab Size 1600 mm Wide x 1350 mm Deep approx. 17. Shaft size required 2300mmx 1700mm(WX 18. Entrance type Centre opening. 19. Fire rating One hour fire rated. 20. Entrance opening 900mmx 2000mm 21.Over head 4000mm 22. Pit depth 1300mm 23. Entrance protection system High Performance contact free infra red curtain - 2 dimensional 24. Door operation Power operated automatic sliding doors. 25. Door operator DC door operator system. 26. Human interface device (H ) Hall button with micro stroke push buttons combined with 16 segment digital LED display position indicator. Full height car operating panel with micro stroke call push buttons (located on side panel) Door open and door close button on the car operating panel. 2 way Intercommunication System Dot matrix position indicator display integrated with the car operating panel. Battery Operated Emergency Alarm and Light. Fireman's switch at main lobby Automatic rescue device.

Supplying installation, testing and commissioning of (408Kg.) 6 passenger elevator of OTIS elevator Model ESSENTIAL) as per the following specifications: 1. Type Passenger Elevator 2. Capacity Passenger - 6 Persons - 408 Kg 3. Speed 0.70 Metre/Sec (approx.) 4. Stops & opening: 4 stops & 4 opening (all openings on the same side Power Supply: 400 v, 3 phase, 50 Hz. 5. Control : A.C. Variable Voltage, Variable Frequency 6. Location of Machine Room Top 7. Available Travel 9.6 Metres. (Maximum) 8. Serving Ground Floor to 3rd Floor 4 Stops 4 Levels 4 Openings 9. Well Size (Required) 1800 mm Wide x 1800 Deep (over plaster) 10. Power Supply 415 V three-phase 50 cycles AC 11. Auxiliary Required Single-phase 220 V 50 cycles AC 12. Car Size (Clear Inside 1300 mm Wide x 1100 mm Deep approx. 13. Required Pit Depth 1600 mm (Mandatory) 14. Required Head Room 4800 mm. 15. Car Enclosure Stainless Steel Car-SS4 16. Flooring PVC Flooring 17. Electric Light Fluorescent Light Fittings 18. Fan 300 mm/ 400 mm sweep 1 No. 19. No. of Entrances One Location - Front. 20. Car Entrance Automatic Power operated Centre Opening Stainless Steel Door-SS4 21. Landing Entrance Automatic Power operated Centre Opening Stainless Steel Door -SS4 22. Clear Opening 800 mm Wide x 2000 mm High 23. Indicators: Car & Landings Direction & Position Indicator 24. Other Features "Battery Operated Emergency Alarm and Light. OSG Electronic Switch. Call Registration LEDS . 2 Station Intercom System Infra-red Light Curtain Door Safety. KONE Rescue Device. Lift Announcement System."

SITC of Control Equipment Expandable upto 120 zones Interconnection with Cat-6 cable Compliment to IEC 60849 evacuation standards full system supervision Digitally pre-recorded messages

SITC of voice alarm system controller make: Bosch compliant- standards for emergency sound system. 12 zone system controller, built in 560w booster amplifier, 12 call & emergency control in and out freq. resonse 60Hz -18 KHz

SITC of voice alarm router make: bosch or equivalent, 12 zone router with single or dual channel operation . 12 EMG input contact, 12 business input contact, 12 volume override output contact, supervision within plena voice alarm system

Amplifiers Supplying installation, testing, programming and commissioning of Audio equipment, Dual Channel Digital Power Amplifier, 1600 W@ 2 ohm, 1200W @ 4 ohm, 650 W @ 8 ohm per channel

SITC of speaker 30 watt with LMTmake: Bosch/ Ahuja/ equivalent cabinet speaker, excellent frequency response 200-1500 Hz, High sound pressure level 98 Db/92Db, inbuilt 100V line matching transformer

SITC of Horn speaker 32 watt make: Bosch/or equivalent. high effeciency drivers, 22.5 W (max power), wide opening angle, excellent speech reproduction, simple power setting, water and dust protected to IP, power tapping 15/7.5/3.75w.

Audio source SITC of PLE-SDT DVD player with USB, make Bosch or equivalent, mp3 player from SD card and USB inputs, FM Tuner with RDS, presets and digital control, simultaneous operation of SD/ USB player

Microphones Cordless hand microphone make : Bosch or equivalent

Cordless collar microphone make : Bosch or equivalent

Goose neck polar pattern podium microphone make:Bosch or equivalent

Other items SITC of equipment rack 32U

SITC of patch cables and connectors

SITC of speaker cables- 40/76 ATC speaker cable

IBMS System SITC of Xray baggage scanner consisting of tunnel size 65x50 cm . Xray source voltage 160KVA , Xray source capable of 30-32mm steel penetration dual energy detector assembly. Computer assembly, electricals, software as per catalogue, standard accessories- UPS system incoming roller table, outgoing roller table

SITC of walkthrough metal detector with 6 digit in/out and net count display on LCd , metal detection threshold setting through keypad, continuous measurement, self balancing against any change in ambient temperature, humidity, proximity of metal around, walk and stop display to regulate the traffic flow. Passage clearance in mm- 1940x561x690 (HxDx W) arch assembly in mm 2115x560x810 (HxDxW) with UPS system

SITC of HAND HELD METAL DETECTOR with light weight but strong ABS or FRG body, compact size for easy operation, audio, visual and vibration alarm facility to draw attention of the operator.

Supply of Outdoor Unit Supply of 4th Generation Full Inverter VRF System with Modular type outdoor units, all scroll DC Inverter compressors for cooling & Heating applications along with different types of indoors compitable with VRF ODUs. All inverter capacity controlling compressors shall be suitable for 3 Phase, 50 Hz.. The outdoor should be with 'Ocean Black Fin' heat exchanger with a black coating to shield it from Salt, Sand & other elements brought in by the air. The manufacturer must be OEM of the compressor of VRF for this project : Mitshubishi Electric/LG/OG. Min COP 3.69 at 100% load at 35 DegC out side ambient & 19 Deg C WBT inside 10 HP

VRF INDOOR UNIT Supply instalation testiong & commissioning of Indoor units address setting and capacity as mentioned below. Multi speed motor, coil section with DX coil, outer cabinet, drain pan mechanism insulation, pipe connections of various capacities as per specifications. Cassette Unit-4 way/Hi Wall with Cordless Remote Cassette Type1.28 TR /387 CFM Min

Cassette Type 2 .01 TR/668 CFM Min

Cassette Type :2.5 TR/ 948 CFM -min

Cassette Type : 3 TR/ 951 CFM - min

Cassette Type : 4 TR/ 1198 CFM - min

Cassette Type : 4.5 TR/ 1347 CFM - min

Cassette Type :1.01 TR/ 306 CFM -min

Cassette Type :1.28 TR/ 385 CFM -min

Cassette Type :2.02 TR/ 598 CFM -min

Cassette Type : 3.5 TR/ 1162 CFM - min

TFA unit TFA-4.0 TR:660 CFM -min

VRF Y JOINTS Supply of Y-Joints / Refnet Joints

REMOTE CONTROLLER : Corded Remote (Cassette Type)

Supply of PC based central controller with BACnet protocol to control various functions like on/off,mode,fan speed etc. External devices such as fire alarm,motion detector can be interlinked with VRF airconditioner system using BACnet

M S Stand for Outdoor Unit mounting

M S Stand for Outdoor Unit mounting

M S Stand for Outdoor Unit mounting

Refrigerant Piping Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger. 41.3 mm O.D. (with 19 mm insulation )

38.1 mm O.D. (with 19 mm insulation )

34.1 mm O.D. (with 19 mm insulation )

31.7 mm O.D.(with 19 mm insulation )

28.6 mm O.D.(with 19 mm insulation )

25.4 mm O.D..(with 19 mm insulation )

22.2 mm O.D..(with 19 mm insulation )

19.1 mm O.D. (with13mm insulation )

15.9 mm O.D.(with 13mm insulation )

12.7 mm O.D.(with 13mm insulation )

9.5 mm O.D.(with 13mm insulation )

6.4 mm O.D. (with 13mm insulation )

Drain Piping Supply and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 50 mm dia

32 mm dia

25 mm dia

Supply & fixing of control cum transmission wiring of Copper conductor cable along with conduit for looping between indoor & outdoor VRF system & to main Central remote controller system 2 C X .1.5 Sq. mm

Power Cable 4C x10 Sq mm

Power Cable 4C x5 Sq mm

Supply & fixing of weather proof isolator near VRF ODU

Installation , Testing & commissioning of PC based central controller with BACnet protocol to control various functions like on/off,mode,fan speed etc. External devices such as fire alarm,motion detector can be interlinked with VRF airconditioner system using BACnet

SITC of MS cable tray duly painted as per site requirement for laying copper pipe -Exposed only 250 MM

Ducting Providing and fixing of Sheet metal ducting complete with supports,vanes, dampers etc. as per specifications & drawings.-Painting to suite the interiors CNC machine fabricated /Factory febricated GSS sheet metal ducting complete with flanges,supply air collars, vanes, splitters,etc. As per SMACNA standards 24 G

Class 'O'. Thermal insulation of ducting with aluminium foil faced nitrile rubber 10mm thick stuck to the clean duct surface with synthetic rubber adhesive class 'O'.

Duct Acoustic Lining "SITC of Acoustic lining inside ducts using Non Fibrous fire retardant cross-linked polyethylene foam of 30+/- 3 Kg/m3 density & thickness of 12mm having porous surface on one side & a flat surface on other side using Synthetic rubber based Adhesive preferably Low VOC & high strength characteristic (Initial portion of ducting and mainplenum) as per specifications etc complete as required." 12 mm thick

Grilles/Diffusers Supply, Installation and Testing of return air grilles/ diffusers as per specifications and drawings. Aluminium supply air grill with damper

Aluminium supply air diffuser with damper

Aluminium return diffusers without damper

Aluminium return grill without damper

Aluminium supply air grill with damper

Aluminium return grill without damper

Providing and fixing fire retardant nonporous double layer flexible connection between each unit and duct.

MOTORIZED FIRE AND SMOKE DAMPERS Supply, Installation and Testing of 16 G GI Frame Motorised Fire Damper - as per UL 555 and 90 minutes rating

Manual Volume Control Duct Dampers: Supply, Installation and Testing of 16 G GI Frame / 20G GI aerofoil blades type Volume Control Duct Dampers complete with linkages, levers, fittings, supports, all accessories any other item required to make the system complete.

Part- B : Ventilation System Providing and fixing of Centrifugal Rectangular Inline Fan / Tube Axial Fan including motors , starters , standard accessories like louvers , dampers etc , Recangular ducts, exhaust grilles and Fan supporting arrangements for Fresh air as per specification . 400 CFM SP 10 mm wc

150 CFM SP 5 mm

Providing and fixing of Centrifugal Rectangular Inline Fan / Tube Axial Fan including motors , starters , standard accessories like louvers , dampers etc , Recangular ducts, exhaust grilles and Fan supporting arrangements for Toilet Blocks as per specification and static pressure 25 mm.

Providing and fixing of Low Speed Tube Axial Fan including motors , starters , standard accessories like louvers , dampers and supporting arrangements for Swimming Pool Area as per specification & static Pressure 25 mm/850 cfm

Providing and fixing of Centrifugal Rectangular Inline Fan / Tube Axial Fan including motors , starters , standard accessories like louvers , dampers etc , Recangular ducts, exhaust grilles and Fan supporting arrangements for Toilet Blocks as per specification and 450 CFM

Air Qty. = 450 CFM Smoke Exhaust

Supplying, fabricating, installing and testing of G.I.Sheet metal ducts and flanges complete with supports, Vanes, dampers, links, levers andquadrants etc. as per specifications and drawings.The rates shall include all materials and labour for suspension and supporting arrangement of galvanised steel for Plenums, Ducts, complete with fire retardant factory fabricated. Flexible connection as per required specifications, etc. complete asrequired. 22 G

Providing, fixing, testing and commissioning of air louvers 50 mm deep of powder coated extruded aluminium construction as per specifications and approved shop drawings etc complete as required.

Supply, Fabrication, installation and fixing of MS Bird screen for axial fan fencing complete with supporting MS frame work angles, flats and 10 swg weld mesh including painting etc complete as required.

Shapoorji Pallonji And Company Private Limited