AGE(I) N-35 OF 2023-24 COMPREHENSIVE MAINT OF SEWAGE LINE REMOVING OF BLOCKAGE CLEARING OF SEPTIC TANKS AND MANHOLES INCLUDING ATTENDING DAY TO DAY COMPLAINTS OF OTM AND MD ACCN AT NIWARU AND MUNDOTA MIL STN UNDER AGE (I) NIWARU

Amount

Cleaning and maint of sewage system including removing of all types of bloackages from wash hand basins, bottle traps, kitchen sink, water closets, Nahani traps/floor traps/gally traps including taking out carefully and refixing the same MS/CP/PVC grating, soil waste/rain water pipes running on walls, bldgs or in trenches including junction holes of any description, sewage lines and man holes and septic tanks of any size and depth upto the last manhole to septic tanks of central sewage system to keep smooth functioning without any blockage of any description and in any situation with manually or mechanically processes offrs Married Accn Complex,office OTM Accn under AGE (I)(P) Niwaru and MES key personnel qtrs area, Mundota Mil area all as specified.by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc (Contractor has to provide 01 Nos safaiwals every month and has to get it done sewage complaint which is received day to day by sub division. (Compensation clause. Any complaint which is not completed within two days from the date of issue of complaint, compensation will be charged @Rs. 200/- per day in addition to above every additional day delayed will be charged @Rs. 50/- per day.

Scooping and taking out sludge and foreign material from septic tank, soak well and manholes of any description and any depth including removing and re-fixing of manholes covers, septic tank and soak well cover etc and appliances required for safe disposal of sludge and foreign material by carrying out the same covered van/trolley out side defence land and it should be disposed off at such place which is not detrimental to public health and as per direction of Engineer-in-Charge.

M&L for scooping, taking out sludge, foreign material and clearing, cleaning of mainhole of depth exc 1.5 metre but n.exc 3.0 metre complete with tools and plants as rquired at site the defence land and disposed off at place not more than 1.5 KM away at such a place which is not determental to public health, complete all as specified and directed by Engineer-in-charge

M&L for scooping, taking out sludge, foreign material and clearing, cleaning of mainhole of depth upto 1.5 metre complete with tools and plants as rquired at site the defence land and disposed off at place not more than 1.5 KM away at such a place which is not determental to public health., complete all as specified and directed by Engineer-in-charge

M&L for making arrangment for bypass to nearest manhole or line to keep sewage flow continuous providing required necessary T&P such as portable pump set, flexible hose pipe etc all as required at pump set, flexible hose pipe etc all as required at site :-(a) Upto 30mtr distance

(b) Beyond 30mtr but upto 60mtr distance

Scooping and taking out water and foreign material from septic tank, soak well and manholes of any description and any depth including removing and re-fixing of manholes covers, septic tank and soak well cover etc and appliances required for safe disposal of sludge and foreign material by carrying out the same out of defence land all as per direction of Engineer-in-Charge

Demolition and breaking up salt glazed stone were drain pipe,RCC NP-2 pipe / RCC NP-4 pipe incl PCC packing under hunching against the sides of bed and complete PCC bed. a) 150mm dia pipe

Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in any type of soil , complete all as specified and directed by Engineer-in-charge

All asper item no 9 above but depth exc 1.5 m and not exc 3m

Removal of excavated soil to a distancen exc. 50m, n exc 250m and depositing where directed., complete all as specified and directed by Engineer-in-charge

Returning,filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil, complete all as specified and directed by Engineer-in-charge

M & L Reinforced concrete pipes,class NP-2,laid and jointed complete with collars of bore of pipes, complete all as specified and directed by Engineer-in-charge a) 150 mm dia Pipe

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm bore pipe., complete all as specified and directed by Engineer-in-charge

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and directed by Engineer-in-charge.

Dismantling of damaged RCC Works (Cover slab of Manholes, Septic tanks or similar articles) of any description and in any position, complete all as specified and directed by Engineer-in-charge

M&L for precast RCC 1:1.5:3 type A1 using 20 mm graded stone aggregate for manhole cover with finished even and Smooth with using extra cement with 8 mm dia reinforcement @ 150 mm c/c bothways and placing & set in CM 1:6 , complete all as specified and directed by Engineer-in-charge Note : Reinforced will be measured separately.

S&F TMT MS bar 8 mm dia , cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia , complete all as specified and directed by Engineer-in-charge

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 , complete all as specified and directed by Engineer-in-charge

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-charge

M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work or concrete surfaces using wpc , finished even and smooth , complete all as specified and directed by Engineer-in-charge

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even, complete all as specified and directed by Engineer-in-charge .

Supply only Integral Water proofing compound ISI marked, complete all as specified and directed by Engineer-in-charge

M & L for cement concrete ( 1:2:4 ) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement, complete all as specified and directed by Engineer-in-charge Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc

Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-charge

M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in copings and similar works including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as directed by Engineer-in-charge.

S&F cast iron soil, waste and vent pipe spun centrifugally cast iron of 100mm bore as per IS :3989, ISI marked, in any length, without ears, with cement joints, fixed to walls including taking down, complete all as specified and directed by Engineer-in-charge .

S&F cast iron soil, waste and vent pipe spun centrifugally cast iron of 75 mm bore as per IS :3989, ISI marked, in any length, without ears, with cement joints, fixed to walls including taking down. , complete all as specified and directed by Engineer-in-charge

S&F cast iron bend (any radius) with ducks foot or heel rest of 75mm bore. including taking down. , complete all as specified and directed by Engineer-in-charge

S&F cast iron bend (any radius) with ducks foot or heel rest of 100mm bore including taking down. , complete all as specified and directed by Engineer-in-charge

S&F cast iron bend (any radius) of 75mm bore with oval access door. including taking down. , complete all as specified and directed by Engineer-in-charge

S&F cast iron bend (any radius) of 100mm bore with oval access door. including taking down. , complete all as specified and directed by Engineer-in-charge

S&F 100mm dia cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door including taking down. , complete all as specified and directed by Engineer-in-charge

S&F 75 mm dia cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door including taking down. , complete all as specified and directed by Engineer-in-charge

S&F 100mm dia cast iron cowls. including taking down. , complete all as specified and directed by Engineer-in-charge

S&F 75 mm dia cast iron cowls. including taking down. , complete all as specified and directed by Engineer-in-charge

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, Type 'B', ISI marked of 110mm bore including taking down of old pipe, complete all as specified and directed by Engineer-in-charge

S & F 110 mm PVC (SWR) bends any radius with access door including taking down. , complete all as specified and directed by Engineer-in-charge

S & F 110 mm PVC (SWR), junction single, (Single T) equal or unequal with acess door including taking down. , complete all as specified and directed by Engineer-in-charge

Satish kumar and company

Sunrise Contractors

SHREE BHAGWATI ENTERPRISES

J.J.ENGINEERING