Maintenance work

Amount

Dismantling, removing and carefully stacking Doors & windows including removal of frames, hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Supplying and fixing PU painted wains for walls as per following specifications. First cleaning the surface thoroughly and made the wall to be straight condition. Fixing 8mm thick HDHMR board in the wall and made the surface flat to hide the plywood joint. Then adding to the 65mm wide of charcoal panel in wall paneling at a height of 800mm. Then installing 6mm thick of flutted panels below charcoal panel to the scantily level. Now top portion of the wall is fully covered with 32mm of wins coat beading along with 0.62mm of Korean made imported wall paper and rest of the wall will be covered with one coat of putty, one coat of polish. One coat of metal paste to hide joints and finally deco paint will be applied on wall etc., Complete and as directed by the departmental officers.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Granite slabs (super fine polished with machine cut edges )Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Renewing and refixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Providing high pressure laminate false ceiling using 12mm thick and aluminium section of size 50mmx25mm for frame work as drawing approved etc., Complete and as directed by the departmental officers.

Collecting the scattered debries from the campus and conveying away the same to ouside by tipper machinary to a lead of 3km (Entirely within city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers.

GST at 18%

B. SANKARAAN