Development of Office Space for Registrar, PMU, Advisor to

Amount

14.26.1.1 Providing and fixing 25 mm thick shutters for cup board eta. : Panelled or panelled & glazed shutters :: superior class teak wood including nickelplated bright finished M.S piano hinges with necessary screws. Five Book Shelves, One Book shelve size (L-1.2,H-1.9,B-7)

21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions ,i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge, (Glazing, paneling and dash fasteners to be paid for separately): Workstations

21.2.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.21.2.1 Pre-Laminated particle board with decorative lamination on one side and balancing lamination on other side.

21.1.2 For shutters of doors , windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transperant or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)

21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 with float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Ana-1 Providing and placing at site custom made Workstation Desk top size L-1.52m x B-0.91 m x H- .76m made of 19mm thick B.W.R block board of reputed make & 12 mm thick fire retardant plywood conforming to IS: 5509 as per design with drawer units consisting of 3 Nos. drawers with central locking arrangements. all the exposed surfaced of the table shall be laminated with 1.5mm thick lamination of approved colour mentioned in the drawing. the internal surface of the table and the drawer shall be finished with balancing laminate of approved colour laminate on all sides. shelfs of the drawer shall be made with 12 mm thick plywood with two 1.5

Ana-2 Providing and placing at site custom made Table for PMU's, top size L- 1.22m x B-0.61m x H-0.76m made of 19mm thick B.W.R block board ofreputed make as per design with drawer units consisting of 3 Nos. drawers with central locking arrangement. All the exposed surfaced of the tableshall be laminated with 1.5mm thick lamination of approved colour mentioned in the drawing. the internal surface of the table and the drawer shall be finishing with balancing laminate of 0.8mm thk of approved colour laminate on all sides. shelfs of the drawer shall be made with 12mm thick plywood with two coats of enamel paint over a coat of primer. all wood work to be finished with melamine polish complete with best quality hardware i.e. handle, legs etc.

Ana-3 Providing and placing at site Visitors Chair (Fix chair Chrome Frame) of size 20" x 18" x 36", brand CURVES as specified and directed by the

Ana-4 Providing and placing at site Executive Table with pedestal and side runner of size -6ft x 4ft with glass top of brand SMARTWOOD as specified and directed by the department at all levels.

Ana-5 Providing and placing at site Executive chair with chrome base of size 49" x 24" x 21" , brand GENESIS as specified and directed by the department at all levels.

Ana-6 Providing and placing at site Kurl on Sofa (3+1+1) of size 65" x 33.4"x 29.5" (3 seater), 27.5" x 33.4" x 29.5" (1 seater) as specified and directed by the department at all levels.

Ana-7 Providing and placing at site Center Table sigma of size- 110cm x 50.4 cm x 40.8 cm of brand SMARTWOOD as specified and directed by the department at all levels.

Ana-8 Providing and placing at site BOOKSELF RKL/BS01 of size- 900 mm X 450 X 1850 mm of brand RENBOW as specified and directed by the department at all levels.

Ana-9 Providing and placing at site officers table of size 110 cm x 70 cm x 76 cm, brand RENBOW as specified and directed by the department at all levels.

Ana-10 providing and placing at site officers revolving chair of size 22" x 18" x 38", brand ELANTRA as specified and directed by the department at all

Ana-11 Providing Fitting and fixing flameless flame retardant paper, frost white, 48" x 100"" , ideal for classrooms, offices featuring a faint gray grid pattern on the back for identification as specified and directed by the

1.1 Wiring for light /fan/ call bell point with 2x1.5sq mm P.V.C. insulated single core unsheathed indutrial (Multistrand) cable FR conforming to IS- 694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt) with flat 19mm Isi marked casing 'n' capping (AKG/ Precision/ Presto/Plas/Polcab/MW or equivalent make as approved by the deptt) GI/MS switch board (ISI marked) half concealed on wall with phenolic laminated sheet cover, ceiling rose (Anchor/ gold medal/ Kolor kany. Kom/ Havells or equivalent make as approved by the deptt) etc. complete as directed and specified by the deptt: 1.1.1 Short point up to 3.00 metre. Length.

1.1.2 Medium point up to 6.00 metre. Length

1.1.3 Long point up to 10.00 metre. Length

1.2 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694: 1990 with flexible bright annealed electrolytic copper conductor for volatage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG/Precision/ PrestoPlast/ Polycab/ MW or equivalent make as approved by the deptt.) in surfacesystem, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch(Anchor penta/ Gold medal/ Kolor Kany. Kom/ Havells or equivalent make as approved by the deptt), GI/MS switch board (I.S.I marked) with phenolicLaminated sheet cover including earth continuity with 1.5 sq mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere: 1.2.2 Medium point up to 6.00 metre. Length.

1.2.3 Long point up to 10.00 metre. Length

1.4 wiring for 5/6 pin 16 amps power plug point with 4sq. Mm. P.V.C. insulated single core unsheathed idustrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) with flat 19mm ISI marked casing 'n' capping (AKG/Precision/ PrestoPlast/ Polycab/ MW or equivalent make as approved by the deptt.) in surfacesystem, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps Flush type switch (Anchor penta/ Gold medal/ Kolor Kany. Kom/ Havells or equivalent make as approved by the deptt), GI/MS switch board (I.S.I marked) with phenolicLaminated sheet cover including earth continuity with 2.5 sq mm cable to the 3rd pin of the socket as required complete: 1.4.1 Extra long point up to 15.00 metre. Length.

1.11 Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C insulated single core unsheathed industrial ((Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) including providing and fixing 5 pin 6 amp socket otlet (Anchor penta / Gold medal/ Kolor kany. Kom/ Havells or equivallent make as approved by the deptt) earthing the 3rd pin of the socket as required on the switch board in flat ISI marked casing 'n' capping system, when fitted on same bopard of light and fan.

2.6 Wiring for circuit wiring with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG/ Precision/ PrestoPlast/ Polycab/MW or equivalent make as approved by the deptt.) wiring system: 2.6.1 with 2 x 1.5 sq.mm cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit

2.7 Wiring for drawing sub- main line with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694:1990 with flexible bright annealed electrolytic copper conductor for voltrage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG/ Precision/ PrestoPlast/ Polycab/MW or equivalent make as approved by the deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system: 2.7.2 with 2 x 4 sq mm + earth continuity with 1 x 2.5 sq. mm . Cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS : 9537 Part - III conduit

2.7.3 with 2 x 6 sq mm + earth continuity with 1 x 4 sq. mm . Cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS : 9537 Part - III conduit

1.10: Wiring for drawing sub- main line with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS- 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/ RR Kabel/ Nicco/ Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG/ Precision/ PrestoPlast/ Polycab/MW or equivalent make as approved by the deptt.) system including earth continuity : 1.10.4: With 4x10 sq.mm + earth continuity with 2x6 sq. mm. cable in flat 32 mm ISI marked casing 'n' capping sysytem.

27.1 supplying including fitting fixing of following A.C ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the deptt.) as required complete and as directed by the department (Withour regulator): 27.1.2 Premium model 1200 mm sweep (ORIENT PSPO make)/ Premium model 1050/ 1200 mm Sweep SS- 390 Deco Havells make)

27.2 supplying including fitting fixing of following A.C exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the deptt.) as required complete and as directed by the department: 27.2.1 Domestic 27.2.1.1 Ventilator RX 150 mm sweep (ORIENT make), Brisk Air 150 mm sweep Louver type (Crompton make)

SB 8.19 Supplying with fitting and fixing of 25A Modular Motor Starter 2M, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department

SB 8.13 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) in surface/ recessed system complete as per direction of department: SB: 3 Module type metal

SB: 8 Module type metal

SB 8.14 Supplying with fitting and fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) front plate of suitable colour as per direction of department: SB: 3 Module type metal

SB: 8 Module type metal

24.9 supplying including fitting and fixing of Call Bell indicator with register 6A, 250 V A.C 1 way 5P 1 module complete as directed and specified by the deptt. (Model Ref. 573415 Legrand/ equivalent make): 24.9.1: 1. Call bell with indicator (Legrand/ C&S or equivalent as approved by the Deptt) Make)

SB 8.1 Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2- Module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department: SB 8.1.2 120 watt electronic modular step speed control; 2- module type

SB 8.2 Supplying with fitting and fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department

SB 8.5 Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

SB 8.8 Supplying with fitting and fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

SB 8.7 Supplying with fitting and fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

SB 8.4 Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete.MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE (MURANO) including making necessary connection as per direction of department.

15.38 Supplying with fitting and fixing 7 segment sheet steel, phosphatised, powder painted surface mounting double door TPN DB (IP 43) incorporated with bas- bar, neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd with provision for FP MCB/ Isolator/ RCCB/ RCBO as Incomer, DP MCB/RCCB/RCBO as sub incomer and SP MCB as ougoing complete with making necessary connection as approved, specified and directed by the deptt.: 15.38.1.2 8way (8+12+24) doube door

16.1 supplying with fitting and fixing single Pole 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.: 16.1.2 C series (Schneider MG, Legrand, Hager make) 16.1.2.1: 6 to 32 A

16.3 supplying with fitting and fixing DP 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.: 16.3.2: C series (ABB, schnelder MG, Legrand, Hager make) 16.3.2.2: 40A

16.6 Supplying with fitting and fixing 4P 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved , specified and directed by the deptt.: 16.6.2: C series (ABB, schneider MG, Legrand, Hager make) 16.6.2.4: 80 A

Supplying with installation testing and commissioning of Hi- wall split (Cordless remote) air conditioner of the following capacity complete with indoor and outdoor unit, copper pipe and electrical connection up to 5m between the room unit and out door unit as directed by the department. approved make Diakin,i. Warranty: company will have to provide warranty on the entire product for twelve months frm the date of commissioning. additional warranty on rotary & scroll Compressor will be four and two years respectively. service: Three free services will have to be provided by the company apart from the breakdown calls, if any: 1.5 TR (inverter spiit, 5- star with R- 32/R4 10 gas) Diakin make

22.1 supply, installation & testing of Copper Plate earth station with 600 mmx 600mm x 3mm copper earth plate with necessary 40 mm dia. G.I medium duty watering pipe with G.I fittings such as socket, tee, elbow, nipple and 50 mmx 40 mm G.I reducing socket for funnel including locking arrangement with 300mm x 300mm x 6mm C.I hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

22.13 Extra for using salt 5 kg and charcoal 96 kg in GI/ copper plate Earth station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt.

22.18 Supplying & laying of 6 SWG G.I.. Earth drawn through 15mm dia. Medium quality G.I pipe from Earth Electrode (below G.L) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

29.9 Supplying with fitting and fixing of Angle iron framing made 50 mm x 50mm x 5mm size angle iron for accomodation of 1.00 ton to 2.00 Ton Window/ split type A.C. Machine

31.1 Supplying with fitting and fixing voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND/ Vee- Dee/ V GUARD/ VERTEX/INDO/ VENUS Make): 31.1.7: 4.0 KVA Automatic Input 90-280 V Out Put 200-240 V

30.18 Copper pipe including cable fitting (1/4, 1/2, 5/8)

Supplying itting and fixing of LED batten tubes high quality alluminium extruded with decorative end caps connection with 1.5 mm2 1 core PVC insulated round copper conductor as required and as directed by the department: LGL 1X 020X C/LGLZo1X020XCN//LGLZO 1X020XCW (20W)

Supplying, installation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of model no- LESP01R009XC/ LESP01R009XN/ LESPO1R009XW/ L00957R000/ L00940R000/ L00930R000/ LD90-111-XXX-65-XX complete with all accessories such as ballast, atarter etc. in the false ceiling type armstrong/ Gypsum Or similar ceiling mounting with necessary support with 1.5 sq mm. P.V.C insulated S.C copper conductor as required and as directed by the department (Jquar/ LT/Wipro make).

Kamakhya udyog

Power Tools and Engineering

Pioneer enterprise