Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | L1 | Accepted-AOC Lowest amount quoted by M.Vaikundamani | |
| 2 | L2₹8.5 L+₹18,062.58 (2.17%)Rejected-Finance | L2 | Rejected-Finance Highest amount quoted |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
21 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer
Manavalakurichi Town Panchayat.
Construction of library building at Chakkapathu colony in Manavalakurichi Town Panchayat.
2023_DTP_384342_1
207/2023/A1
Open Tender
Civil Works - Buildings
Works
180 days
Chakkapathu colony
As per Document
2 documents required · 2 mandatory
₹0
₹10,000
Yes
8 Dec 2023
1 Nov 2023
21 Nov 2023
1 Nov 2023
21 Nov 2023
1 Nov 2023
1 Nov 2023 - 21 Nov 2023
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24
Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28
Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36 (for square surface)
Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36
Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8¾"x4¼"x2¾" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.
Supplying and fixing of steel door with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc. complete as per standard specifications including fixing charges etc. complete for the work.
Supplying and fixing of steel window with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc. complete as per standard specifications including fixing charges etc. complete for the work.
Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification.
Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61
Paving floor with vitrified tiles (marbonite) in all floors over the base layer of cement mortar 1:3 (one par of cement three part of sand) 20 mm thick pointed with white cement at 0/40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special.
Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point for electronic regulator. (Assume 5 Points Per Coil) (SD-25)
Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylem sheet cover for 5 A 3 pin non interlocking FT wall socket and 5A FT switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD-38)
Supply and run of 4 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in 25 mm dia GI pipe (class B) suitably bent at both ends with necessary angle iron upright and end support for service connection mains SD 454.
Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127.
Supply and fixing of single box type 4feet 40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting SD 88.
Supply and fixing o 1400 mm (56") sweep AC ceiling fan complete (lower end) with 2 module 100 W fan step regulator (lower end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450 mm (18")
Supply of interlocking paver block M40 grade bounding and laying of 80 mm thick high strength type confirming IS 15658-2006 of interlocking paver block in regained size of minimum compressing strength type confirming IS 15658-2006 of interlocking paver block in regaining size of minimum compressive strength of 40N/mm² in uniform shape of approved non sticking make to be end in flushing bone pattern with approved non sticking surface in the top and the rate including gravelling the based preparation of subbase with and cushion 100 mm thick laying out the pavement and the pieces in fit edge.
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.)
Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.
WORKS CONTRACT S FRANCIS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .