Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹56.2 LAccepted-AOC H 8 NO 15 SCHOOL KE SAMNE OUTSIDE JASSUSAR GATE BIKANER | BIKANER | BIKANER | RAJASTHAN | 1 | Accepted-AOC Lowest Accepted bidder | |
| 2 | 2₹69.3 L+₹11.5 L (20.0%)Rejected-AOC 96 L BLOCK WARD NO 06 SRI VIJAYNAGAR SRI GANGANAGAR RAJASTHAN 335704 | SRI VIJAYNAGAR | SRI GANGANAGAR | RAJASTHAN | 335704 | 2 | Rejected-AOC Lowest Accepted bidder is M/S Godara Construction Co. | |
| 3 | 3₹69.4 L+₹11.7 L (20.3%)Rejected-AOC BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | 3 | Rejected-AOC Lowest Accepted bidder is M/S Godara Construction Co. |
Tender Value
₹76.9 L
EMD Value
₹1.4 L
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Avik Saxena, CWE Bikaner
HQ CWE Bikaner, Mil Stn Bikaner, PIN-334001
Spl repair to Bldg No. P-21 (Lecture Cum Cinema Hall) at Suratgarh Mil Stn
2022_MES_555981_1
CA No. CWE BKN-Token No. 33/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Suratgarh
As per Tender Documents
8 documents required · 8 mandatory
₹1,000
GE (A) Suratgarh
₹1.4 L
Yes
21 Dec 2022
4 Oct 2022
14 Nov 2022
4 Oct 2022
7 Nov 2022
25 Oct 2022
4 Oct 2022 - 14 Oct 2022
Amount
Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated soil/material to a distance not exceeding 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.
Removing excavated soil/material to a distance exc 250 metre but not exc 500 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.
Earth filling under floors or in foundations and similar locations including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. Note :- Soil obtained from excavation under serial item No. 1.00 here-in-before shall be used for filling under floors.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed.
Demolition of cement concrete (reinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for pre cast reinforced cement concrete slabs, lintels, columns, piers, etc with PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate complete all as specified and as directed. Note :- Reinforcement shall be measured and paid for separately under respective item of this Schedule.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
M&L for mild steel TMT bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for Damp proof course to horizontal or vertical surfaces, 40mm thick in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate, using integral liquid water proofing compound, including necessary formwork, complete all as specified and as directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.
M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for precast cement concrete (1:2:4 type B0 using 12.5mm graded crushed stone aggregate) louvers and jallies, 35mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 complete all as specified & as directed.
Taking down cement plaster or cement lime plaster, terrazo etc on PCC /stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & as directed.
M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified & as directed.
M&L for rough cast finish plaster with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls, complete all as specified & as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 8mm thick, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm (i.e. 450mm x 900mm or as directed), on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for joint free non skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (Dark shade as approved), area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement or grout as per manufacturer's instructions to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (Dark shade as approved), on vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement or grout as per manufacturer's instructions to match the shade of tiles, over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm or size as directed to match the size of vitrified tiles provided in floor under respective item in this Schedule, complete all as specified and as directed.
M&L for heavy duty coloured exterior grade tile, area of each tile exceeding 0.16 sqm but not exceeding 0.24 sqm and minimum 10mm thick, as in floor and the like, set and jointed in neat cement slurry and pointed in white cement mixed with approved pigment to match the shape of tiles over and including bedding layer of 15mm thick of cement & sand mortar (1:6) complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 12mm thick, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.
M&L for 20mm thick black Granite (of any type) machine cut, bedded and jointed with grey cement slurry as in floors etc and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15mm thick screed bedding of cement mortar 1:4 complete all as specified & as directed.
M&L for 20mm thick black granite (of any type) machine cut, on vertical surfaces such as skirting, dado, etc., laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering of cement mortar 1:4 complete all as specified & as directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts, and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on top of floor or the side of waist slab with suitable arrangements, and fixed as per standard engineering practice and manufacturer’s recommendation, complete all as specified and as directed.
M&L for 12mm thick Perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with screws on snap grid complete all as specified & as directed.
M&L for 2nd class hardwood sectional area exc 15 sqcm and not exc 25 sqcm clean sawn battens at 30 cm centres with & including applying two coats of superior quality colourless anti-termite chemical solution, fixed in repairs, complete all as specified and as directed.
Taking down chowkat or frame with shutters (including fittings & fixtures) area not exc 1.5 Sqm each (without taking off the shutters from the frame) and making good disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified and as directed.
Taking down chowkat or frame with shutters (including fittings & fixtures) area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) and making good disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified and as directed.
S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, including making good the disturbed surfaces of wall etc in CM 1:4, complete as specified & as directed.
S&F factory made 40mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, chemically treated, complete all as specified & as directed.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet prelaminated on single side and plain or other side, reinforced with M.S. Square tube including painting of edges to match with prelaminated sheet, supplying & fixing in opening as per specification stipulated in SSR Part-II (2020) complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, as per specifications and drawing given in SSR Part-II, complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.
S&F aluminium door shutters, powder coated of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and as specified.
S&F tinted sheet glass 5.5mm thick ordinary quality and glazing with glazing clips in squares exceeding 0.50 sqm in each pane including 25 micron solar control flim complete all as specified & as directed.
Supply and fixing mild steel mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified & as directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed, complete all as specified and as directed.
S&F in repairs floor door closer aluminium body hydraulically regulated complete all as specified and as directed.
M&L for plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.
M&L for 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, fixed with screws to timber framework, complete all as specified and as directed.
M&L for 18/19mm wide & 6mm thick Teak wood lipping / beading / edging fixed with nails to wooden board complete all as specified & as directed.
S&F in repair continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open), ISI marked, fixed with CP steel screws complete all as specified and as directed.
S&F in repairs drawer handle (stainless steel) flush drop (65 to 75mm grip) fixed with nut, screw and washer of mild steel, bright finished, complete all as specified & directed.
Taking down old rusted & damaged steel windows/ventilators of any description and of any type & size with guard bars / grill / glass / iron mongery including cutting holes for lugs / hold fasts and making good disturbed portion in cement mortar 1:4 and/or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required complete all as specified & as directed.
S&F factory made window, made out of MS hollow section of 79mm x 39mm x 1.6mm thick frame with double shutter (glazed and wire gauze shutter, locking arrangement as per sample approved by GE provided with knob section handles 100 mm size and 150 mm long hook and eye welded to frame and shutter, four numbers legs welded to frame including necessary flat iron beading for securing wire gauge and 08 Nos tower bolts 150 mm length and gaurd bar used only 12 mm square (gaurd bar measured and paid seperately under another item) complete all as specified & as directed.
S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed.
S&F in repair 150mm size extruded aluminium alloy handle, fabricated type, anodised, ISI marked, complete all as specified and as directed.
S&F in repair butt hinges of size 100mm medium weight, cold rolled mild steel (ISI marked) fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.
S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm, fixed in floor, complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs, complete all as specified & as directed.
S&F in repair 125mm size long mild steel, steel window handle including nuts & bolts, complete all as specified and as directed.
S&F in repairs powder coated mild steel drapery rod of 25 mm inner dia & 1.6mm wall thickness (in lengths as directed) of approved colour/finish with & including sockets & decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, complete all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of ceilings /soffits of chajjas including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coats of white wash complete all as specified & as directed.
M&L for preparation of old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint complete all as specified & as directed.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of Exterior emulsion paint (Brand ‘ACE’ of make ‘Asian’ / Brand ‘Shingar’ of make ‘Berger’ or equivalent product of makes mentioned in Appendix ‘B’ here-in-after) of approved shade/tint over a coat of suitable priming paint on walls/fascia/chajja including filling of cracks with wall care putty complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified & as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified & as directed.
S&F 12mm thick toughened glass door (two shutters) fixed in position with & including all necessary accessories such as superior quality heavy duty floor spring, SS top hinge including pivot clamps, 300 to 400mm size stainless steel decorative handles, side locking arrangement, etc as per high quality trade practice complete all as specified & as directed.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified & as directed.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed.
S&F in repairs vitreous china Urinal, half stall type of size 355mm x 340mm x 535mm (minimum) (back or corner wall type), white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60mm long brass screws, pointing around urinal back in cement, with & including flush pipe, grating and union for discharge pipe, complete all as specified and as directed. Make : Cera Cat Part No. S4020112, Jaquar Cat Part No. URS-WHT-13261 or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F Auto Closing concealed Urinal Flush Valve with wall flange Flush Valve concealed Push Type single flow (Chromium plated brass/cast cooper alloy suitable for 15mm bore pipe, complete all as specified and as directed. Make : Jaquar, Cat Part No. PRS-CHR-073 or equivalent in makes mentioned in Appendix 'B' here-in-after.
M&L for 12mm thick frosted toughned glass as in urinal partition and similar work including cutting to shape, rounding edges, drilling holes as required complete all as specified and as directed.
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, white, size 580 x 440mm with integral foot rests, with CI ‘P’ or ‘S’ trap, front or back inlet (excluding flushing cistern and flush pipe) but including connection to trap and flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with builtin 'P' or 'S' Trap (as directed), (excluding flushing cistern and flush pipe) with plastic water closed seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.
S&F in repairs 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, coloured, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe of polyethylene of low or high density or PVC, connected to water closet, complete all as specified & as directed. Note : The long bend flush pipe shall be provided in case of ‘Orissa’ pattern pan and quoted rate shall deemed to include this aspect.
S&F in repairs vitreous china wash down wall mounted water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with builtin 'P' or 'S' Trap (as directed), (excluding flushing cistern and flush pipe) with plastic water closed seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed. Make : Cera, Cat Part No. S1043128 P Trap or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F twin flush concealed flusing cistern, low level, size 500x90x460mm, fixed in wall including connection to pipe complete all as specified & as directed. Make : Cera, Cat Part No. B1110101 or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and as directed. Make : Cera, Cat Part No. F5001103 or equivalent in makes mentioned in Appendix 'B' here-in-after.
Dismantling carefully and taking up or down existing unserviceable /serviceable steel water tubing and connections of 15mm bore complete all as specified and as directed.
Dismantling carefully and taking up or down existing unserviceable / serviceable steel water tubing and connections of 20mm bore complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade (ISI marked) of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade (ISI marked) of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
S&F in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed.
S&F in repair Jet spray chromium plated brass for EWC with & including PVC connection 600mm long suitable for 15mm bore GI pipe with PTMT nuts & nipple complete as specified and as directed.
S&F in repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete as specified and as directed.
S&F in repairs 15 mm bore bib tap, brass, chromium plated, long body, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, including CP brass wall flange, complete all as specified & as directed. Make : Cat Part No. ‘G4906A1’ of ‘Parryware’ / Cat Part No. ‘F2002152’ of ‘Cera’ / Cat Part No. ‘CON-107KN’ of ‘Jaquar’ / Cat Part No. ‘9208’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.
S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, complete all as specified & as directed. Make : Cat Part No. ‘G4902A1’ of ‘Parryware’ / Cat Part No. ‘F2002101’ of ‘Cera’ / Cat Part No. ‘CQT-23011B’ of ‘Jaquar’ / Cat Part No. ‘9202’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.
S&F in repairs Shower rose, square type, brass, chromium plated, 125mm dia, with swivel joint, fixing to pipe of 15mm bore or union complete all as specified and as directed.
S&F in repairs 15mm bore Angle stop valve, brass, chromium plated, fancy type, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for union, including CP brass wall flange, complete all as specified & as directed. Make : Cat Part No. ‘G4907A1’ of ‘Parryware’ / Cat Part No. ‘F2002201’ of ‘Cera’ / Cat Part No. 'CON-059KN’ of ‘Jaquar’ / Cat Part No. ‘9210’ of ‘Prayag’ or equivalent in makes mentioned in Appendix ‘B’ here-in-after.
S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified & as directed.
S&F in repairs 20mm bore Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified & as directed.
S&F in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and as directed.
S&F PVC flexible waste pipe for fixing with 32/38/40mm bore waste coupling of kitchen sink, wash basin etc complete all as specified & as directed.
S&F PVC connection 450mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified & as directed.
S&F in repairs grating doom CP brass 100mm dia of plated with waste hole complete all as specified & as directed.
S&F in repairs Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, complete all as specified and as directed.
S&F in repairs toilet paper holder, vitreous china, box type, white, fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.
Dismantling of cast iron drain pipe of 100mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.
Dismantling of cast iron drain pipe of 75mm bore, jointed in CM and taking out of trenches or floors, if required, complete all as specified & as directed. Note :- Excavation & earthwork shall be measured and paid separately.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & as directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified & as directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified & as directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified & as directed.
S&F 110mm bore PVC (SWR) bend, any radius, with access door complete all as specified & as directed.
S&F 75mm bore PVC (SWR) bend, any radius, with access door complete all as specified & as directed.
S&F 110mm bore PVC (SWR) junction single (single ‘T’) equal or unequal with access door complete all as specified & as directed.
S&F 75mm bore PVC (SWR) junction single (single ‘T’) equal or unequal with access door complete all as specified & as directed.
S&F PVC (SWR) reducer 110mm to 75mm bore complete all as specified & as directed.
S&F 75mm bore PVC (SWR) vent cowl complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 110mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F stack clamp made out of MS flat 50mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F PVC (SWR) floor trap plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete all as specified & as directed.
M&L for 50mm thick PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate as in flooring, leveling course, etc, surface finished even and smooth without using extra cement complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets as in roof coverings etc including ridges complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss, etc, as in girder, purlin, trusses, wind ties or frame work of false ceiling in any position and in any description complete all as specified and as directed.
S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed.
S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary riveted, bolted or welding etc. conforming to Gde E-250 (Fe 410-W) quality `A’ complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick with coating AZ-150 gsm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed. Note : Colour of sheet shall be as approved by the GE.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified and as directed.
S&F in repair floor mounted coupled closet Bowl-WC of size 360 x 640 x 685mm (minimum) with PP seat cover, chromium plated or aluminised hinging device including P trap of 180mm bore complete all as specified and directed. Make : Jaquar Cat Part No. SLS-WHT-6851S110PP or equivelant in makes mentioned in Appendix 'B' here-in-after.
S&F in repair Counter top oval type wash basin white colour of size 495mm x 395mm x 150mm including 32 mm dia CP brass waste coupling wastage chain with plug and procelain stopper complete all as specified and directed. Make : Jaquar Cat Part No. JDS-WHT-25909 or equivelant in makes mentioned in Appendix 'B' here-in-after.
Supply and fixing in repairs concealed body single lever wall mounted mixer chromium plated brass complete all as specified and directed.
S&F 5mm thick hollow PVC false ceiling decorative type as approved by GE complete all as per approved design, shade & quality fixing at site on & including frame as per manufacturer's instructions complete all as specifie and directed.
M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified and as directed.
M&L for factory made 80mm thick machine pressed precast cement concrete coloured designer polished (reflecting type) interlocking paver blocks of Grade M-40 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment with coloured top casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & as directed. Note : Shape & colour of paver blocks shall be as approved by the GE.
M&L for precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:4, complete, all as directed.
M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for brick work with old size burnt clay sub-class ‘B’ bricks, straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed. Note : Brick work under this item shall be carried out in sewage disposal work (i.e. manholes).
M&L for cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in surface channels and drains and benching complete all as specified and as directed.
Extra for forming fair finished drains & channels 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:4 on brick masonry or other than fair face of brick work surfaces of walls, mixed with integral liquid water proofing compound as per manufacturer's instructions, finished even & smooth without using extra cement, complete all as specified and directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.
Supply only integral liquid water proofing compound (ISI marked) complete all as specified & as directed.
M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. including placing in position and set in CM (1:4) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately under respective item of this Schedule.
Demolition and breaking up drain pipes 100mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar or taking down 110m bore PVC (SWR) pipes, complete all as specified and as directed.
S&F DWCPE (SN8) pipe 200mm dia (inner) (ISI marked) as per IS-16098 (Part-II) laid in trenches or in floor on moorum bed to required shape including necessary accessories / fitting / jointing / ring, jointg and testing complete all as specified and directed.
M&L for dismantling / demolition of brick work / RCC work circular or square upto 0.50 metre height depth of existing defunctional manhole of any size and shape and filling the same with demolished material & further by earth filling duly compacted in manhole upto the existing ground level and making the surface good all around complete all as directed.
M&L for construction of Soak Well for 51 to 100 users complete, all as specified and shown on drawings. Drg No. GE(A) SOG/COMP/17/2016, Sheet No. 1/1
Taking down carefully existing unserviceable/perished surface conduit/ concealed conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, top sheet covers, fan regulators, wooden boxes, MS sunken boxes, etc and making good the disturbed surfaces of wall, floors, ceiling, etc to match with the adjoining surfaces, complete all as specified and as directed.
M&L for Modular point wiring for one light /fan /bell /buzzer point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 1.50 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour to common earth and connected to earth dolly laid/ drawn into and including non-metallic rigid PVC concealed conduit (medium duty, ISI marked, not less than 20mm dia) with all fittings such as tee, bends, etc all as per IS, terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular switches, sockets, regulators etc with and including modular cover plates with frame of requisite module, complete all as specified and as directed. Notes : (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed to include for modular metal flush boxes of requisite module and modular cover plates with frame of requisite module of colour as approved by GE.
All as per serial item No. 140.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches complete all as specified and directed.
All as per serial item No. 140.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board complete all as specified and directed.
All as per serial item No. 140.00 here-in-before but for one light point controlled by two, two way switches complete all as specified and directed.
All as per serial item No. 140.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 4 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour.
All as per serial item No. 140.00 here-in-before but three light point controlled by one 15/16 Amps switch with 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour. Note : Three light points controlled by one switch shall be considered as ‘One Point’ unit for measurement and payment purpose.
S&F Modular switch 1 way 6A, 1 module, complete all as specified and as directed.
S&F Modular switch 2 way 6A, 1 module, complete all as specified and as directed.
S&F Modular Bell push 6A, 1 module, complete all as specified and as directed.
S&F Modular switch, 1 way 16 Amp, 1 module, complete all as specified and as directed.
S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and as directed.
S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed.
S&F ceiling rose, PVC/Polycarbonate insulated body, 65mmx50mm with three terminals, ISI marked, complete all as specified and as directed.
S&F lamp holder, PVC/Polycarbonate insulated body with back plate suitable for conduit/casing caping fittings, ISI marked, complete all as specified and as directed.
S&F Modular Fan step regulator, 120W - 2 module, complete all as specified and as directed.
Supply and fixing Bell ‘Ding Dong’ / ‘Multi Music’ Type, AC, 230 Volts, ISI marked, complete all as specified and as directed.
M&L for taking down carefully existing serviceable bracket Fan, Ceiling Fan, etc of any shape and size and depositing to MES store yard and refixing after repair work to the building under other items of this BOQ including proper cleaning and connecting up with and including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto ceiling rose,complete all as specified and directed. Note : Contractor shall be responsible for making good the fans if damaged during taking down, transportation, refixing, etc by his workmen to the entire satisfaction of GE.
S&F Recess mounting LED 2x2 feet luminaire, 36 watt, Correlated Colour Temperature (CCT) shall be minimum 6000 degree kelvin with drive, connector block etc. complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting & connecting and testing complete all as specified and as directed. Make :- Crompton Cat Part No LCTLSNE-46-FO-CD / Philips Cat part No RC383B LED 46S-6500 PSU OD WH PIR / Syska Cat part No SSK-TVP-6060-46W / Havells Cat part No VENUSNEOHE2X2PLR36WLED865 or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F in replacement (including taking down old light fitting any type) LED batten fitting including T-8 Retro LED 1x20 Watt, 6000K, 4 feet complete with decorative ultra ceiling square profile linear LED lighting fixture with extruded polycarbonate environment friendly cover complete with connection with 2 core flexible copper cable 23/0.00076 from ceiling rose to fitting connection with following specifications, complete all as specified and as directed :- (a) Lumen efficacy of system should be minimum 105 Lumen per watt. (b) Voltage operating range : 160 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max 10%. (f) IP rating : IP-20. (g) CRCA pre coated housing with two coloured plastic end caps. (h) LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection device for 2.5 KV. (l) CRI : Minimum 80 Make: Model “LDL-20-WW” of M/S Crompton or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F in replacement Four Star Rated LED lamp 12W LED B-22 base with following specifications, complete all as specified and as directed :- (a) Lumen efficacy of system should be minimum 105 Lumen per watt. (b) Voltage operating range : 160 to 270 Volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.90 (e) CRI : Min 80 Make: Model “LED 12W-B22-WW” of M/S Crompton or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F in replacement LED mini mirror fitting of minimum and including lamp of 1x10 Watt, 6000K, 2 feet complete with decorative ultra ceiling square profile linear LED lighting fixture with extruded polycarbonate environment friendly cover including connection with 2 core flexible copper cable 23/0.00076 from ceiling rose to fitting connection with following specification, complete all as specified and as directed :- (a) Lumen efficacy of system should be minimum 105 Lumen per watt. (b) Voltage operating range : 160 to 270 Volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max 10%. (f) IP rating : IP-20. (g) CRCA pre coated housing. (h) LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection device for 2.5 KV. (l) CRI : Minimum 80 Make: Model “LDL-10-WW” of M/S Crompton or equivalent in makes mentioned in Appendix 'B' here-in-after.
Supply, installation, commissioning & testing Light Emitting Diode (LED) based street/ security light fitting, 45 Watt with & including LED lamp, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness, monolithic construction, totally enclosed, dust and water proof, minimum system efficiency of more than 100 lumens per watt and a minimum system lumen output of not less than 4500 lumens, correlated colour temperature shall be minimum 5700 degree Kelvin, Colour Rendering Index (CRI) shall not be less than 70, fitting shall be designed for a system life of 50,000 hours @ 70% lumen maintenance, ingress protection of IP-65 (minimum), mechanical impact resistance rating of IK ≥ 07, operating voltage range 140 V to 270 V, AC, frequency 50-60Hz, potted type for humming free operation, driver shall withstand upto 400 V for 08 hours, surge protection not less than 10 KV, Power factor > 0.95, Total Harmonic Distortion (THD) shall be less than 15%, double phase protection, no load, open circuit and short circuit protection, suitable for ambient temperature from (-)10°C to 50°C and humidity level 10% to 90% RH, cool white colour and lamp starting time shall not be more than 10 second, PMMA /polycarbonate /toughened glass heat resistant cover, prewired and connecting up to street light feeder/junction box with & including 2.5 Sqmm 3 core PVC insulated, weather proof, multi stranded copper conductor cable of 1100 Volt grade (ISI marked), fixed in repairs, complete all as specified and as directed.
Supply, installation, commissioning & testing Light Emitting Diode (LED) based Flood light fitting, 150 Watt with & including LED lamp, housing made up of LM6 pressure epoxy powder coated die cast aluminium alloy with effective thermal management, sturdiness, monolithic construction, totally enclosed, dust and water proof, minimum system efficiency of more than 100 lumens per watt, a minimum system lumen output of not less than 16500 lumens, Correlated Colour Temperature (CCT) shall be minimum 5700 degree Kelvin, Colour Rendering Index (CRI) shall not be less than 70, fitting shall be designed for a system life of 50,000 hours @ 70% lumen maintenance, ingress protection of IP-66 (minimum), mechanical impact resistance rating of IK ≥ 07, operating voltage range 140 V to 270 V, AC, frequency 50-60Hz, surge protection not less than 10 KV, Power factor > 0.95, Total Harmonic Distortion (THD) shall be less than 10%, double phase protection, no load, open circuit and short circuit protection, suitable for ambient temperature from (-)10°C to 50°C and humidity level 10% to 90% RH, cool white colour and lamp starting time shall not be more than 10 second, PMMA/ polycarbonate/ toughened glass heat resistant cover, prewired and connecting up to street light feeder/junction box with & including 2.5 Sqmm 3 core PVC insulated, weather proof, multistranded copper conductor cable of 1100 Volt grade (ISI marked), fixed in repairs, complete all as specified and as directed.
Supply and fixing in replacement Ceiling Mounted mounting Round LED light fitting 18 Watt, with opal type polycarbonate diffuser including all accessories like connectors, Driver complete with connection with 2 core flexible copper cable 23/0.00076 from ceiling rose to light fitting etc including removing of old existing light fitting any type complete all as specified and directed and with following specifications:- (a) Size = 225 mm dia (b) Lumen system efficiency of luminaire should be minimum 100 Lumens /Watt. (c) Input Voltage range : 140 to 270 Volts. (d) Temp operating range : Minus 10 degree C to Plus 45 degree C. (e) Power Factor : Minimum 0.95. (f) THD : Maximum 10%. (g) CRI : Morethan 80 and CCT : 6500K. (h) IP rating : Minimum IP20. (j) IK rating : Minimum IK07. (k) Built in potted LED Driver of the make as of the luminaire. (l) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) (m) Surge protection minimum 2.5kV. (n) Housing : DIE CAST ALUMINIUM. (o) LED driver should be complete with all protection viz opem/short circuit protection, over voltage protection, all as per standard design of manufacturer, complete all as specified and as directed.
Supply, installation, commissioning & testing Light Emitting Diode (LED) based Focus Light Out door type mounted light fitting, 150 Watt with & including LED lamp, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness, monolithic construction, totally enclosed, dust and water proof, minimum system efficiency of more than 100 lumens per watt and a minimum system lumen output of not less than 15000 lumens, correlated colour temperature shall be minimum 5700 degree Kelvin, Colour Rendering Index (CRI) shall not be less than 70, fitting shall be designed for a system life of 50,000 hours @ 70% lumen maintenance, ingress protection of IP-66 (minimum), mechanical impact resistance rating of IK ≥ 07, operating voltage range 140 V to 270 V, AC, frequency 50-60Hz, potted type for humming free operation, driver shall withstand upto 400 V for 08 hours, surge protection not less than 10 KV, Power factor > 0.95, Total Harmonic Distortion (THD) shall be less than 15%, double phase protection, no load, open circuit and short circuit protection, suitable for ambient temperature from (-)10°C to 50°C and humidity level 10% to 90% RH, cool white colour and lamp starting time shall not be more than 10 second, PMMA/ polycarbonate/toughened glass heat resistant cover, prewired and connecting up to street light feeder/junction box with & including 2.5 Sqmm 3 core PVC insulated, weather proof, multistranded copper conductor cable of 1100 Volt grade (ISI marked), including PCC work and angle iron of required size, clamps, screws, nuts and bolts to fixing the fitting, making holes, fixed in repairs, complete all as specified and as directed.
NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.
Supply and fixing mounting bracket (suitable for fixing/holding street/security light fittings) made of 40mm bore GI pipe ‘light grade’ not less than 1.50m long, bent to shape at required angle, fixed to Pole/wall with & including mild steel clamps (02 Nos) made out of flat iron 50x6mm with nuts, bolts & washers, matching with section of Pole/suitable for wall, fixed in repairs, complete all as specified and as directed.
Disconnecting & taking down carefully existing exhaust fan of any type & any size and depositing the same at Store yard of AGE E/M (A) Suratgarh. Note : Contractor shall be responsible for making good the fans if damaged during taking down, transportation, etc by his workmen to the entire satisfaction of GE.
Supply and fixing Exhaust Fan made of sturdy Engineering plastic complete with louvers shutter, 250mm sweep, 230V, 50 Hz, 1200 RPM, Copper winding and connecting with & including 1 Sqmm, three core, flexible multistranded copper conductor cable and connected from ceiling rose to fan complete all as specified & as directed.
Supply & fixing Exhaust fan of 600mm sweep made of steel body, heavy duty, double ball bearing, copper wound, steel body, 2200 RPM, Single Phase 230 Volt, 50 Hz AC supply complete with blades, frame and louver shutter and connecting up with & including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2 mm drawn into & including flexible PVC conduit and fixed by using 4 Nos, 100mm long 8mm dia bolt nuts and washers and grouted in wall in CM (1:3) complete all as specified & as directed.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 230 Volt, 10 kA, ‘C’ Curve, ISI marked, fixed in repairs, complete all as specified and as directed.
S&F in replacement heavy duty TPN Copper bus bar chamber 200 Amps, 4 Way fixed with hinges and locking arrangements, wall mounting type and arrangements for 4 Nos incoming /outgoing connections in each bus bar fixed on wall complete all as specified & directed. Make : Havells Cat Part No IHBC0010004 or equivalent in Legrand/ L&T/ ABB/ SCHNEIDER/ SIEMENS.
S&F flush mounting factory made VTPN DB 4 way, 415 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with 02 neutral bar, 02 earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed. Make :- Legrand Cat Part No DPX³ 5077 50 or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F sheet metal enclosure, double door type, suitable for fixing MCBs, SPN with 200 Amps rated copper bus bar, 12 way, 240 Volts, flushed in wall, fixed in repairs, complete all as specified and as directed. Note : Cost of cutting/leaving forming chases for sinking for DB and making good in CM 1:4 shall deemed to be included in quoted rate of this item.
S&F sheet metal enclosure, double door type, suitable for fixing MCBs, SPN with 200 Amps rated copper bus bar, 8 way, 240 Volts, flushed in wall, fixed in repairs, complete all as specified and as directed. Note : Cost of cutting/leaving forming chases for sinking for DB and making good in CM 1:4 shall deemed to be included in quoted rate of this item.
S&F MCCB 4 Pole 100 Amps, thermal magnetic release having, breaking capacity 25 KA, 415 Volt in the existing feeder pillar box including any addition / alteration to the panel to accommodate the new MCCB & making connections with 25x3 mm copper strip as required from main bus bars, making necessary welding work, metal work for fixing base plate etc and connections, fixed in repairs, complete all as specified and as directed. Make : Legrand Cat Part No. DPX³ 160 4200 55 or equivalent in makes mentioned in Appendix 'B' here-in-after.
S&F MCB, 100 Amps, SPN, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, ISI marked, fixed in repairs, complete all as specified and as directed.
S&F MCB, 63 Amps, SPN, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, ISI marked, fixed in repairs, complete all as specified and as directed.
S&F MCB, 40 Amps, SPN, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, ISI marked, fixed in repairs, complete all as specified and as directed.
S&F MCB, 6 to 32 Amps, Single Pole, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, ISI marked, fixed in repairs, complete all as specified and as directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 7.50 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40 mm thick RCC pit cover, etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.
M&L for sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, sheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring of any size / type complete all as specified & as directed. Notes :- (i) 02 runs of 6 sqmm size main cable, 01 run of 6 sqmm size earth continuity conductor cable & conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall deemed to be included in quoted rate of this item.
M&L for sub main wiring with two runs of 4 sqmm (nominal area) size main cable & one run of 4 sqmm size earth continuity conductor, single core, PVC insulated, sheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring of any size / type complete all as specified & as directed. Notes :- (i) 02 runs of 4 sqmm size main cable, 01 run of 4 sqmm size earth continuity conductor cable & conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall deemed to be included in quoted rate of this item.
S&F 2 Core Copper flexible FRLS cable 2.5 Sqmm alongwith PVC rigid conduit laid in PCC floor/wall/piller, clamps etc as required at site to connect foot path light including cutting chases, PCC work/tile work to match the area as before and making good including taking down old unserviceable cable, complete all as specified and directed.
Supply, Install, Commissioning & testing LT Panel board, indoor type floor mounted, factory fabricated, 415 Volt, 3 Phase & neutral, 4 wire, 50 Hz, AC supply system, protection class IP-53, dust & vermin proof, made out of CRCA sheet 2mm thick, powder coated inside & outside of flint grey shade (RAL-7032), back doors detachable type fixed with nuts, bolts and front door shutter with hinges and knobs fixed on PCC 1:2:4 Type B-1 of suitable size and width not less than 30 cm including internal wiring with PVC insulated stranded copper conductor FRLS cables of appropriate size but not less than 4 sqmm with proper ferrule & cable glands, including danger notice plate, comprising & including the following accessories complete all as specified and as directed including disconnecting, dismantling & taking down old unserviceable LT Panel box of any size & capacity :- INCOMING (a) Aluminum bus bar fixed on insulators of capacity 600 Amps for three phase 4 wire AC supply - 01 Set (Set of Four) (b) MCCB 400 Amps, 36 kA, 4 Pole, Thermal Magnetic Release type- 01 No (Description of serial item No. 183.00 contd…)
M&L for Earthing to Transformer / GOD switch / equipments / panels etc with & including galvanised mild steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the earth plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to & including galvanized mild steel strip 32x6 mm as earth lead, including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted/welded to earth plate at one end and other end of strip connected to transformer / GOD / Panel / equipment body / test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 7.5 metre above ground level fixed with and including 25x3mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from earth pit to top of electrode and including funnel, wire mesh, copper lugs etc complete with earth pit in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and 40mm thick RCC (1:2:4 type B1) cover complete all as specified and shown in electrical plate No 3 of SSR Part-I including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exc 50m complete all as specified and as directed including dismantling & taking out old existing unserviceable earthing. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.
Supply, laying, jointing and testing LT XLPE insulated screened, bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 120 sqmm 3.5 core (ISI marked) laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable of any size complete all as specified and as directed. Note :- (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
All as per serial item No. 185.00 here-in-before but for cross sectional area 70 sqmm x 3.5 core complete all as specified and directed.
All as per serial item No. 185.00 here-in-before but for cross sectional area 35 sqmm x 3.5 core complete all as specified and directed.
All as per serial item No. 185.00 here-in-before but for cross sectional area 10 sqmm x 2 core complete all as specified and directed.
M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. Notes :- (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.
M&L for sub class ‘B’ (old size) burnt clay bricks laid flat and dry abutting each other with gap between adjacent bricks not exc. 10mm for protection of underground electric cable in such a way that the length of brick is at right angle to the central axis of cable complete all as specified and as directed.
M&L for Galvanized iron tubing, 50mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete including taking down old unserviceable pipe of any size with clamps complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.
M&L for Galvanized iron tubing, 80mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete including taking down old unserviceable pipe of any size with clamps complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.
M&L for UPVC pipes (SCH-40), 50mm bore ISI marked, including all fittings and laid in trenches / under road/ drains, fixed to poles / walls with required size of flat iron (25mm x 3mm) clamps, bolts, nuts and washers for protection of electric cable and discharge of water complete including taking down old unserviceable pipe of any size with clamps complete all as specified and directed. Note :- Excavation & earthwork shall be measured & paid for separately.
S&F off load changeover switch in sheet metal enclosure, heavy duty, 100 Amps, four pole, 415 Volts AC, 50 Hz with side handle including connections and taking down of old changeover of any shape and size complete all as specified and directed.
Supply and fixing in replacement LED Post top light fitting 40 watt, decorative design, Glare-free and better uniformity, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system or as directed by Engineer-in-charge including making electric connections, complete all as specified and as directed by Engineer-in-charge and as per the following specifications:- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) CRI : Morethan 80 and CCT : 5700 K. (g) IP rating : IP65. (h) IK rating : Minimum IK07 (j) Pressure die cast aluminium alloy housing and front cover clear toughned glass (k) Built in potted LED Driver of the make as of the luminaire. (l) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (m) Surge protection 10 kV (inbuilt + extended) (n) Lens - High Efficiency wide angle lens. (o) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily)
PACHAR BROTHERS
M/S Shree Ram Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .