PERIODICAL SERVICES AND MISC B/R REPAIR IN ENGR REGT, TA, ZRO, PRO AND OTHER UNITS UNDER AGE B/R-II OF GE JAIPUR

Amount

M & L for preparation of old decorated surfaces of walls, pillars and cornices including brooming down and cleaning the surface and applying two coat of white wash all as specified and directed.

M & L for preparation of old plastered or unplastered decorated surfaces and applying two coat of white wash on ceiling.

S&F complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion,white or tinted complete all as specified and as directed by Engineer-in-Charge.

S&F Complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls complete all as specified.

M&L for Complete removal of existing treatment and M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work, preparation of existing surface with wall care putty on plastered surface and applying two coat of weather proof exterior emulsion paint (weather coat smooth) using hand roller over and including one coat of primer on walls complete all as specified and as directed by Engineer-in-Charge.

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.

S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15mm complete all as specified and directed by Engineer-in-charge.

M&L water proofing treatment to roof surface by applying with a coat of cold aplied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing including a coat aluminuium paint over APP membrane as per manufacturer instructions.

Taking down existing roof treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge.

M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and smooth without using extra cement etc. complete all as specified and directed

Dismantling false ceiling board or insulation board etc, any thickness including snap grid frame etc complete all as specified.

S&F in repair anodized aluminium snap grid frame work of size 605 x 605 mm for false ceiling including and providing 12 mm thick medium density Fibre boards exterior grade fixed with timber,framed work with screw as per specification alll as specified and directed by Engineer-in-Charge.

Less Schedule of Credit

ANKIT BUILDERS (BID ID -3148573)

M/S JALANDRA CONSTRUCTIONS (BID ID -3140959)

M/S MAYANK ASSOCIATE (BID ID -3141697)

J.J.ENGINEERING (BID ID -3142094)

NAGHAR ENTERPRISES (BID ID -3142354)