REPAIR/MAINT TO ALUMINIUM DOORS WINDOWS, UPVC DOORS WINDOWS, TOUGHNED GLASS DOORS, ALUMINIUM PARTITITONS, STEEL WORK, AND ROOF TREATMENT WITH HIGH PERFORMANCE LIQUIED MEMBRANE TO OPERATION THEATRE AND REPAIR/MAINT OF CONDUCTIVE FLOORING, APPLYING AN

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast complete all as spacified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as spacified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as spacified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as spacified and directed.

M&L TMT 8mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming Fe- 500 complete all as spacified and directed.

M & L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, chajja, facia and the like including weathering, slightly rounded or chamfered angles, levelling course and filling over roof with & incl necessary use and waste of form work for fair faces of complete all as spacified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, capacity of tank 500 ltrs and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, Capacity of tank 1000 ltrs and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, Capacity of tank 2000 ltrs and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)20 mm nominal bore complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres including dismantling of unserviceable existing water tanks of capacity 500 ltrs and taken as credit complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 1000 litres including dismantling of unserviceable existing water tanks of capacity 1000 ltrs and taken as credit complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 2000 litres including dismantling of unserviceable existing water tanks of capacity 2000 ltrs and taken as credit complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210gms) complete all as specified and directed.

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 0.5 to 1.5M from below GL)

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed. (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 1.50M to 4.50M from below GL)

Temporarily blocking of sewage line with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed by EIC, and taking out the blocking arrangements of inlet and making the system functional all as specified and directed for 150 mm bore size of pipe lines complete all as specified and directed.

All as above item No: 22 above but 200 mm bore

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 200 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 150 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 200 mm bore dia incl packing under & completely surounding pipes with conrete after they are laid and tested complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to SGSW pipes of 150 mm bore dia incl packing under & completely surounding pipes with conrete after they are laid and tested complete all as specified and directed.

M&L Salt-glazed stone ware drain (SGSW) pipe grade 'A' 150 mm bore dia laid in trenches & jointed in CM 1:1 including dismantling of existing unserviceable pipes complete all as specified and directed

M&L Salt-glazed stone ware drain (SGSW) pipe grade 'A' 200 mm bore dia laid in trenches & jointed in CM 1:1 including dismantling of existing unserviceable pipes complete all as specified and directed

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including dismantling and removal of existing paver blocks complete all as specified and directed.

M&L for exterior grade outdoor coloured floor tiles (heavy duty) of tactileseries of size 300x300x10mm of Make Johnson endura or equivalent make bedded over and including 20mm thick screed bed in CM 1:6 and jointed in cement mortar to match the colour of floor complete all as specified and directed including dismantling of existing tiles complete all as specified and directed.

M&L Chequered cement concrete coloured tiles 30 cmx30cmx20 mm thick with coloured cement and pigment , set, jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:4 as in floors complete all as specified and directed.( (Note : Screed bed will not be measured and paid separately) including dismantling of existing tiles

M & L for 75mm thick plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63mm, of broken bricks, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Removing of soil excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

S&F in repair Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified and directed.

S&F Gun metal, in repair globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified and directed.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in CM 1:4 finished fair & even without extra cement, cement mortar mixed with WPC @ 3% of weight of cement complete all as specified and directed. Note: WPC measured & paid for separately

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even complete all as specified and directed.

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of any tint/shade over a coat of primer complete all as specified and directed.

M&L applying two coats of Apex ( Asian Paint) / Weather coat (Berger) over newly plastered surface including preparation of wall surface over and including 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L fpr preparation of new steel and iron based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade complete all as specified and directed.

All as per above item No 54 above but on ceiling.

M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a coat of Birla or JK white wall putty average thickness 2mm on old plastered surfaces including prepration complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (Note- (i) Primer and emmulsion to be carried out through air less spray machine ( Mechanical means) (ii) Rate included for necessary scaffolding and arrangments for working upto 15m height and working on any type of roof like AC sheet, Galvalume sheet with necessary safety measures and labour wastage due to working restrictions in hospital areas)

Supply only integral water proofing compound powder ISI marked

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 20mm thick in cement mortor 1:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Grade Fe- 290 (Gde E- 165) complete all as specified and directed.

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F in repairs Chromium plated fancy Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Bib taps with cup , cast iron with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Chromium plated elbow operated fancy long body Bib taps with cup , cast copper alloy, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe) complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repairs PTMT( Polytetra Methyllene Terephthalate )Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified and directed.

S&F in repairs swan neck Pillar taps, fancy type cast copper alloy , chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repairs elbow operated Pillar taps, fancy type cast copper alloy , chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repairs CP Angle stop cock( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repairs CP Bib tap with stop cock( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S & F for Health faucet, chromium plated rising spray with wall brackets with 1.5m long metallic flexible tube, with 15 mm dia complete all as specified and directed.

S & F for Jet spray, chromium plated rising spray with 1.5m long flexible tube, with 15 mm dia complete all as specified and as directed.

S & F in repair for chromium plated paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs for 15mm bore pipe Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs for 15mm bore pipe Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia for NT/ FT complete all as specified and directed.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan ( padestal pattern Water Closet ) , including fixing bolts, flushing cistern and flush pipe , including connection to drain ( or outgoing pipe) and to flushing pipe , etc, including make good the floor as existing complete all as specified and directed.

S&F in repairs VC WHITE Squatting pan ,'Orissa' pattern size 580x440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphon including make good the floor as existing complete all as specified and directed.

S&F in repairs Low level flushing cistern, moulded from virgin poly propylene complete all as specified and directed.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs PTMT connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm White (minimum), with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) , fixed in repairs including connections to flushing pipe and outgoing complete all as specified and directed.

S&F Vitreous China urinal flat back, half stall (Large size) with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe , fixed in repairs including connections to flushing pipe and outgoing complete all as specified and directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting complete all as specified and directed.

S&F 32mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified and directed.

M&L in repairs 32 mm waste fittings , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 32 mm bore flexible pipe of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling complete all as specified and directed.

S & F Neosprene rubber beading including taking down old rubber beading as in aluminium window and door shutter complete all as specified and directed.

S&f for 12 mm thick toughned glass odinary qulity and glazing with neosprene beading, SS clip or cleats of any size any postition including taking down of existing unserviceable glass complete all as specified and directed.

Repairing of existing aluminium door single/double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,door stopper,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 3-5 mm glass and making t he door and shutter serviceable complete all as specified and directed. (Note:-Floor door springs and door closer where changed shall be measured and paid separately under appropriate items

Dismantling fencing wire,any type complete all as specified and directed.

Mild steel screw bolts (machine made) of 10 mm dia of sank withhexagonal or squre head at one end & screw the other or screwed both end (as directed)each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing of any shape and size as directed.

S & F in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including dismantling of old wire complete all as specified and directed.

S&F false ceiling of E-board of size 600 x 600 x 4 mm thick, white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with glavanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) including dismantling of old false ceiling complete all as specified and directed.

M&L for seamless ceiling comprising of Gypsum Board 12 mm thick in ceiling fixed with screw or as per manufacturers instructions, with necessary jointing and taping, and applying two coat oil bound distemper over one coat primer fixed over and including Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including finishing the exposed surfaces with two coats of oil bound distemper over 2 mm thick wall care putty and dismantling of existing ceiling complete all as specified & directed.

M&L for False ceiling, with and including GI powder coated frame work and mineral fibre ceiling tiles, suspended with ceiling in and including of dismantlingof ceiling boards (fiber, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets including dismantling of existing ceiling, complete all as specified & directed. Make : Dune Max RH 99 of Arm strong or Everest or any other make as specified in Annexure of Makes.

M & L for Super heavy series PVC Wall panelling consisting of 5-6 mm thick (hollow) Plain / wood colour PVC profile as approved including complete fixing arrangments on wall complete all as per manufactures specifications including dismantling of existing panelling complete all as specified & directed.

Taking down chowkhats or frame (wooden / aluminium / iron / uUPC) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit complete all as specified & directed.

Taking down chowkhats or frames (wooden/aluminium/iron) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified & directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified & directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified & directed.

M&L for treating small articles of steel like MS rungs etc with coal tar black paint icl preparation of surface, area tarred not exc 0.1 sqm complete all as specified & directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified & directed.

S &F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm with stuck inside with complete all as specified & directed.

S&F plain solid, strainght chowkhats & frames of 2nd class HW Hollock wrought, framed rebated on the solid,rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkat & treated with coal tar complete all as specified & directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(a) complete all as specified & directed.

M&L 25mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified & directed.

S&F 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified & directed.

S&F 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified & directed.

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified & directed.

S&F 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified & directed.

S&F 125mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed.

S&F in repair 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified & directed.

S&F in repair 250 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified & directed.

S&F in repair 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified & directed.

S&F in repair 75mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified & directed.

S&F in repair 125mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed.

S & F for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified & directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified & directed.

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane complete all as specified & directed.

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading nexc 0.5 Sqm each pane complete all as specified & directed.

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty / wooden beading nexc 0.5 Sqm each pane complete all as specified & directed.

S&F 4.8 mm thick sheet glass odinary qulity and glazing fixed to aluminium joinery with and including neosprene beading area of each pane exc 0.5 Sqm to 1 sqm complete all as specified & directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed. (Note:- floor spring will be suitable for toughtned glass door upto 1.25 m wide shtters)

S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass complete all as specified & directed.

M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified & directed. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.

M&L for Repairing of existing toughened glass door single leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified & directed. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified & directed.

S&F in repairs Mortise lock vertical type of mild steel 4 levers of size 100 mm with duplicate key complete all as specified & directed.

S&F in repair aluminium partition fabricated with aluminium anodised section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick tinted glass and partly paneled with 9 mm thick pre-laminated particle board exterior grade with both side choice lamination including glazing clip, rubber bead, fixed in position as standerd practice complete all as specified & directed.

S&F in repair aluminium partition fabricated with anodised aluminium section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick tinted glass and partly paneled with 3 mm thick aluminium camposit panel including glazing clip, rubber bead, fixed in position as standerd practice complete all as specified & directed.

S&F door comprising frame fabricated with aluminium tube with wall thickness 2 mm, shutter frame with C type aluminium section 25 mm size of 2 mm wall thickness, door panel of 3 mm thick aluminium composite panel and neoprene rubber beading complete all as specified & directed.

S&F 3 mm thick aluminium composite panel with glazing clip and neoprene rubber beading and fixed to aluminium joinery including taking down of existing unserviceable glass complete all as specified & directed.

S&F in repair Aluminium grill not less than 3.13 Kg per sqm fixed with frame in windows / ventilator complete all as specified & directed.

S&F in repair powder coated aluminium grill not less than 3.13 Kg per sqm fixed with frame in windows/ventilator complete all as specified & directed.

S&F Anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes complete all as specified and directed (thickness of aluminium section min 2mm)

S&F Anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and directed (thickness of aluminium section min 2mm)

S&F aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness, 100mm butt hinges (3 Nos in each panel), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and directed.

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed in CM 1:6 complete all as specified & directed.

M&L for Vitrified ceramic tiles 10 mm thick (square / ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over and including 15 mm thick screeding in CM 1:6 complete all as specified & directed.

S&F in repair 20 mm dia fancy type drapery curtain rod made of mild steel duly PVC sleeved complete all as specified & directed.

S&F in repair Powder coated brackets for fixing curtain rod of any dia and fixed complete all as specified & directed.

S&F Powder coated decorative any shape end cap for fixing with curtain rod of any dia and fixed complete all as specified & directed.

M&L for Coloured Glazed ceramic tiles of size 300 mm x 450 mm x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified & directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium sections ( conforming to IS) door with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , double/single leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws, neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness, 100mm butt hinges (3 Nos in each panel), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and directed.

S&F in repair aluminium partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick tinted glass and partly paneled with 3 mm thick aluminium camposit panel including glazing clip, rubber bead, fixed in position as standerd practice complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 as in foundation and mass concrete using 40 mm graded stone complete all as specified & directed.

Demolition of existing roof treatment of any type

M&L for 15 mm thick screed plaster on RCC slab in CM 1:4 including mixing only water proofing compound complete all as specified & directed.( WPC to be measured and paid separately)

M&L for high performance hybrid polyurea slastomeric waterproofing coating cold applied with spray / brush applied, smartcare ulton liquid membrane at 1.5 Kg / Sqm with an elongation of 600% and tensile strength of 12.6 N / sqmm as per ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C1305, shore a hardness of min 75 as per ASTM D2240. The system includes final base preparation as per site requirement, epoxy primer application and applying smartcare Ultron or approved equivalent in two coats at a coverage of 1 Kg / Sqm etc complete as per manufacturer's specification including cleaning of the surface complete all as specified and as directed with written gurantee of 7 years from date of completion Note: - (i) Work to be carried out through authorised applicators of the manufactures. (ii) Contractor shall submit written gurantee of 07 years from date of completion & submit security deposit @ 2.5% of executed amout.

M&L for application of Anti-Microbial Protection: These product hygiene coatings start the biocidal action as soon as the microorganism land on the surface, and prevents the growth of mould, bacteria and yeasts for at least 5 years. This Hygiene coating are independently tested by leading universities to demonstrate resistance. Note : (Anti-Microbial Protection: Filling of all Joints and cavities and Sanded Flush to provide a joint less finish and then sprayed with a water based liquid plastic aseptic and self sterilizing wall coating system to a d.f.t. of 300 microns with primer. These hygiene coatings should start the biocidal action as soon as the microorganism land on the surface, and prevent the growth of mould, bacteria and yeasts for at least 5 years. including removal of any types of existing treatment on wall / ceiling and preparation of surfaces as required (Note:- The work will be carried out in very restricted permissible condition, quoted rates deemed to included for wastages of labour and material components accordingly)

M&L for application of conductive flooring: 2 mm thick, Conductive flooring with carbon backing total thickness 2.00 mm, total weight 3.000 g/m2 polyurethane reinforced, scratch resistant, fire resistant, chemical resistant, slip resistant, anti fungi & bacterial growth, dimensional stability 0.40%, static electrical charger < 2Kv, impact sound reduction approx +4bd, electrical resistant. Installation : The flooring would be installed on a smooth, clean sub floor which should be free from any undulation. A copper strip / mesh should be layer under the tiles, with one earthing point for every 150 sft of area and good quality water based adhesive for fixing as per as manufacturers recommendation. Thermal Welding : The joints must be welds by the heat fusion process to get a seamless floor. The joints in the flooring should be sealed by using a PVC welding bar of matching color to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. The same application to be done for wall skirting up to max 150 mm and coving to be provided using appropriate material and method including dismantling of existing unserviceable flooring. Make – Gerfloor/ Tarquet , France or equivalent make approved by GE (Note:- The work will be carried out in OT rooms in a peacemeal or very restricted permissible condition, quoted rates deemed to included for wastages of labour and material components accordingly)

Sanjay Traders

M/s Reliable Electromech Systems

M/s Highway Construction

M/s Vatsh Raj and co

M/s Chandra Mohan and Sons

M/S CLASSIC ENTERPRISES