SPECIAL REPAIRS TO INTERNAL ROAD LIVING IN AREA AT PW DIV UNDER GE MAINT INF SCHOOL MHOW

Amount

M&L for Scarifying or picking up gravelled,macadam or bituminous macadam in area not exceeding 400 Sqm, depth exc 50mm but not exceeding 100mm by using power machinery or by hand picking tools carefully without damaging existing road surface complete all as specified and directed.

M&L for premixed bituminous macadam (consolidated thickness 75 mm or less), with using 4% binder content by weight of total mix with paving bitumen of grade VG-30 penetration, mixed by using hot mix plant and laid with mechanical paver, rolled and compacted to required camber and gradient by using vibratory /penumatic/tandem power roller 8 to 10 tonne capacity complete all as specified and directed.

M&L for using paving bitumen binder applying evenly a prime coat/tack coat with bituminous sprayer at the rate of 5 Kg/10 Sqm on complete all as specified and directed .

M&L for preparation of old black top bituminous surface by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with mechanical Air compressor to remove all loose dirt etc. and applying evenly a tack coat with paving bituminous primer using paving bitumen at the rate of 5 Kg/10Sqm on black top surface andapplying bituminous premix Ashphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30, mixed by using hot mix plant and laid with Mechanical paver rolled and compacted to required camber and gradient with vibratory /pneumatic /tandom power roller 8 to 10 tonne capacity complete all as specified and directed.

Note1 : Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.

M&L for bituminous premix Ashphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30, mixed by using hot mix plant and laid with Mechanical paver rolled and compacted to required camber and gradient with vibratory /pneumatic /tandom power roller 8 to 10 tonne capacity complete all as specified and directed. (Note1 : Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.)

M&L for making lines, dashes,arrows,letters etc 15 cm wide on bituminous surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, of thickness 2.50-3.0 mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer's instruction including preparation of surfaces i.e cleaning of surface by removing all dust,dirt,oil grease etc complete all as specified and directed.

S&F in repair Cat Eye as (Road Stud) two way reflective type of aluminium alloy body of size 110mm x 120mm x 24mm and weight of 435 gms in Red, Amber or white in colour fixed with and including all necessary items as per manufacturer's instructions complete all as specified and directed. (Make - SUNEYES/ Dark Eye model No DA 972 / 3M/Alcolite)

S&F super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night. (Make - SUNEYES/ Dark Eye / 3M/Alcolite/solar ) complete all as specified & directed.

S&F in repair road Solar delineator made of 50 mm round MS pipe 80 to 100 cm high above ground level with high four quality LED flashing light of red or yellow in colors with operating time of 3-4 consecutive days (with full charge) complete all as specified and directed as per manufacture"s instructions complete all as specified & directed. . NOTE : 1. Excavation, removal of surplus soil and size of pcc pit is 200mm x 200mm x 200 mm filled with pcc 1 :2:4 type B-1. rate quoted shall be included above. Make - Dark Eye (Model No : DA 112 ) or equivalent of SUNEYES/ 3M/Alcolite/solar

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.

Bharadwaj Builders

SANJAY ENTERPRISES

M/S GARG CONSTRUCTION

Jupiter International Sales