Stage contract for Annual maintenance, repairs and other emergent works of various WSS falling under the jurisdiction of PHE Sub-Division Bandipore for the financial year 2025-2026 Winter Preparedness

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge :- In all kinds of soils

Ordinary rock

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge:- In all kinds of soils

Ordinary rock

Hard Rock (Requiring Blasting )

Hard Rock (Blasting Prohibited)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:- In all kinds of soils

Ordinary rock

Hard Rock (Requiring Blasting )

Hard Rock (Blasting Prohibited)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge:- In all kinds of soils

Ordinary rock

Hard Rock (Requiring Blasting )

Hard Rock (Blasting Prohibited)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):K.D German

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete KD

Popular wood

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 2nd class teak wood beading 62x19 mm

Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 18 mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : kd

Providing PLASTIC PIPE OF FOLLOWING DIAS FOR TANKERS TO USE AS SUPPLY PIPE :- 65mm Dia Pipe

80mm Dia Pipe

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

15 - 40 mm nominal bore

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 100 mm dia pipes

125 mm dia pipes

150 mm dia pipes

200 mm dia pipes

250 mm dia pipes

300 mm dia pipes

350 mm dia pipes

Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactured and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) including cost of salvaged material. a). 80mm to 150mm

b). 200mm to 350mm

Decamping & refixing of main cable at Filtration Plants from LT poles, cutting of main cable by Hexa blades, providing / fixing of bone china insulators, thimbles, cost of PVC tape rolls, fuse wire, engagement of skilled/ non skilled labours, cost of rope, hire charges of long stair etc. complete job

Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

20 mm dia. nominal bore

Providing / fixing of MS double collers, for arresting of leakages by way of welding including taking out of the damaged portion and Dumpying / storing the damaged porition in store including all sorts of carriages Complete job : 80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing / fixing of double collers, G.I / M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling, and taking out of the damaged portion and Dumpying / storing the damaged porition in store etc. including all sorts of carriages & dewatering (length verying from 0.60 to 1 Mtr.) :- 40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

300 mm dia

350 mm dia

Providing and fixing including testing, commissioning & fabricating at site M.S pipe fittings/ Specials incld. M.S flanges made out of specified thickness of M.S sheet including cost of flanges 8/10/12mm thick Nuts, Bolts, washers etc & all sorts of carriages upto site of work, as per requirement at site complete job.

Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. Lighting points

Heating points

Re-threading of damaged pipe ends including carriage from site to workshop and back. 20 mm dia

25 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Replacement / supply of PVC gate valves for bleaching / alum tanks/ Foot valves and PVC pipes of ISI marked standard make 20 mm dia Gate valve

25 mm dia Gate valve

32 mm dia Gate valve

40 mm dia Gate valve

50 mm dia Gate valve

Supply and fixing of pvc pipes of ISI marked standard make 15 mm dia PVC pipe (B-class)

20 mm dia PVC pipe (B-class)

25 mm dia PVC pipe (B-class)

32 mm dia PVC pipe (B-class)

40 mm dia PVC pipe (B-class)

50 mm dia PVC pipe (B-class)

80 mm dia PVC pipe (B-class)

100 mm dia PVC pipe (B-class)

Replacement of old damaged Sluice valve by Providing / fixing of new Gate valves/ DI Sluice valve including cost of nuts, bolts, rubber insulations etc. of ISI marked standard make all carriages upto site of works, complete . and providing of check certificate from the standard manufacturer 100 mm dia Gate valve

80 mm dia Gate valve

65 mm dia Gate valve

50 mm dia Gate valve

40 mm dia Gate valve

25 mm dia Gate valve

20 mm dia Gate valve

300 mm dia Sluice valve

250 mm dia Sluice valve

200 mm dia Sluice valve

150 mm dia Sluice valve

100 mm dia Sluice valve

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 50 mm dia Sluice valve Class II

65 mm dia Sluice valve

80 mm dia. Class II

100 mm dia. Class II

125 mm dia. Class II

150 mm dia. Class II

200 mm dia. Class II

250 mm dia. Class II

300 mm dia. Class II

Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work including dismantling of old (in case of replacement) and carriage of same to divisional store, Complete job 300 mm dia

250 mm dia

200 mm dia

150 mm dia

100mm dia

80mm dia

50mm dia

Providing and fixing gun metal non-return valve of approved quality (screwed end ) vertical 25mm dia nominal bore

32mm dia nominal bore

40mm dia nominal bore

50mm dia nominal bore

65mm dia nominal bore

80mm dia nominal bore

100mm dia nominal bore

150mm dia nominal bore

200mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 50 mm dia

80 mm dia.

100 mm dia.

Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523 Upto 600 mm dia.

Above 600 mm dia.

Providing and laying/fixing S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes Class K-7 conforming to IS : 8329 100 mm dia

150 mm dia.

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm and 150 mm dia GI pipes

65 mm and 80 mm dia GI pipes

40 mm and 50 mm dia GI pipes

25 mm and 32 mm dia GI pipes

15 mm and 20 mm dia GI pipes

Providing fixing & commissioning of 12 mm thick Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever required 350mm dia.

300mm dia

250mm dia

200mm dia

150mm dia

100mm dia

80mm dia

65mm dia

Restoration of damaged pipes due to frost / frozen including earth works excavation /dismantling /refilling / making good the same complete job in all respects. Upto 20mm to 100mm dia (by using blue lamp including cost of K.oil)

Providing & fixing of HDPE Pipes (PN-6 & above) complete excluding earth work, but including all carriages upto site of work 25mm dia

32mm dia

40mm dia

50mm dia

P/F of Air Releasing Valves (single acting) including cutting of bore hole , welding of the pedestal rod and providing laying of cement concrete 1:3:6 mix with shuttering box PGI 9”X9”x12” around the pedestal rod with all carriages and head load upto actual site of work 25mm dia Air Valve

20mm dia Air Valve

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. Upto 150 mm diameter.

Above 150 mm diameter.

Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge Upto 150 mm diameter.

Above 150 mm diaupto 350 mm dia.

Labour for cutting C.I. pipe with steel saw. 80 mm diameter C.I. pipe

100 mm diameter C.I. pipe

125 mm diameter C.I. pipe

150 mm diameter C.I. pipe

200 mm diameter C.I. pipe

250 mm diameter C.I. pipe

Providing of plastic buckets, Mug, Brooms, Wippers etc of good quality at various plants complete.

Fabrication of GI bends of required angle/size, Tees, tail pices etc at site using welding job including cutting of pipes, fixing of flunges, nuts, bolts, washers etc for Washout system. The job includes carriage of man , machinary, carriage of pipe material from departmental store upto site of work complete in all respects. Cost of flanges will be paid separately 80mm dia

100mm dia

150mm dia

300mm dia

350mm dia

Providing of blue lamps including all sorts of carriages complete 1 ltr capacity

0.75 ltr capacity

Providing/ fixing of Rubber Gaskets 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Providing/ fixing of Rubber Washers 80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Supply/ fixing of pipe specials from open market, if not available in the Divisional stores of ISI marked standard make. 100 mm dia G.I Union

80 mm dia G.I Union

65 mm dia G.I. Union

50 mm dia G.I. Union

40 mm dia G.I. Union

25 mm dia G.I. Union

20 mm dia G.I. Union

80 mm dia G.I. Elbow

65 mm dia G.I. Elbow

50 mm dia G.I. Elbow

40 mm dia G.I. Elbow

25 mm dia G.I. Elbow

20 mm dia G.I. Elbow

80 mm dia G.I. Socket

65 mm dia G.I. Socket

50 mm dia G.I. Socket

40 mm dia G.I. Socket

25 mm dia G.I. Socket

20 mm dia G.I. Socket

80 mm dia G.I. Nipple upto 10"

65 mm dia G.I. Nipple upto 10"

50 mm dia G.I. Nipple upto 10"

40 mm dia G.I. Nipple upto 10"

25 mm dia G.I. Nipple upto 10"

20 mm dia G.I. Nipple upto 10"

15 mm dia G.I. Nipple upto 10"

25x25x20 mm dia G.I. Equal Tee

40x40x25 mm dia G.I. Equal Tee

50x50x40 mm dia G.I. Equal Tee

65x65x50 mm dia G.I. Equal Tee

80x80x65 mm dia G.I. Equal Tee

25x20 mm dia Socket/ Reducer

40x25 mm dia Socket/ Reducer

50x40 mm dia Socket/ Reducer

65x50 mm dia Socket/ Reducer

80x65 mm dia Socket/ Reducer

25x20 mm dia Elbow/ Reducer

40x25 mm dia Elbow/ Reducer

50x40 mm dia Elbow/ Reducer

65x50 mm dia Elbow/ Reducer

80x65 mm dia Elbow/ Reducer

100mm dia Elbow

100mm dia Equal Tee

100 mm dia G.I. Bend

80 mm dia G.I. Bend

65 mm dia G.I. Bend

50 mm dia G.I. Bend

40 mm dia G.I. Bend

Supply of Kerosene oil

Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity. For 0.50 HP to 2.00 HP

For 3.00 HP to 5.00 HP

For 5.00 HP to 10.00 HP

Dismentalling of complete reduction gear unit of de-sludge bridges for repairs by way of providing & manufacuring of complete reduction gear with hub. The job includes costing of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacemnet of ball bearings, pouring of required specific gravity ear oil in order to run the reduction gear in smooth order, refixing of same at the site of work incld. all sorts of carriage fro site of work upto workshop and back to site of work including testing & successful commissioning (complete job)

Hire charges of vehicle during day or night along with licensed commercial driver for site inspection / emergency situation/movement of officials / carriage of material within divisional jurisdiction including Driver and POL on need basis subject to approval of competant authority / Xen. Upto 30Km Journey.

For every additional Km after 30 Km

Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. subject to details of repair with voucher 5 KV to 10 KV

11 KV to 20 KV

21 KV to 30 KV

Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job. incld. all extra lift Using buckets, ropes etc. Manually

Through washout by Mix silt with water

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

50 to 80 mm nominal bore

Welding, including transportation of plant at site etc. complete By gas plant

Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms

Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms

Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km)

Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km)

Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km

Sand & Agg. 20 mm avg. lead of upto 01 Kms

Sand & Agg. 20 mm avg. lead upto 02 Kms

Sand & Agg. 20 mm avg. lead upto 03 Kms

Sand & Agg. 20 mm avg. lead upto 04 Kms

Sand & Agg. 20 mm avg. lead upto 05 Kms

Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km)

Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km)

Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km

40 mm Agg. avg. lead of upto 01 Km

40 mm Agg. avg. lead upto 2 Kms

40 mm Agg. avg. lead upto 3 Kms

40 mm Agg. avg. lead upto 4 Kms

40 mm Agg. avg. lead upto 5 Kms

40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km)

40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km)

40 mm Agg. avg. lead beyond 20 Kms per additional Km

Stone soiling avg. lead of upto 1 Km

Stone soiling avg. lead upto 2 Kms

Stone soiling avg. lead upto 3 Kms

Stone soiling avg. lead upto 4 Kms

Stone soiling avg. lead upto 5 Kms

Stone soiling avg. lead beyond 05 Kms upto 10 Kms (per Km)

Stone soiling avg. lead beyond 10 Kms upto 20 Kms (per Km)

Stone soiling avg. lead beyond 20 Kms per additional Km

Carriage of pipes from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport 100 mm and 125 mm dia DI/ GI pipes 1Km

100 mm and 125 mm dia DI/ GI pipes 2Km

100 mm and 125 mm dia DI/ GI pipes 3Km

100 mm and 125 mm dia DI/ GI pipes 4Km

100 mm and 125 mm dia DI/ GI pipes 5Km to 10 Km

100 mm and 125 mm dia DI/ GI pipes 10Km to 20 Km

100 mm and 125 mm dia DI/ GI pipes beyond 20 Km every additional lead

150 mm to 200 mm dia DI pipes 1 Km

150 mm to 200 mm dia DI pipes 2 Km

150 mm to 200 mm dia DI pipes 3 Km

150 mm to 200 mm dia DI pipes 4 Km

151 mm to 200 mm dia DI pipes 5 Km

150 mm to 200 mm dia DI pipes 5Km to 10Km

150 mm to 200 mm dia DI pipes 10Km to 20Km

150 mm to 200 mm dia DI pipes beyond 20Km for every additional lead

Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour Cement for an avg. lead upto 50 mtr.

Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Steel for an avg. lead upto 50 Mtr

Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Pipe for an avg. lead upto 50 Mtr

Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Soiling for an avg. lead upto 50 Mtr

Soiling for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Sand & Agg.20mm for an avg. lead upto 50 Mtr

Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

40mm Agg. for an avg. lead upto 50 Mtr

40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs.

Carriage of Pipes from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour 100 mm and 125 mm dia DI/ GI pipes 50 m

100 mm and 125 mm dia DI/ GI pipes beyond 50 m or part therof beyond first 50 m

150 mm to 200 mm dia DI pipes 50 m

150 mm to 200 mm dia DI pipes 50 m or part therof beyond first 50 m

Centering and shuttering including strutting, propping etc, and removal of form for. Foundations, footings, bases of columns etc for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and access platforms.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Stairs (excluding landings) except spiral staircases.

Clearing snow (with frost) from filtration plants / S.R and roads manually using picks and shovels ; Snow depth upto 150 mm

Clearing snow (without frost) from roads manually. Snow depth upto 150 mm

Snow depth over 150 mm but upto 250mm

Snow depth over 250 mm but upto 350mm

Snow depth over 350 mm but upto 450mm

Snow depth over 450 mm but upto 550mm

Snow depth over 550 mm but upto 650mm

Snow depth over 650 mm but upto 750mm

Snow depth over 750 mm but upto 850mm

Snow depth over 850 mm but upto 950mm

Snow depth over 950 mm but upto 1050mm

Snow depth over 1050 mm but upto 1150 mm

Snow depth over 1150 mm but upto 1250 mm

Clearing snow (with frost) from roads, manually using picks and shovels; snow depth upto 150 mm

Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site

Supply of fire wood / rejection wood incld. all carriages upto site of work, complete

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. (Nallah)

Providing / fixing of M.S. step collers from 100 mm to 450 mm dia including all sorts of carriages, complete

Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (welded)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Providing and Fixing of M.C.C.B.of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job 03 Pole 200 Amp.

03 Pole 100 Amp.

04 Pole 100 Amp.

02 Pole 32 Amp.

03 Pole 32 Amp.

04 Pole 32 Amp.

63 Amp 04 pole change over

supply and installation of 3.5 core cable 50 mm thick

supply and installation of 1.5 mm thick wire

Providing/ Fixing of 16 mm 04 core service cable, H.T (Aluminium)

Providing and fixing of Jointing Kit for cables along with other allied items, complete job

Providing and Fixing of 5-10 H.P. Starter of of ISI marked standard Make, the job includes dismantling of damaged /non functional starter and fixing of new one incl. all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant upto Divisional Stores, including testing, installing and commissioning complete job.

Providing and Fixing of running V-Belt of groove type for air blower, the job includes dismantling damages ones and fixing of new ones incl. successful testing, commissioning. All types of carriage complete

Providing fixing & commissioning of LED Flood Lights of 50 Watts with stand including all accessories required at site complete job inclusive all carriages.

Supply of LED lights of different Wattage of approved m ake ISI marked complete in all respects 15 W

Hire charges of J.C.B including fuel, driver and Crawling charges etc complete job (Runningcharges) payment shall be made on the basis of progress with photographic evidance

Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations

Supplying and Laying of polythene sheets (Black) at off take points during lean dscharge / Freezing

Opening out old wire crates those and re-binding after filling.

Filling empty cement bags with earth; including cost of sewing and strings; excluding cost of bags and Earth (1.25 cft) including placing of same.

Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively ) Dry

In ordinary soils disposal lead upto 50 m and lift upto 1.5 m

Supplying & fixing as per site requirement of Nylon rope on 10 mm dia of Standartd make including all carriages comp job

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Providing / fixing of slip ring complete set with cliffs, bushes all accessories for clarifloculator bridge. The job includes disassembling of the damaged slipring returned back to store and fixing of new one, including all carriages.

Cutting road and making good the same by way of laying rich mix of cement concrete .

Hire charges for welding plant for necessary repairs of pipe network/structures etc as per requirement including C/O operator, Genrator, welding rods, wiring and carriage of man and machinary complete in all respects as per requirement at site but excluding additional materials like collar, pipe specials, steel section etc.

Hand-packing stones in wire-crates; excluding cost of crates and stones

Supply of wire crates including all types of carriages upto site of work.

Providing coloured Photographs as per requirement/ works executed at various places on photo paper of size 4"X6"

Providing and Repair of Computer accessories, Desktops, Inktank Printers, copiers, cables etc. complete

Providing Installation of tents for mela

Repair of Computer Desktops/Laptops, Inktank Printers, copiers, cables etc. complete

Supply of Ink to Office Printer for Epson Ecotank L No.3210 including all carriages complete

Supply of Ink to Office Printer for Epson L No. 15150 including all carriages complete

Supply of Cartridge for HP Laserjet office printer (12 A / 88A)

Supply of Cartridge for HP Laserjet office printer (11 A )

supply of NPG-59 Toner Black for photocopier Original (Quality) Canon

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Repairment of monoblock motors of different capacities including dismembering, rewinding, refixing, testing, commissioning and all types of carriages complete in all respects 1.00 H.P