Provn of Special repair to Roof Treatment in Bldg No P-9A of 5/3 GR and Special repair to Bldg No P-49 (1 to 4) in MES colony at Mil Stn Bikaner under GE (N) Bikaner

Amount

Dismantling existing dado/flooring or tiles in bath WC and kitchen etc.

Demolition of Brick tiles or terracing tiles, single layer on roofs

Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar.

Demolition of reinforced cement work as in roof slabs (other than ground floors) beams staircases , landing chajjas and similar suspended work.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level.

Dismantling PVC water tanks cap exc 250 & n.exc. 500ltrs.

Taking down shutters of any desc exc 2 sq. m but n exc 4 sq.m each and refixing in the same opening after necessary easing adjustment etc

Taking down chowkhats or frames not exc. 1.50sqm each but with shutter (w/o taking of shutter from the frame )

Taking down chowkhats or frames exc. 1.50sqm each but with shutter (w/o taking of shutter from the frame )

Taking down shutters of any desc exc 1 sq. m but n exc 2 sq.m each and refixing in the same opening after necessary easing adjustment etc

Taking down cement plaster, any description on brick, stone or cement concrete surface wall including finishes (such as tiles, Mosaic) raking out joints, hacking for key & scrubbing down with water complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips including providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing 15mm dia and connection , fixed to wall

Taking up or down steel water tubing 20mm dia and connection ,wallor laid in floor

Dismantling pipes any description fixed to walls or laid in trenches in any position.

Excavation in trenches n exc 1.50m wide and not exc in 1.50m in depth for foundation etc. or for shafts wells cesspits manholes or laying cables etc not exc 10sqm on plan and not exc 1.50m in depth and getting out in soft soil

Returning filling in, including ,spreading levelling ,watering and well ramming in layers not exc. 25cm in soft/loose soil.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.50m above the starting point in soils

Form work to soffits of suspended slab such as roof slab not exc 200mm thick to rough finished surface of concrete

Formwork to chullah hoods, chajjas, troughs and similar items including edges

Form work to edges of conc. Flat floor and roofs n.exc 20cm wide to rough finished surface of concrete .

M&L Mild steel bars TMT 10 mm dia cut to length bent to shape required incl. cranking bending spirally for hoop for columns ,hooking ends and binding with and including mild steel wire not less than 0.9mm dia deformed or twisted bars.

Ditto, but 6mm to 8mm dia.

Ditto, but 6mm to 10mm dia as in stirrups

M&L Reinforcement cement concrete design mix M-25 slab supported on wails beams and columns in floor roof landing and the like using 20mm graded stone agg.

M&L RCC 1:2:4 type B1 using 20 mm graded stone aggregate in Chullah hoods; stairways (except spiral staircases) including steps (square or spandrel), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres

M&L for Rendering 05 mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement on ceiling

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:6,even and smooth w/o using extra cement .

M&L for 15 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished even and smooth with out using extra cement, incl mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)

M&L for Cement concrete 1:4:8 type D2(40 mm graded stone aggregate) in foundation filling and mass concrete.

M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position complete all as specified and as directed by Engr-in-charge.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M& L PCC 1:2:4 Type B1 (20 mm graded aggregate as in bands/lintels , bed plates,mud stops , copings, kerbs incl weathering , slightly rounded or chamfered angles etc

M&L 17-18mm thick granite machine cut slab table rubbed and polished granite as on cooking platforms incl. pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade laid over 20mm thick cement screed in cement mortar 1:6.

M&L 20-25 mm thick single piece machine cut kota stone slab as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing 15 mm thick screed bade in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 15 mm thick machine cut kota stone slab on vertical surfaces as in skirting/riser etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and also making edges rounded or bull nosed, over and including and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured non skid ceramic tiles 7 to 8 (square/rectangular) exceeding 0.18 sqm but n exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6

M&L for coloured non skid ceramic tiles 7 to 8 (square/rectangular) exceeding 0.11 sqm but n exc 0.18 Sqm in vertical surfacesetc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick rendering in CM 1:6

M&L for coloured non skid ceramic tiles 7 to 8 (square/rectangular) exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified.

M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)

M&L for polythene film black 150micron

M&L Applying evenly a tack coat of industrial bitumen 85/25 ,1.2kg/sqm incl cleaning surface.

M&l Lime concrete terracing as specified on roof.

M& L 40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified.

M&L Brickwork with fly ash bricks or brick tiles in brick-on-edge walls (less than 1/2 brick thick,) built in

S &F Sand stone 40 to 50 mm thick slabs in sunshades, chajjas, shelves, cills, landings,cover stones, templates, etc.n exc. 2m in length,punched dressed on face and along exposed edges,self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete.

S&F steel window (box type) both gauged and glazed shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with and without glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889/2018 and Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F Mild steel framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge

M&L for 2nd class hard wood 35mm glazed and skelton shutter open rebated and prepared to receive glass,gauge etc.(w/o sash bars)edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc.as spcd. Clause 8.20(a)

M&L 35mm thick second class hard wood plain framed pannelled shutter (two panels) with lock rail and pannel or 9mm BWP comerical ply or 12mm venered particle board with comerical face venering on both faces. The size of rail and style as per IS-1003 part kilin seasoned

M&L 25 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

M&L 18/19mm Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the steel frame at site as per specification.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 100 mm

S&F Butt hinges mild steel medium weight cold rolled of 100mm

S&F Aluminium anodised barrel tower bolt of extruded section of 150 mm

S&F Aluminium handles cast type anodised of 150 mm

S&F mild steel barrel tower bolt ,stove enamelled black with bright bolt of 150mm

S&F mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl. A minimum of 6bolts and nuts four on bolt plate and two on staple plate of 250mm long.

S& F Mild steel pressed handles, oval type, stove enamelled black

S&F Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F curtain rods 20 mm Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc.

S&F in replacement steel plate racks of size 900 x900 mm complete all as specified and directed all as specified

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane

S & F in replacement Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured with three layered wall and shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “D”.)

S&F sinks with drainage board made of stainless steel 1.00mm thick sheet for kitchen with plug washer waste pipe , mild steel brackets connecting union over all size915x460mm with bowl size 410x330x160mm but fixed in repair incl removing existing vitreous china sink with fittings.

S&F Waste pipe 40 mm for sink with coupling fixed in repairs.

M&L for refixing old steel tubing and connections in new or old position(Wall, ceiling, floors etc 15 mm bore

M & L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

Taking up or down steel water tubing 20mm dia and connection ,incl cleaning for refixing

M & L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

S&F Vitreous china wash down water closet white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap comp all as specified and FIXED IN REPAIR

S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.

S&F Pvc connection 15mm size with PTMT nuts of length 450mm.

S&F Vitreous china wash basin, white flat back, size 580x450 excluding traps waste pipe fixed with brackets fixed in repairs.

S&F in repair 32/40 mm dia PVC waste pipe for WHB/sink complete all as specified .(Min weight 45 to 60 gms .

S&F Bib taps cast copper alloy with chromium plated crutch or butter fly handle screwed for iron pipe for 15mm bore dia of pipe fixed in repair. Make Prayag T 300/Jaquar ESSCO TQT 511.

S&F Stop valve cast copper alloy(concealed type) with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair . ( make : CAT

S&F Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. Make Prayag T 310/ Jaquar ESSCO TQT 256.

S&F Chromium plated shower rose with swivel joints 75mm size. Make Prayag BS 73.

S&F PVC bath cabinet with mirror of sizw 350mmx450mm complete all as spfd and as directed. Make: Prayag/Cat Part No.551 or its equailvent approved make

S&F Towel rail 600mm long of cast copper alloy, chromium plated, fixed in repair complete all as specified and directed by Engineer-in-charge. Make Prayg/Jaquar/Parryware.

S&f peg set with stain less six hooks complete all as specified

S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm Make : Prayag or equivalent.

S&F 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 110 MM PVC sanitary connection for WC connector

Dismantling pipes any description fixed to walls or laid in trenches in any position.

S&F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm as in rain water pipe or laid in trenches/floors complete

S&F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm as in rain water pipe or laid in trenches/floors complete

S&F PVC SWR branch piece single equal or unequal 110mm

S&F PVC(SWR) branch piece single (Y) equal or unequal 75mm

S&F PVC(SWR) bends with and incl oval acess to any radius 110mm.

S&F PVC(SWR) bends any radius 75mm with and incl ovak acess

S&F PVC (SWR) vent cowl 75 mm

Supply only integral water proofing compound complete all as specified.

M&L Mild steel Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E- 250) quality-A®

M & L for applying 3 mm thick layer of wall putty on walls to give uniform finish on newly plastered surface complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete.

M&L for Preparing old plastered or unplastered surfaces and applying one coat of white wash on ceilling complete.

M&L for Preparing old plastered or unplastered surfaces and applying one coat of white wash on ceilling complete.

M&L for Preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete.

M&L two coats of oil bound distemper on walls including preparation on new/old/putty treated surfaces over coat of primer as per manufacturer's instructions complete all as specified and directed. .

M&L two coats of oil bound distemper on walls including preparation on old/putty treated surfaces over coat of primer as per manufacturer's instructions complete all as specified and directed.

M&L for preparing new plastered or unplastered surfacesof walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls and over a coat of primer as per manufacturer's instructions complete all as specified.

Complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls and over a coat of primer as per manufacturer's instructionscomplete all as specified.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer. all as specified.

M&L for preparation of old treated steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel all as specified.

M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint over a coat of primer. all as specified.

M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified.

M & L for Cement concrete 1:3:6 type C-2 bed to drain pipes including packing under, and haunching against the sides of pippe after they are laid and tested; in 150mm dia pipe.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and refofming benching as required.

M & L for Pruning of trees by cutting away dead or over grown branches or stem and removing to distance 3.00 M to from wall of the building (Mode of payment shall be each tree)

Surface dressing & remving of nushes and Grubby cut with roots from x- x 0f builidng remaining to same to a distacne n.exc 500 Mtr and making good to surrounding surface as directed by Engr in Charge.

S&F Chromium plated centre basin mixer for hot and cold water screwed down high pressure with lng screw shank and fly nut screwed for 15mm dia iron pipe completed all as specified and directed. Make. Prayag 7250/Jaquar ESSCO TQT516A.

S&F long Body Bid tap brass chromium plated with or without letter HOT/COLD. Make Prayag 7308/Jaquar ESSCO TQT 512A.

S&F concealed stop cock bras chromium plated screwed both ends and secured for iron pipe of 15 mm dia fixed in reqpir complete all as specified and as directed by Enginer-in-Charge. Make. Prayag 7318, Jaquar ESSCO TQT 514A.

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc complete all as specified and as directed by the Engr-in-Charge.

Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.

Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including new sunken box covered with and including 3 mm thick bakelite laminated sheet top cover of approved make for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 132 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 132 here-in-before but socket point on independent board complete as specifed as directed by Engineer - In - Charge

All as per item No 132 here-in-before but cable 2.5 Sqmm for 15 Amps switch socket outlet on independent board complete as specifed as directed by Engineer - In - Charge

All as per item No 132 here-in-before but one light point controlled by two 02 - way switch complete all as specified and as directed by Engineer-in-Charge.

S&F Switch piano flush type, Single pole 5 Amps, two way ISI marked, complete all as specified and as directed by Engineer-in-Charge Make : Legrand/Wipro/Havells

S&F Switch piano flush type, Single pole 5 Amps, one way ISI marked, complete all as specified and as directed by Engineer-in-Charge S&F Socket outlet 2 in 1, 3 pin, 5A ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F Socket outlet 2 in 1, 3 pin, 5A ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F switch socket combination 5 in 1, 5/16 amp flush type fixed on laminated sheet top cover (laminated sheet top cover is including in point wiring).

S&F Lamp holder insulated body with back plate for conduit/ casing capping fittings with LED Bulb 9 W complete all as specified and as directed by Engineer-in-Charge Make : CG/Havells/Phillips.

S&F Ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Supply & fix LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge. Cat Part no. SSk-BH-9W in make Syska / havell's / Phillips.

S&F Fan regulator electronic type, 230 Volt, 150 Watt 2 modules with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.

Sheet metal enclosure for distribution boards, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 6 ways double door , supplied and fixed in repair, including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make - Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/Strandard/BCH/HPL

S&F MCB single pole, 240 volts of rating 6-32 Amps, breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make : Legrand / Schneider / ABB/ Havells

MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand/ GE/ Seimens/L&T/Indo Asian/C&S/ABB/BCH /Havells

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 415 volts with 200 Amps rated bus bar, load line DB's are fittied with bus bar nutural links blank plates TPN vertical load line 6 ways suitable for TP/FP 'A' frame MCCB,includeing 100 Amps MCCB -01Nos ,MCB SPN 32 -08 Nos and MCB SP as required, complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivelent Legrand/ GE/Seimens/L&T/Schneider/Indo Asian/C & S/ABB/BCH/HPL Note :- DB's , MCCB & MCB shall be of same makes.

S&F Bell push flush type, 5 Amps, ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F Bell Buzzer, Ding Dong AC 230 Volts, single pole ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F Decorative ultra slim linear LED lightening fixture, energy efficent 18/20 Watt complete all as specified and directed by Engineer-in-charge.Make SYSKA/BAJAJ/PHILIPS

S&F concealed sub main wiring and providing new sub main wiring with 4 core, multi-stranded PVC insulated cable unsheathed 1100 volts grade with copper conductor of size 4 sq mm drawn PVC concealed conduct including earth continuity conductor cable of size 4 sq mm PVC insulated unsheathed copper conductor cable connected to common earth and earth dolly complete all as specified and as directed by Engineer-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I.

Taking down ceiling fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by Engineer-in-Charge.

Hanging only ceiling fan taking down vide item ser no 26 and connecting up with provn of 3 core of flexible cable of size 1.5 sqmm after complete rewinding ,over hauling, minor repair as required,painting and to make serviceable with replacement of bearing/ capacitor etc. complete all as specified and as directed by Engr-in-charge.

Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 3 core

Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class 'B' bricks complete all as specified and directed by Engr-in-charge.

Local tibba dry sand cushioning for protection of cable complete all as specified and as directed by Engineer-in-charge. Note Local approved tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning.

M & L GI tubing light grade for protection of cables with pole/ in ground of size 40mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.00 sq mm 3 core

GS BUILDERS AND ENGINEERS

M/S ASHRAFI CONSTRUCTION CO

N.K. CONSTRUCTION COMPANY

m/s gaurav enterprises

Beenu Co. Company

NARAYAN SINGH NARENDRA SINGH AND COMPANY

M/S BUDHRAM BISHNOI