33 KV LINE SHIFTING WORK IN DEPOSITE SCHEME UNDER EDD 1 MORADABAD

Amount

Safe carriage of the following material from Store Centre Majhola/JE's store to work site including loading and unloading at both ends :-

11 Mtr. long ST Poles.

13 Mtr. long ST Poles.

ACSR Dog Conductor.

Line material such as Cross-Arms, Pin Insulators, Guarding Angles, Guarding Wire, Disc Insulators, Cable Jointing Kits and 33 KV XLPE Cable etc.

Dismantling of the line by :-

Removing of ACSR Weasel/Dog conductor from all phases on line, making bundle and stacking at a safe place.

Uprooting of 13 Mtr./11 Mtr./9 Mtr./8.5 Mtr. Long PCC/ST Poles.

For 33 KV Line, Single support 11 Mtr. long ST Poles :- Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. Erection of support (pole) complete with fixing of 33 KV V-Type cross-arms and all other accessories by providing stone pad, cross arms, holding clamps, f-bracket and nuts & bolts etc. as per RESPO Norms.

For 33 KV Line, Double Pole structure with 13 Mtr. long ST Poles :- Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole). Erection of support (pole) complete work by fixing of D.P. Clamps and all other accessories. The work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per RESPO Norms.

Construction of Four-Pole Structure on 13 mtr long ST Poles including fabrication of MS Angle Channel, Cross Bracing etc. with proving and fitting of all type of clamps made of MS Flat of size 65x8mm. with Nuts, Bolts & washer, grouting of pole in size of 220x45x45 cm. with Cement, Sand and Brick Ballast in the ratio of 1:4:8, as per RESPO Norms.

Grouting of Poles Single line support :- Grouting of support in CC 1:4:6 (cement, sand and 40 mm. brick ballast) Grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per RESPO Norms.

Grouting of stay rods (20x1800mm.) including all works of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:6 (cement, sand and 40 mm. brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc.

Earthing of support with MS Earth Rod of (20x2500)mm. long including excavation of pit and driving MS Rod 3.0M apart from support and 0.5M below the ground level and connecting below the earth electrodes with the help of G.I. Wire No.6 SWG tightening with nuts and bolts.

Laying, sagging, stringing and binding of ACSR Dog Conductor with all other accessories on pole as per RESPO Norms.

Laying of 33 KV 3x300 sq.mm. cable in the over head line including making loops on both side.

Filling and fixing of new 33 KV Outdoor Type Cable Box suitable for suitable for 3x300 sq.mm. cable.

Providing and fixing of Danger Board with clamp, nut and bolts.

Providing and fixing of Number Plate with clamp, nut and bolts.

Providing and wrapping of barbed wire on 11 KV PCC Poles at a height of 2.75 Mtr. from the ground level as per RESPO Norms.

Painting of Poles with aluminium paint after red oxide primer paint.

Carriage of following from work site to Store Centre Majhola including loading and unloading at both ends :-

Aluminium Scrap.

Iron Scrap.

AMIT ELECTRICAL

Maksood Ali Contractor