MAINT OF CHARPOY GI PIPE, CHAIR ANDFURNITURE ARTCILE AT BSO (W) UNDER GE (W) COLABA, MUMBAI

Amount

(A) Removal of following unserviceable parts of existing furniture items of various MES F/DB/FD drgs carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueint, providing hinges, denting applying putty for levelled surface, placing every part in-tact and painting/polishing the disturbed portion, as applicable as per drgs, all as specified and directed. (B) Work will be executed where the furniture exist in different User Units of GE(W) Colaba including BSO'S Furniture Yard all as specified and directed.

Chair Dining FD-279

Removing the unserviceable front leg and S&F the new front leg in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable rear leg and S&F the new rear leg in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable upper/lower stiffener of back support and S&F the new upper/lower stiffener of back support in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable stiffener of leg bottom and S&F the new stiffener of leg bottom in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable front/rear/left/right rail of seat and S&F the new front/rear/left/right rail of seat in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable canning of seat and S&F the new canning of seat in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable PVC ring and S&F the new PVC ring in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Removing the unserviceable bracket of teak wood and S&F the new top bracket of teak wood in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture (chair dining) as per drawing No FD-279 all as specified and as directed

Chair Easy FD-229

Removing the unserviceable front left/right leg and S&F the new front left/right leg in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable rear left/right leg and S&F the new rear left/right leg in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable left/right arm rest and S&F the new left/right arm in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable front / rear/ left/ right rail of seat and S&F the new front front / rear/ left/ right rail of seat in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable top/bottom/left/right rail of back frame and S&F the new top/bottom/left/right rail of back frame in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable canning of seat and S&F the new canning of seat in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable canning of back and S&F the new canning of back in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable PVC ring and S&F the new PVC ring in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Removing the unserviceable bracket of teak wood and S&F the new top bracket of teak wood in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polich and match with the colour with high class glossy finish in the furniture (chair dining) as per drawing No FD-229 all as specified and as directed

Chair writing (FD-280)/similar pattern.

Removing the existing unserviceable stiffner and S&F new stiffner of Leg bottom similar new part as per Drg. All as directed

All as per item No 3.01 above but Front left/right Leg

All as per item No 3.01 above but Rear left/right Leg

All as per item No 3.01 above but upper/lower stiffner of back support

All as per item No 3.01 above but left/right arm rest

All as per item No 3.01 above but bracket of teak wood of size (20x75x75mm)

All as per item No 3.01 above but Front/rear/left/right rail of seat

Removing the existing unserviceable canning of seat and S&F new canning of seat

Removing the existing unserviceable PVC ring and S&F new PVC Ring

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polich and match with the colour with high class glossy finish in the furniture (chair writing)

Chair Dining Wooden FD-MAP-II-04

Removing existing unserviceable seat and S&F new seat complete with ply, foam cushion of 40 density 75 mm tapestry cloth and white cloth but 12 mm plywood BWP Grade

Removing of unserviceable front legs S&F new front legs in the chair dining all as spectifed and as directed

Removing unserviceable rear legs and S&F new rear legs

Removing unserviceable stiffner and S&F new stiffner

Removing unserviceable lower/upper stiffner and S&F new lower/upper stiffner

Removing unserviceable PVC ring and S&F new PVC ring

Removing unserviceable wooden bracket and S&F new teak wood bracket

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polich and match with the colour with high class glossy finish in the furniture (chair writing)

Table 3'x2' with drawer FD-283 & Table 3'x2 without drawer FD-284 without drawer similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg. All as directed

Table top of Teak Plank with sunmica

Stiffner of Leg

Long rail

Short rail

Drawer complete of Teak wood 6/12/18 mm

PVC Ring

Bracket of teak wood

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polich and match with the colour with high class glossy finish in the furniture (chair writing)

TV Trolley (FD/E6/MAP/04)

Removing of unserviceable top and supply and fixing new top of size 750mm x 600mm shall be made up of 18mm thick ply wood BWR Gde with both side laminated with laminate sheet approved colour /Shade as directed by Engg-in-Charge with polished 4 mm thick teak wood beading all round the top.

All as per item No 6.01 here-in-before but sides of TV Trolley of size 700mmx 500mm.

All as per item No 6.01 here-in-before but back of TV Trolley of size 700mmx 550mm.

Removing old unserviceable castors wheel and supply and fixing new castors wheel 50mm dia swivel type suitable for TV Trolley all as shown on drawing

Removing old broken glass and supply and fixing two sided movable 2 glass shutters of size 700mmx 275mm on aluminium channel fixed on front door alround. Glasses shall be of 5mm thick fixed with steel wheels of appropriate size for sliding on channel irrespective of what is shown on Drg.

Chair Dining PVC Bottom FD/MAP-II/05 , Removing the existing unserviceable part and S&F following similar new part as per Drg as directed

Front Leg

Rear leg

Upper/lower stiffener of back support

Stiffner of leg bottom

Front/rear/left/right rail of seat

PVC Bottom seat

PVC ring

Bracket of teak wood

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coat of French polish to match with the colour with high class glossy finish in the furniture (chair dining PVC Bottom) as per drawing No FD/MAP-II/05 all as specified and as directed

Charpoy GI Pipe FD-220/Similar pattern

Removing the exisiting all unserviceable ply wood from frame of charpoy, tightening/refixing the serviceable loose parts of frame supply & fixing 1948 mm long x 868 mm wide single piece fresh new plywood 12mm thick BWP Grade along with flush/countersunk bolt (06 nos in Qty) of dia 10 mm, length 50 mm and bolt top must be flat and of dia 25 mm each bolt must be consist of two cup washers & one nut, Hole on ply for fixing bolt must be made at a distance of two inch from centre of long rail and two coats of paint emanl of furniture Paint

Removing the exisiting all unserviceable all MS Cleats and S&F 60 mm x 30 mm x 5 mm MS cleats

Removing the existing all unserviceable MS angles and S&F MS angles of size 25 mmx 25 mm x 5 mm thickness and of length 868 mm

Removing the exisiting unserviceable long rail from charpoy GI Pipe tightening all loose parts and and S&F long rail made of GI pipe 32 mm dia medium Grdae ISI marked duly threaded both ends and fixing to charpoy all as per ZDrg No- 220 / similar pattern

Manufacturing of short rail out of unserviceable long rail duly threaded both ends and proper fixing in charpoy GI Pipe and Tighting all loose parts after removing existing unserviceable short rail carefully without damageing/disturbing other parts all as Drg No FD-220\/Similar pattern

manufacturing of legs made out of unsv short rail duly threaded one end and proper fixing in charopy GI Pipe and tightening all loose parts after removing existing unsv leg rail carefully without damage/disturbing other parts all as per Drg No-220/Similar pattern all as directed

Removing unserviceable elbow and S&F GI elbow 32 mm bore and tighting all loose parts as per Drg No -220/Similar pattern

Removing unserviceable check nut and S&F GI Check nut and Tightening all loose parts as per Drg No-220/Similar all as directed

Hat Stand Fd-23,233

M&L for removing old unserviceable plywood back of the hat stand & S&F of new back of size 1000mmx710mm of 6mm thick plywood BWP Gde ISI Marked of all as specified & shown on drg and directed by Engg-in Charge.

M&L for removing old unserviceable front ply of hat stand & S&F new front of size 1000mmx710mm made out of 6mm thick plywood BWP Gde ISI Marked of all as specified & shown on drg and directed by Engg-in Charge.

M&L for removing old unserviceable edging of the hat stand and S&F new teak wood edging of size 6mmx36mm to alround the hat stand all as specified & shown on drg and directed by Engg-in Charge.

M&L for removing old unserviceable pegs of the hat stand & S&F of new decorative Brass pegs of size 120mmx75mm(over all) as per sample approved by Engg-in-Charge all as specified & shown on drg and directed by Engg-in Charge.

Removing unserviceable old defaced mirror from Hat Stand and S&F new mirror 5.0mm thick (300x440mm) fixing with well seasoned indian teak wood beading of size 10x12 mm all as directed and speciafied and shown on drawing

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coat of French polish to match with the colour with high class glossy finish to teak wood and plywood all as specified and as directed

Priyanka Industries

Unitech Enterprises

REETA ENTERPRISES

F S ENTERPRISES

SARGAM ENTERPRISES

SHREE JAGDISH FURNITURE CO.

AGRAWAL ASSOCIATES

Yash enterprises

Bidder Name

AGRAWAL ASSOCIATES

Unitech Enterprises

Mahesh Traders

REETA ENTERPRISES

SARGAM ENTERPRISES

SHREE JAGDISH FURNITURE CO.

Yash enterprises

F S ENTERPRISES

Priyanka Industries