Repair and Renovation works of Arulmigu Kailasanathaswamy Temple, North Ariyanayagipuram, Cheranmahadevi Taluk, Tirunelveli District

Amount

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing Cutstone structures inclusive of necessary scaffolding charges, conveyance and all hire charges for all tools and plants and clearing the site after completion of work etc, complete

Pointing with Lime mortar 1:1.5 (One lime and One and Half Sand ) including cost and conveyance of all materials and all labour charges etc complete complying with standard specification.

Removing the Ceramic tiles and clearing away from the site member including including hire charges for tools and plants, scaffolding for working in heights and all incidental charges etc complete.

Dismantling the Brick work and clearing away from the site member including including hire charges for tools and plants, scaffolding for working in heights and all incidental charges etc complete. W-0015

Supplying and fixing of temple type door using teak wood for scantling and planks including all incidential charges etc,. Below 7'

Providing cut stone of the flooring to the temple :Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Providing cut stone of the flooring to the temple Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Providing cut stone of the flooring to the temple Brick work using using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:6 (One cement and six crushed stone sand) including curing neat finishing, etc., complete complying with standard specifiction. In Cement Mortar 1:6

Providing cut stone of the flooring to the temple Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing cut stone of the flooring to the temple Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cutstone flooring using cut stone slab 600 x 600 mm and not less than 100mm thick top Single line dressed and pointing with Lime mortar 1:5(One Lime and Five Sand) etc complete outer flooring

Scaffolding charges for vimanams and gopurams with trees wherever necessary for main formwork and providing with non flammable shaded coverings,providing ladder arrangements,country wood plank for working, inspection etc., complete hire charges only for erection,maintenance and removing the same on completion of the work. Upto 15' height (W-0210)

Painting with multicolour (Panchavaranam) good emulsion paints complete for the Vimanas/ Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in helghts, lifting of material cost of brushes etc., complete. - which include all extra for foldings -100 Sft. Superficial area.

Providing Stainless Hand Rail in alround the Theppakulam :Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Sub total

SRIDHARAN (BID ID -1356012)