REPAIR / MAINT OF CERTAIN WATER SUPPLY MACHINERY INCLUDING SUPPLY OF CHEMICALS FOR WATER SUPPLY SYSTEM IN EAST OF MG ROAD UNDER GE E/M LUCKNOW.

Amount

Transporting oil immersed starter of capacity 7.5 HP to 50 HP of any make /size from Pump House to contractor work shop , dismantling for carryout necessary repairs to starter and overhauling, including re-assembling complete all as specified . Note:- (i) New spares/ parts shall be measured & paid separately for unserviceble parts under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Attending the complaint of oil immersed star delta starter with auto transformer upto 50 HP capacity and AMF Panel round the clock including Sunday & Holiday at any location in Lucknow Cantt area with in specified time not more than two hours all as specified & directed by EIC. Parts renewed shall be measured & paid separately

Supply only set of fixed and moving contact.

Supply only of base plate assembly complete

Supply only set of auxiliary switch I No (Normal open contact) + 1 NC (Normal closed contact)

Supply only magnet coil with auxiliary winding rated 415V, AC, 50 Hz

Supply only set of current bar assemblies(Front) .

Supply only set of current bar assemblies (L1,L2;L3).

Supply only set of current bar assemblies (RYB) .

Supply only thermal overload relay type RB-1 63 range 25 to 40 Amp or 36 to 60 Amp.

Supply only start & Stop Switch .

Supply only thermal time delay, relay without transformer type RZ-12 having actuating time range 3 to 12 second .

Supply only kit kat fuse suitable for 25 HP starter .

Supply only terminal links RYB & Delta.

Rewinding of unserviceable / burnt auto transformer with existing size of winding wire .

Supply only reset push button assembly.

Supply only wire shapes from contactor to auto transformer.

Supply only wire shapes with lugs from contactor to contactor.

Transportation of submersible pump or motor 20 HP to 35 HP 3 phase, from pump house to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors/pump sets & depositing the same after necessary repair to site complete all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

M&L for cutting out the burnt existing winding of starter of submersible motor of any make and rewinding with the same size of , copper winding wire, etc as per existing all as specified and directed.

Straightening only of the slots of stator of submersible motor

Supply only thrust of ball bearing block complete for submersible motor

Renewal only of worn out gun metal bushes for submersible motor as per manufacturer's design

Supply and fixing in repairs PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 6 sqmm size, 8 mtr long complete with suitable clips.

Supply only sand guard of submersible motor

Supply only sleeves of end plates of submersible motor.

Supply only cable grommet (guard)

Supply only water seal

Re-metaling of motor shaft, turning to bring it to original size and shape and polishing of shaft of submersible motor complete all as directed

Supply & fixing coupling of submersible motor and pump with key

Jointing of broken motor shaft with new piece, making key slot, grinding to make coupling size, and balancing the roter

Complete overhauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after.

Supply only bowl bushes complete

Supply only neck ring complete

Supply only steel distance pieces & key

Supply only impellor stainless steel / gun metal as per existing

Supply only cast iron, bowl

Supply only CI, non return valve of required dia

Supply only Head Extention (cast iron)complete

Supply only inlet bouter diary (cast iron)

Supply only of Wedges of slots

Jointing of 3 core cable of any size by using puncture/ rubber compound roll & tape / Sealing compound

Complete removal of old painted surfaces of motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Transportation of submersible pump or motor 15 HP/7.5/5.0 HP 3 phase, from pump house to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump & depositing the same after necessary repair, reassembling complete to site all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

M&L for cutting out the burnt existing winding of startor of submersible motor of any make and rewinding with the same size copper winding wire, etc as per existing all as specified and directed.

Straightening of the slots of stator in repair of submersible motor make as directed

Supply only thrust ball bearing block as per existing size complete for submersible motor make

Renewal worn out gun metal bushes for submersible motor as per manufacturer's design and specification.

Supplty & fixed PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 6 sqmm size, 8 mtr long complete with suitable clips all as specified.

Supply only sand guard of submersible motor

Supply only sleeves of end plates of submersible motor.

Supply only cable grommet (guard)

Supply only water seal

Supply only studs with nuts of required length & dia

Re-metaling of motor shaft, turning to bring it to original size and shape and polishing of shaft of submersible motor complete

Supply only coupling of submersible & pump with key motor complete

Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after.

Supply only bowl bushes

Supply only neck ring

Supply only steel distance pieces & key

Supply only impellor stainless steel / gun metal as per existing

Supply only cast iron bowl assembly

Supply only CI non return valve of required dia

Supply only Head Extention (cast iron) complete

Supply only inlet bouter diary (cast iron)

Jointing of 3 core cable of any size by using puncture/ rubber compound roll & tape / Sealing compound complete

Complete removal of old painted surfaces of motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note;- Painting shall be done by spray machine.

Transportation of Centrifugal monoblock pump set/Horizontal submersible Pump- 10HP to 15HP, AC, 3 phase, 415/420 V from pump house at any location/Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site all as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, baking and making connection complete all as specified

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer

Supply only driven end bearing of pump shaft

Supply only gun metal / stainless steel bush of pump shaft

Balancing and repairing of pump shaft

Supply only non driven end bearing of pump shaft

Supply only of gland and packing

Supply only cooling fan

Supply only cooling fan cover

Supply only CI impeller of similar make as directed

Supply only connection pipe

Supply only coupling with studs between motor & pump

Supply only sleeve in motor's cover and making size equal to outer dia size of bearing in back cover complete all as directed

Supply only sleeve in moter's cover and making size equal to outer dia size of bearing in front cover complete all as directed

Remetaling motor shaft, turning for bring it to Internal dia size of bearing in to front end cover complete all as directed

Re-metaling of motor shaft, turning for bring it to Internal dia size of bearing in rear end cover complete all as directed

Supply only sleeve in Pump's cover and making size equal to outer dia size of bearing in back cover complete all as directed

Supply only sleeve in Pump's cover and making size equal to outer dia size of bearing in front cover.

Remetaling of Pump shaft, turning for bring it to Internal dia size of bearing in to front end cover

Re-metaling of Pump shaft, turning for bring it to Internal dia size of bearing in rear end cover

Supply only Neck ring

Removing of Centrifugal pump Set/Horizontal submersible pump set from its existing position and re-fixing of repaired pump set including renewal of worn out nuts & bolts and electric connection complete all as specified and directed.

Supply only driven end bearing of motor shaft

Supply only non driven end bearing of motor shaft.

Complete removal of old painted surfaces of pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note;- Painting shall be done by spray machine.

Transportation of monoblock pump sets/ Horizontal submersible pump set 1 HP to 3 HP, AC, Single phase, 220/240 V from pump house at any location/Yard in Cantt area contractor's workshop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete all as specified. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Cutting, opening of winding, re- winding of monoblock pump set/ Horizontal submersible pump set of any make and rewinding with same size of copper winding wire, varnishing, backing complete as directed.

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer. Balancing and repairing of pump shaft.

Supply only water seal and packing complete

Supply only driven end bearing of pump shaft

Supply only non driven end bearing of pump shaft

Supply only cooling fan

Supply only cooling fan cover

Supply only CI impeller of as make all as directed

Supply only connection plate

Supply only sleeve in Pump's cover and making size equal to outer dia size of bearing in back cover

Supply only sleeve in Pump's cover and making size equal to outer dia size of bearing in front cover.

Remetaling of Pump shaft, turning for bring it to Internal dia size of bearing in to front end cover

Re-metaling of Pump shaft, turning for bring it to Internal dia size of bearing in rear end cover

Supply only Neck ring

Supply only centrifugal switch

Supply only capacitor of required capacity

Removing of Monoblock pump Set from its existing position and re-fixing of repaired pump set including replacement of worn out nuts & bolts and supply and fixed nuts, bolts and electric connection complete all as specified and directed.

Complete removal of old painted surfaces of pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) all as specified. Note:- Painting shall be done by spray machine.

Supply and fixed in repairs Single Phase Preventor Relay all as specified and directed. Make: L&T/Minilac/C&S)

Dismantling and taking out faulty analog type Ammeter from LT panel and supply and fixing three phase Ammeter digital type upto 0 to 100 Amps with suitable CT's ratio of size 96 mm x 96 mm of any range as required at site including necessary control wire connection and testing complete all as specified and directed. Make: L&T/C&S/AE/Secure

Dismantling and taking out faulty analog type voltmeter from LT panel /feeder pillar box and S&F three phase power voltmeter digital type suitable for ( 0-500 volts) range, size 96mmx96mm size including necessary control wire connection and testing complete all as specified and directed. Make: L&T/C&S/AE/Secure

Supply and fixed in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 7.5 to 15 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 20 to 25 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed in repairs star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 30 to 50 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed in repairs MCCB 100 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 25 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

Supply and fixed in repairs MCCB 160 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 25 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

Supply and fixed in repairs MCCB 200 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 25 kA ajustable thermal setting, Ics=100%Icu@ with suitable size of sheet metal enclosure complete all as specified.

Supply and fixed in repairs Contactor ML-2, 3 pole, 415 Volts, 32 Amps rating including necessary electrical connection all as specified. Make; L&T/C&S/ABB

Supply and fixed in repairs Contactor ML-3, 3 pole, 415 Volts ,40 Amps rating including necessary electrical connection all as specified. Make; L&T/C&S/ABB

M&L Mild screw nut, bolts with washer 12 mm dia and 100 mm long ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed

Supply & fix in repairs electronic control timer type ET-100 of suitable capacity as required at site. Make:- L&T/ABB/ Legrand/ AE/Secure.

Supply & fix in reapirs engine starter relay of suitable capacity as required at site. Make:- L&T/ABB/ Legrand/ AE/Secure.

Supply & fix in repairs under voltage relay (Make:- PIC / EC / Wader.)

Supply & fix in reapirs 8 / 11 pin relay (Make:- PLA.)

Supplying, laying or fixing, in repairs, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 70 sqmm cross sectional area, 3 1/2 core, complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items.

All as per item No. 129 above but size of 50 sqmm 3.5 core.

S&F of submersible flat copper stranded cable 1100 Volt grade of size 16 sqmm 3 core complere all as specified and directed.

S&F of submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complere all as specified and directed.

Supplying and fixing in repair, connecting, testing and commissioning rupturing capacity MCCB 125 Amps , FP , 415 Volts, 25 KA, 50 Hz including spreader terminals complete all as specified and directed

Supplying and fixing in repair, connecting, testing and commissioning rupturing capacity MCCB 125 Amps , TP , 415 Volts, 25 KA, 50 Hz including spreader terminals complete all as specified and directed

Supplying and fixing in repair, connecting, testing and commissioning rupturing capacity MCCB 160 Amps , FP , 415 Volts, 25 KA, 50 Hz including spreader terminals complete all as specified and directed

Supply, installation, testing, commissioning & electrically connected feeder pillar outdoor type, single door compartmentized with looking arrangement canopy at top weather proof, verman/dust proof of suitable size cubical type factory made of CRCA MS sheet 3.15 mm thick machine pressed of size 60x60x40 cm & angle iron frame 40x40x6 mm for legs and including grouted in PCC 1:2:4 type B1 (20 mm graded stone aggregate) suitable 440 volts AC 3 phase 4 wire bus bar 4 pole made out of suitable size copper strip capacity 200 Amps Fully mounted on procelain insulator enclosed chamber with open able shutter both sides comprising with following complete all as specified.

S&F tail pipece in replacement Made out MS ERW pipe heavy Grade 100 mm dia upto 1.5m in length suitable for submersible pump upto 30 HP including making arrangements for fixing of tie rod, cutting thread & welding flange all as sper siterequirement complete all as specified.

Disconnection of submersible pump set of any size from existing system water supply & electrical and Taking out /Uplifting the U/S pump set from deep borewell with disconnected from lowering pipe line of any size with manual or suitable electric driven chain pully upto 240 ft depth reassembling after neccesary repair and re-lowering the pump set in same borewell re-connection of complete all as specified and directed. Note:- i) Repair of U/s pump set will be paid separately. (ii) All type of T/P required to complete the job will be arranged by contractor. (iii) Job will be done round -o-clock continued as per site requirement as directed by AGE. (iv) Delay in job will be charged on the basis of Rs. 500/- per hour. (v) Items required for motor connection such as PVC insulation tape, valcanised rubber / puncture tube etc will be provided by the contarctor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor.

S&F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 100 bore flange lowering pipe cut type complete all as specified and directed

S&F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 150 bore flange lowering pipe cut type complete all as specified and directed

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles, laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .

M&L laying well burnt old size Fly ash bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supplying and fixing galvanised mild steel pipe/tubing, 80 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified. Note:- Excavation & Earth work, mild steel clamps, bolts , nuts and washers shall be measured and paid separately.

Supply of liquid chlorine sodium hypochlorites (Grade-I) drinking water with 9% chlorine contents by volume conforming to IS-11673 in sealed non-chemical re-actined / oxidation LDPE containers of 60 Kg PVC tanks, as required on mothly basis with manufacturer's chlorine test certificate and manufacturer's date marked not more than 02 week ago complete all as specified and directed.

Supply only high strength calcium based granular containing appropriate quantities of chlorination dipensates / corrosion inhibitors to prevent encrustation / scaling in distribution system in 45 / 50 Kg packing of approved and tested from Govt lab or equivalent testing agency (not more than 02 months old packing) complete all as specified and directed.

Supply only bleaching powder the chlorine intent form 35-40% chlorine powder or chromate lime, used for water treatment complete all as specified and directed.

Supply only O-tolodine chlorine solution in packing of 500 ml bottles for testing of chlorine contents in water complete all as specified and directed.

Supply and replacing (in repairs) tubing suction / delivery pipe for metering pump complete all as specified & directed.

Supply and replacing (in repairs) front bearing for metering pump complete all as specified & directed.

Supply and replacing (in repairs) rear bearing for metering pump complete all as specified & directed.

Supply and replacing (in repairs) roller bearing for metering pump complete all as specified & directed.

Supply and replacing (in repairs) uniform gear for metering pump complete all as specified & directed.

Supply and replacing (in repairs) pump shaft for metering pump complete all as specified & directed.

Supply and replacing (in repairs) spring for metering pump complete all as specified & directed.

Supply and replacing (in repairs) diaphragm for metering pump complete all as specified & directed.

Supply and replacing (in repairs) dozing head for metering pump complete all as specified & directed.

Cutting out the existing winding metering pump electric motor of any make 3 phase , 400/415 Volts, AC of any make, rewinding with the same size of coper winding wire as exisiting all as specified and directed by the Engineer-in-Charge.

Supply and replacing (in repairs) of nylon braided PVC pipe 15 mm bore all as specified and directed by the Engineer-in-Charge.

Supply and replacing (in repairs) of nylon braided PVC pipe 20 mm bore all as specified and directed by the Engineer-in-Charge.

Supply and replacing (in repairs) chlorine testing kit stand type all as specified and directed by the Engineer-in-Charge.

Supply and replacing (in repairs) brass nipple all as specified and directed by the Engineer-in-Charge.

Supply and replacing anti siphon valve of metering pump and make the serviceable complete all as specified and directed.

Supply and replacing (in repairs) connecting nut 3/8" with adopter for dosing pump complete all as specified and directed.

Supply and fix in repair PVC suction and delivery tubing 3/8" for dosing pump complete all as specified.

Supply and replacing (in repairs) rotor assembly with bearing brackets and tolerance rings complete all as specified

Supply and replacing (in repairs) coil, 250V, 50 Hz complete all as specified.

Supply and replacing (in repairs) pump head ( ferrule 1/4" and duckbill included) complete all as specified.

Supply and replacing (in repairs) roller assembly complete all as specified.

Supply and replacing (in repairs) Pump tube (rooler type) complete all as specified and directed

Supply and replacing (in repairs) injection check valve 3/8" complete all as specified.

Supply and replacing (in repairs) weighted suction line strainer 3/8" complete all as specified.

Supply and replacing transformer oil from oil immersed starter of any rating situated in any sub station located in Cantt duly heated upto the required tempereture all as specified and directed by EIC.

Supply and fixing Non corrosive Polyvinyl Chloride (PVC) tank for chlorination of capacity 250 Ltrs with openable lid complete incuding necessary fitting as required at site all as specified and as directed by the Engr-in-Charge.

Labour only with grass cutting tool for grass/ bushes cuting & complete cleaning surrounding the pump houses./ water supply installation/ bore well in entire contract period for periodicity of at least one time in every month to each installation complete all as specified and directed.

Supply oly Alum ferric conforming to IS complete all as specified and directed.

Supply oly Soda Ash ( Na2Co3) , dry powder, free flowing, 99% ( w/w) complete all as specified and directed.

Supply only Copper Sulphate (Cuso4) commercial quality complete all as specified and directed.

Supply only Steel wire brush 150 mm long and 75 mm wide with wooden base as per sample complete all as specified and directed. .

Supply only nylon brush 900 mm long and 150 mm wide with wooden base as per sample complete all as specified and directed.

Supply only nylon brush 300 mm long and 75 mm wide with wooden base as per sample complete all as specified and directed.

Supply only Nylon rope, multidranded , best quality of 10 mm dia complete all as specified and directed.

Supply only rubber / PVC hand gloves to handle chlorine / liquid complete complete all as specified and directed.

Supply only PVC float ball 300 mm dia. ISI marked complete all as specified and directed.

Supply only broom coconut complete all as specified and directed.

Supply only P.V.C flexible non toxic hoses( off white) of 40mm outer dia, in standard length of 30 M roll complete all as specified and directed.

Supply only Descaling compound for cleaning of pool floor. complete all as specified

Sanjai sales and services

commercial construction