Survey, Design, Supply, Installation, Testing and Commissioning of Micro Irrigation System under Chitradurga Branch Canal for providing irrigation facility to 9590 Ha under Block-8A, 8B & 8C and filling up of 12 No. tanks coming under Chitradurga Branch canal of Upper Bhadra project with all accessories, O and M for 5 years after the successful commissioning and transfer (BOMT) on Turnkey basis - Excluding drip laterals and including sub main line and blind raisers (CBC Drip Package-VII)

3.2 (b) The intending bidder should have satisfactorily completed (at least 90% of contract value) as prime contractor, at least one similar work such as Micro Irrigation System and allied works/ LIS works/Bulk water supply with lift / Pressure distribution works of value not less than Rs. 15936.16 Lakhs (usually not less than 50% estimated value of contract amount put to tender) here value of contract implies final cost of work executed as per contract during last 5 years (i.e. 2020-2021 to 2024-2025). An additional weightage of 10% each year will be added to the cost of work done to bring it to present price level. The work done certificate should be obtained from a competent authority not below the rank of Executive Engineer of the concerned division and countersigned by the Superintending Engineer of the concerned circle. If the bid is submitted as joint venture, then one partner of the JV should fully meet the PQ requirement of similar nature of work

3.2( c) Executed in any one year, the following minimum quantities of work during the last five years usually 80 of the peak annual rate of construction S. No.Description of Item Unit Quantity I. Prime Contractor 1. RCC M 20 & above Cum.5791 2. Steel Reinforcement 539Tonne 3. Length of Pipeline i MS Pipe not less than 450 mm diameter 4 Km ii HDPE Pipe not les than 110 mm diameter 67 Km II Electromechanical Work i 11 KV and higher HT Line 22 Km ii 11 KV and above substation with transformer Aggregate 2202 KVA

3.2(d)The intending bidder/Joint venture partner should have possess required valid electrical license for executing the Micro Irrigation system and allied works/LIS works/Bulk water supply with lift/pressure distribution electrification works and should have executed similar works totaling to Rs. 599.50 Lakhs. (Usually not less than 50% of electrical works) in any one year

3.2(e)The intending bidder should have executed Substation work/Transmission Line/ got executed through reputed CEIG Registered electrical contractor. Note on. i.If the bidder has not executed the above works listed, bidder should have got executed the work through reputed CEIG registered electrical contractor who has completed the above works in one year. A declaration shall be furnished in the Technical bid by the bidder and the intending electrical contractor to agree to carry out the work if the work is awarded to this bidder. ii.The successful bidder should furnish documents in support of the work done by CEIG registered electrical contractor as per the above criteria along with the bid.The work done certificate should be obtained duly signed by an officer not below the rank of Executive Engineer of the concerned Division or equivalent in case of other Government undertaking (either directly to the Electrical Contractor or to the Main Contractor who in turn shall provide a certificate of having engaged the above Electrical Contractor for the said work).

3.3(a) Each Tenderer should further Demonstrate a i Availability by owning at least 50 of the required/specified key and critical equipment for this work ii The remaining 50 can be deployed on lease/ hire basis for all works, provided the relevant documents commitment greements etc for this work are furnished.Sl.No.Equipment s Owned Hire/ Rent 1 Excavator 3 3, 2Concrete Mixer 2 2, 3 Tippers 6 cum capacity 3 3, 4 Welding Transformer 2 2, 5 Bending Machine 2 2,6 Pug Cutting Machine 2 2,7 Spinning Machine 2 2, 8 Grouting Equipment 1 1, 9 Air Compressor 8.5 Cm 2 2, 10 5 HP Pump 2 2,11 Water Tanker 8000 Litres 2 2,12 Mobile Crane revolving 8T 2 2,13 Grinding Machine 1 1,14 Drilling Machine 2 2

3.4 To qualify for a package of contracts made up of this and other contracts for which tenders are invited in this IFT, the Tenderer must demonstrate having experience and resources to meet the aggregate of the qualifying criteria for the individual contracts. Sl. No. Category Qualification and Experience No. of Persons to be Deployed 1. Project Manager B E Civil 10 years 1 2. Senior Engineers B E Civil 7 years 2 3. Site Engineers B E Civil 5 years 2 4. Site Engineers B E Mechanical 5 years 1 5. Site Engineers B E Electrical 5 years 1

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value of Rs. 31872.32 Lakhs. The available tender capacity will be calculated as under. Assessed available tender capacity A N 1.5 B Where, d A Maximum value of civil engineering works executed in any one year during the last five years updated to the present price level taking into account the completed as well as works in progress. During 2020-21 to 2024-25 N Number of years prescribed for completion of the works for which tenders are invited. B Value, at present price level, of existing commitments and on-going works to be completed during the next 24 months period of completion of the works for which Tenders are invited Note 1 The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. 2 Failure of bidder to comply with the requirement in the prescribed proforma for qualification information as per section 3, will constitute sufficient ground for rejection of the technical bid. 3.7 Even if the Tenderers meet the above criteria, they shall be immediately disqualified if they are found to have - made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or - Record of poor performance such as abandoning the works, not properly completing the contract, litigation history, or financial failures etc. and/or - Participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification.

3.2(a)Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.31872.32 Lakhs (Usually not less than two times the estimated annual payments under this contract). If the bid is submitted as JV, then the PQ requirement of minimum financial turnover shall be considered on the basis of combined resources. The lead partner should have an annual financial turnover of not less than 50% of total turnover indicated above in any two years during last 5 years (i.e. 2019-2020 to 2023-2024). All document/certificates issued by a Chartered Accountant should have a UDIN (unique document Identification Number) generated through the ICAI (The Institute of chartered Accountants of India) Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document.Note Audited balance sheets and Turnover certificate duly certified by Chartered accountant with their unique document identification number (UDIN) generated by ICAI portal should be uploaded. Certificate without UDIN will be treated as invalid. Financial turnover of previous years will be given a weightage of 10% per year based on the rupee value to bring them to 2024-25 price levels

3.3(b) The tenderer/firm/company shall furnish details of liquid assets and or availability of credit facilities of Rs.6564.02 Lakhs for the work mentioned above for meeting the required funds in the form of credit lines / line of credit / certificate from Scheduled Commercial Bank (usually the equivalent of the estimated cash flow for three months in the peak construction period).