Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-Finance H NO 9 194 A6 1ST FLOOR NR VATARESHWAR TEMPLE ST INEZ PANAJI GOA | NORTH GOA | GOA | 403001 | ₹3.6 L | L1 | Accepted-Finance Lowest amount quoted, hence accepted. |
| 2 | L2₹3.9 LRejected-Finance GOA GOA | SOUTH GOA | GOA | 403703 | ₹3.9 L | L2 | Rejected-Finance Rejected. |
| 3 | L3₹4.6 LRejected-Finance | ₹4.6 L | L3 | Rejected-Finance Rejected. |
Tender Value
₹4.4 L
EMD Value
₹8,896
Closing Date
1 Apr 2026, 3:00 pmClosed
Executive Engineer I
Executive Engineer I, WDI(Bldgs.) PWD, Panaji Goa.
M/R to Residential bldg under works Division I, PWD SH - Repairs to the qtr No 17-B of Government quarters at Patto Panaji Goa.(2nd call)
2026_PWD_28380_1
PWD/WDI/ASW-17/2025-26/62/05
Open Tender
Civil Works - Buildings
30 days
Executive Engineer I, WDI(Bldgs.) PWD, Panaji Goa.
Please refer Tender documents.
3 documents required · 3 mandatory
₹4,000
₹8,896
28 Apr 2026
25 Mar 2026
2 Apr 2026
25 Mar 2026
1 Apr 2026
25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | |||||
| 2Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4 fine sand) | |||||
| 3Removing old loose bottom or side cover of RCC slab beam columns etc. rubbing surface of concrete steel using wire brush and applying 2 coats of Alkaline rust converting primer (Feovert) after a waiting time of 6 hrs between coats and then applying another anti corrosive protective coating system ) for reinforcement bars (IPNet-RB) Conforms to IS-2770 Part-1 (Pull out Test) ASTM-3963-86 (Adhesion Test) and then applying concrete penetrating corrosion inhibitor (EPCO-KP100) and applying bonding new to old concrete (Epibond) Conforms to ASTM-C-882-87 and plastering on the fresh bond coat with Polymer Modified Mortar (Monobond) with 20mm C.M 1:3 and finishing coat of 6mm C.P 1:3 (1 Cement : 3 Sand ) incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. | |||||
| 4Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. | |||||
| 5Applying one coat of distemper primer of approved brand and manufacture on wall surface. | |||||
| 6Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. | |||||
| 7Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade. | |||||
| 8Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade. | |||||
| 9An elastomeric cementitious waterproof coating for concrete and masonry.;Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding ladders supporting materials etc. complete. Rates shall be inclusive of all labour materials tools and plant etc. complete. | |||||
| 10Applying one coat of cement primer of approved brand and manufacture on wall surface. | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tendernotice_2.pdf
PDF • 1.65 MB
BOQ_28823.xls
BOQ • 0.46 MB
Download all tender documents and submit your bid