Loading…
Loading…
Tender ID
Tender Value
₹84.6 L
EMD Value
₹1.7 L
Closing Date
19 Feb 2026, 9:30 pmClosed
Rural Development and Panchayat Raj Department
SHRIDEVI SHINTRE
Metalling and Ashpalting Road From Hulagabali Halyal Road to Kempi vasti Road km 0.00 to 2.00 at Hulagabali village in Athani Taluka of belagavi Dist
RDPR/2025-26/RD/WORK_INDENT23671
RDPR/2025-26/RD/WORK_INDENT23671
Reserved
Roads
Two Tender Document System(Two Cover)
RDPR Division Office Chikkodi
15 documents required · 15 mandatory
PWD Registration Certificate Class I/II/III
Minimum financial turnover civil engineering construction works not less than one times the annual payments from this contract Rs. 85.00 Lakhs
Satisfactoriy completed (at least 90percent) as prime contractor at-least one such any nature work of value not less than Rs.21.25 lakhs (25percent of amount put tender)
Executed in any one year the following minimum quantities of work Excavation / Embankment 582.00 Cum, GSB 239.00 Cum, Asphalting 1060.00 Sqm etc 80 percent of peak rate of construction
Liquid assets and or availability of credit facilities of no less than Rs. 30.00 Lakhs (estimated cash flow for 3 months of peak construction period)
As per Govt Circular no GO-FD/AE 263/EXP12-2022 dt 11.05.2022, this clause for owning key equipment for works costing upto Rs 3.00 Crores is exempted
List of existing commitments and ongoing works
List of works for which tenders already submitted
GST Certificate
Bid Capacity
Pan card
Address Proof and Mobile Number
Caste Certificate from Respective Tahshildar Officer CATEGORY-1
Residential Certificate
Staff pattern
₹2,120
₹1.7 L
9 Feb 2026
9 Feb 2026
21 Feb 2026
18 Feb 2026
Metalling and Ashpalting Road From Hulagabali Halyal Road to Kempi vasti Road km 0.00 to 2.00 at Hulagabali village in Athani Taluka of belagavi Dist
code01 Clearing and Grubbing Road Land: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli... 32.40 100 Sqm
code02 Scarifying Existing Granular Surface to a Depth of 50 mm by :Mechanical Means using Hydraulic excavator etc complete as per direction of the Engineer incharge of the work. 8117.00 Sqm
code03 Compacting original ground supporting embankment
Loosening, leveling and Compacting original ground supportingembankment to facilitate placement of first layer of embankment,scarified to a depth of 15... 1282.05 Cum
code04 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading... 1965.81 Cum
code05 Granular Sub-base - Grading III Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by ... 955.38 Cum
code06 Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading... 359.00 Cum
code07 WBM Grading Grading-I (63 mm to 45 mm) - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification includingspreading in uniform thickness, ... 545.77 Cum
code08 WBM Grading-II (53 mm to 22.4 mm) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification includingspreading in uniform thickness, hand pa... 317.81 Cum
code09 Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0... 4237.50 Sqm
code10 Providing and applying tack coat with RS I Bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared Granular surface etc complete as per direction of the Engine... 4237.50 Sqm
code11 Open - graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to... 4237.50 Sqm
code12 Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 Case - ... 4237.50 Sqm
code13 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c... 420.00 Cum
code14 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris... 226.00 Sqm
code15 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi... 2.00 Each
code16 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad... 1.00 Nos
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-3 NEW SC ST CATAGORY 1 AND 2A 23671.docx
Tender Document • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .