Balanced quantity of finishing items for Water Storage Tank at L.D Hospital

Amount

Providing and fixing of exterior wall cladding tiles comprising of nominal size of 10 mm thick including 12 mm thick bed of cement mortar in 1: 3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade and of approved make of any size as approved by Engineer- in-Charge complete job Icluding scaffolding etc.

Providing and laying Industrial Floor tile of size mention below with water absorption less than 0.5% and conforming to IS:4457:2007, flexural strength not less than 38 N/sqmm& Breaking strength not less than 4000 N, of approved make, in shade as per architectural drawings & as per Engineer in Charge, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade using epoxy laticrate (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charg. Color Scheme : - Ivory / Terracota in combination Size of Tile :- 300 mm x 300 mm x 15 mm thick.

Providing and laying vitrified(Double Charged ) floor tiles for floor & skirting in different sizes (minimum 10 mm thick) with water absorption less than 0.08% and conforming to IS:15622 of approved by Engineer Incharge as per architectural drawings, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm Model : K6209/ K6201/ K6211/K6208 OR equivalent with same shade.

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Extra for pre finished nosing in treads of steps of kota stone/ sand stone slab.

LEVELLING course of Cement concrete in flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete. 25mm thick with 12 mm nominal size stone aggregate

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed byEngineer-in-Charge. 2.6.1 All kinds of soil

Providing and laying of stone soling in foundation and plinth incl ramming and all carriages upto site of work.

Providing and laying in position cement concrete in 1:4:8 grade as Mudmat including curing but excluding the cost of centring and shuttering.as directed byEngineer-in-Charge.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)as directed byEngineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing by way of dash fastners in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works . as directed byEngineer-in-Charge.

P/F of CGI sheets 0.5mm thick colour coated high rib roofing sheets incl cost of all nails and screws ,caps ,washers over screws, including ridge , complete job.as directed byEngineer-in-Charge.

Painting wood work with deluxe multi surface paint of required shade. ) Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture , including scaffolding complete job, as directed by Engineer-in-Charge.

Painting steel work with deluxe multi surface paint of required shade to give an even shade Two or more coats applied @ 0.90litre /10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.

Labour charges for site clearance including removal of bushes ,shrubs and other vegetation and disposal of same from the site of work

Providing and fixing Powder coated aluminum (minimum thickness of powder coated 50 microns) aluminum work for doors, windows, ventilators and partition frames with standard built up section fixed with dash fastners of required size with each aluminium section smooth ,rust free,straight and jointed mechanically including cleat angle, aluminium snap beading and other required fittings excluding cost of hardware fittings.

P/f of Powder coated aluminium works for shutters of Doors ,windows and ventilators including hinges /pivots and fixing of fittings wherever required including fixing of EPDM rubber /neoprene gasket and other fixtures but excluding c/o hardware fittings

P/F Of Aluminium partition panel 4 mm thick for partition and door shutters incl cost of rubber -u beading and other fittings includuing all fiting & fastning complete job.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete and the directions of engineer- in-charge. incl Cost of aluminum snap beading With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

P/F of powder coated aluminium hardware fittings for doors and window shutters incl all fittings

Tower bolt (150mm) 6"

Door Handle 8" size

Al-Drop 10" size

Poviding and fixing of imported wood penelling 12 mm thick T&G Ceiling for soffit , including frame work of 2" x 1.5" thick budloo wood with spacing 0.75 m c /c , with cornice along the wall of building of size 65 mm x 65 mm ,Including polishing of the wood work with two coats of touch wood polish, including scaffolding, nails etc complete job

First Class Brick Masonary in Cement Mortor 1:6 (1 cemenent : 6 sand) with bricks of class 75 in super structure upto floor V (by manual means) including cost of carriage of all material involved , scaffolding , carriages, leads,lifts, complete job.

Plastering walls with 12 mm thick Cement Plaster of mix 1:6 ( 1 cement : 6 fine sand) including cost of carriage of all material involved scaffolding, carriages, leads,lifts, complete job.

M/S AZIZ KASHMIRI AND CO

ZUBAIR RASHID KHAN

M/S ZUBAIR MAJEED

M/S FALLAH CONSTRUCTIONS