Construction of Administrative Building in Veerapandipirivu Milk Chilling Center at Tiruppur.

Amount

Earthwork open excavation for foundation in all soils and sub-soils and to full depth as may be directed except hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary, refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, watered, well rammed, consolidated and depositing the surplus earth on bank with initial lead of 10m & initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specification. 0 to 2m Depth

Supply and filling with M sand for foundation and basement to required thickness and in layers of not more than 15cm thick, watered, well rammed and consolidated etc.., complete as directed by the Federation Officers and as per standard specifications

Plain Cement Concrete 1:4:8 using 40mm size hard granite broken stones for foundation including de-watering if found necessary and laid in layers of not more than 15cm thick for flooring including rendering the top surface rough to take floor finish etc..., and including side shuttering if required and compaction, curing etc..., complete as directed by the Federation officers and as per standard specification.

Supply and filling with Gravel for foundation and basement to required thickness and in layers of not more than 15cm thick, watered, well rammed and consolidated etc.., complete as directed by the Federation Officers and as per standard specifications

Brick work in Cement Mortar 1:3 (one part cement and Three parts sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officer and as per standard specification.For Foundation and Basement

Brick work in Cement Mortar 1:5 (one part cement and five parts sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officers and as per standard specification. For Foundation and Basement

Above basement upto 4.50m ht.

Up to 4.50m to 9.00m ht.

Supplying , erection and steel centering for all RCC works using M.S Sheet, M.S. angles casurina props C.W.joints for all type of RCC works (ie) beams, roof slab, lintel, column footing, column & roof beam etc., including necessary supports with all cross bracing, filling the slits and holes the reprieved materials should be taken by the contractor and side shuttering etc., complete as directed by the departmental officers. Up to basement - Column surface

Up to basement - plain surface

above basement level 3.30m height - Column surface

above basement level 3.30m height - plain surface

up to 3.30m to 4.30m height - Column surface

up to 4.30m to 5.30m height - Column surface

up to 5.30m to 6.30m height - Column surface

up to 5.30m to 6.30m height - plain surface

up to 6.30m to 7.30m height - Column surface

up to 6.30m to 7.30m height - plain surface

up to 7.30m to 8.30m height - Column surface

up to 8.30m to 9.30m height - Column surface

up to 8.30m to 9.30m height - plain surface

upto 9.30 - 10.30m height - Column surface

upto 9.30 - 10.30m height - plain surface

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. For Foundation and Basement

Above basement up to 4.50m ht

up to 4.50m to 9.00m ht

Above 9.00m Height

Supplying, fabricating and placing in position of reinforcement, grills for all RCC works including cost of steel and binding wire , cutting and tying etc., complete as directed by the departmental officers. MS/RTS rods in all floors

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for the machinery bed and other bed blocks works and flooring including curing (excluding centering) etc., complete as per standard specifications and as directed by the departmental officers.

Brick partition walls of 11.50cm thickness using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) For Super structure in F.F

Providing Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with machine pressed tiles of size 230x230x20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as directed by the departmental officers

Paving the floor with best quality of stain free nano polished Vitrified Tiles 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 10mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the Flooring with ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of 300x200x6mm following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing of Mild steel grills for windows, corridor etc., including priming coat and labour charges etc., complete as directed by the departmental officers.

Supplying, fabricating and fixing of Aluminium White coloured Powder Coated Glazed window/ ventilators of standard section and specification etc., including 5mm thick pinned glass fix in position with all the accessories, locking arrangements etc complete as directed by the federation officers and as per standard specification

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work Plain Pre-laminated Door

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter - Solid panel PVC door with frame

Supply and fixing of Door closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like Godrej (make) (with ISI Monogram) etc. complete., (L.R)

Supplying and fixing in position of 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the center of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing and scaffolding etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers

Supplying and painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (exterior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers.

Supplying and fixing in position of tubular hollow Box section following thickness including cutting, welding and fixing in purline etc., completed with standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. the vertical pipe has encased in the base concrete. the rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc, complete.(SOR)

Supplying and fixing in position of Powder coated G.I roofing sheet of 0.47mm thick with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers.

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided etc., complete as directed by the departmental officers.

Painting two coats of new iron work using ready mixed enamel paint of approved quality and colour over a priming coat etc. complete as directed by the departmental officers. (such as steel door , grill, M.S Channel & angle etc.,)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings etc., complete with standard specification as directed by the departmental officers. (The Water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position of stainless steel health faucet approved quality and all accessories etc., complete and as directed by the departmental officers.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.

Urinal separator : Supplying and fixing in position with Double side polished jet black granite stone of 18 to 20 mm thick of approved quality set in CM 1:3 and pointing with white cement and adhesive components etc, complete for the purpose of urinal separator as directed by the Federation officers and as per the standard specifications.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 500 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing best approved best quality Procelain CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Providing 5000 lts PVC water Tank over Administrative Block including all labour and lead etc. Complete

Supplying and fixing in position "PVC Soil pipes" of pressure - 6kg / cm2 of the following best approved quality and make conforming to ISS of the following diameter and providing leak proof joints with cement, spun yarn etc., including fixing the wall with necessary teak wood plugs, brass screws, mild steel clamps etc., and giving connections to all sanitary fittings including dismantling brick masonry, RCC floor or roof slab etc., wherever necessary and redoing the disturbed porition to the original condition including painting the cast iron pipes and fitting with two coats of anti-corrossive paint etc., complete complying with standard specifications- Below Ground Level - 50mm dia PVC pipe

110mm dia PVC Pipe

160mm dia PVC Pipe

Supplying and fixing in position of the following PVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesive etc., including fixing to walls with necessary teak wood plugs screws etc., and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc., complete complying with standard specifications- standard specifications. 50mm dia PVC Elbow

50mm dia PVC Bend

50mm dia PVC TEE

50mm dia PVC coupler

110mm dia PVC Elbow

110mm dia PVC Bend

110mm dia PVC TEE

110mm dia PVC Y

160mm dia PVC Elbow

160mm dia PVC Bend

160mm dia PVC TEE

160mm dia PVC Y

Supplying, laying and jointing UPVC (Un-Plasticized Polyvinyl Chloride) Pipe and Specials Higher water presser of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing. and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. 25mm dia UPVC pipe

20mm dia UPVC Pipe

32mm dia UPVC Pipe

25mm dia UPVC Elbow

20mm dia UPVC Elbow

25mmx20mm dia reducer Elbow

32mmx25mm dia reducer Elbow

25mmx20mm dia reducer Tee

32mmx25mm dia reducer Tee

25mm dia UPVC Coupling

20mm dia UPVC Coupling

25mm dia Brass Ball valve

20mm dia Brass Ball valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) Long body tap

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Moulded Chamber Burnt Bricks of size 9" x 41/5" x 3"with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. CLEAR SIZE 0.60m X 0.60m

Supplying & fixing PVC pipes 63mm dia (having working pressure 4 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia etc., complete complying with standard specifications.

Supplying and fixing of gully trap of size 150mm x 100m with cast Iron Double Gratings approved quality and best variety conforming to BIS of the following dia etc., completed as directed by the departmental officers.

Providing expansion of joint using hot bitumen pad 12mm thick including labour chargers etc completed as directed by the departmental officers

Supply, Instalation & commisioning of fabricated / readymade MCCB type electrical distribution board (12 ways SP DB with IP 54 Protection) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 40 A DP - 1 Nos Outgoing 6 / 10A SP - 6 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board (4ways TPN DB with IP54 Protection) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ELCB shall have sensitivity of 100 MA Details of INCOMER : 63 A 4P MCB - 1 Nos Outgoing 10A SP MCB - 9 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board (6 ways TPN DB) Flush Type, Indoor enclosure ,hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100MA Details of INCOMER : 100 A DP-3 Nos Outgoing 10A SP - 9 Nos, 32 A SP - 4 Nos, 16 A SP - 3 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board ( 6 way Vertical Industrial Type TPMCB DB with IP54 Protection ) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 125 A 4P MCB- 1 Nos Outgoing 32A SP MCB - 3 Nos 63A TP MCB - 4 Nos.

Supply and Laying XLPE insulated outer and inner PVC sheath, 1100 V grade. armoured Copper conductor cable size of cable 31/2 x 50 sq mm.(EB to VDB)

Supply and Laying XLPE insulated outer and inner PVC sheath, 1100 V grade. armoured Copper conductor cable size of cable 4X6 sq mm.

Supply and run of 2 of 6 sq mm (84 / 0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection 2.5 sqmm (22 / 0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade and making good of the concealed portion with suitable colour

Supply and run of 2 of 4sq mm (84 / 0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection 2.5 sqmm (22 / 0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade and making good of the concealed portion with suitable colour

Supply & run of 2 of 2.5 sqmm (36 / 0.3) PVC insulated SC unsheathed cu. conductor of 1100 V grade in suitable PVC rigid pipe on conceled & ceiling with continuous earth wire connection of 1.5sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor of 1100 V grade and making good

Wiring with 2x1.5Sqmm. (22/0.3) PVC insulated unsheathed SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall & ceiling with PVC accessories with 1No. 1 Module metal flush type box with suitable cover plate and 1 No. 10A one way SP 1 Module switch in flush with wall for making good of the concealed portion with suitable colour for PVC concealed light point. (Box, cover plate and switch should be Legrand) (5 Points Per Coil)

Wiring with 2x1.5Sqmm. (22/0.3) PVC insulated unsheathed SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall & ceiling with PVC accessories with 1No. 1 Module metal flush type box with suitable cover plate and 1 No. 10A one way SP 1 Module switch in flush with wall for making good of the concealed portion with suitable colour for PVC concealed light point. (Box, cover plate and switch should be Legrand) (6 Points Per Coil)

Supplying and fixing of 60W High bay Fitting (Havells or Equivalent) including cost of material, labour etc.

Supply and fixing of 40W 2x2 Panel LED surface / Recessed Fitting(Oribit or Equivalent) complete with all accessories. The item includes supply of anchor fasterners for fixing & connecting with 1.5 sq.mmCu. Conductor wires for the light points as per Direction of the Federation Officers.

Supplying and fixing of 24W LED Fitting (Orbit or Equivalent) complete with all accessories. The item includes supply of anchor fasterners for fixing & connecting with 1.5 sq.mm Cu. Conductor wires for the light points as per Direction of the Federation Officers.

Supply and fixing of 11 W LED (Wipro/Orbit or Equivalent) Fittings as per Direction of the Fedration Officers

Supply and fixing of AC high speed Ceiling fan complete 1200 mm (48") with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Supply and fixing of 300mm sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supplying and fixing of Inverter Split AC (Daikin/Equivalent) 2.0 Tonnage Capacity 5 Star including cost and conveyance of all materials to site and labour charges for fixing in position etc complete as directed by the Departmental Officers.

Supply & fixing of 1 No. of 12 module metal flush type box with suitable cover plate comprising of 2 Nos. 6 A one way SP 1 module switch with 2Nos. 6A 2/3 pin combined socket shuttered in flush with wall with necessary connections (Box, cover plate and switch should be Legrand )

Supply & fixing of 1 No. of 9 module metal flush type box with suitable cover plate comprising of 2 Nos. 10 A one way SP 1 module switch with 2 Nos.10A 2/3 pin combined socket and 1 Nos. 16/20A one way SP 1 module switch with 2 Nos.10A 2/3 pin combined socket shuttered in flush with wall with necessary connections (Box, cover plate and switch should be Legrand )

Supply & fixing of 1 No. of 3 module metal flush type box with suitable cover plate comprising of 2 nos 10 A one way SP 1 Module Switch with 1 nos 20a one way DP 2 module Switch shuttered in flush with wall with necessary connections (Box, cover plate and switch should be Legrand )

Supply and fixing of 40W LED Street Light fittings (Havells/Equivalent) complete with copper choke and condensor with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads with MS clarnps and aluminium painting with fluorescent tubes

Supply and fixing of 25 A flush type wall socket with 25 A SP MCB in suitable sheet steel enclosure like Legrand / equivalent in flush with wall with earth connection.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.

P.Haridass