WBPWD/EE-II/CKHED/eNIT-57/ 24-25

Amount

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-11,15 ] Incoming - 415V, 25/35KA, 160A, FPMCCB (1 -nos) [ D-8,10 ] Outgoing - 10KA, (C-characteristics) 63A, TPMCB (4 -nos) [ D-7,8 ]

4 way [Legrand/LK/ABB/Simens]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for vertical enclosure (VTPN) with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [D-12,16]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator (1-nos) [D-5,6] Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB (12-nos) [D-6,7]

2+12 way [Legrand/LK/ABB/Simens]

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) following:

8"X10" comprising of 4 way 63 Amp. Capacity brass Stud/ terminal make- AC /DC. & 32 A FP MCB (L&T/Legrand) having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement, one NL on porcelain insulator etc. on wall as per direction of EIC.

8"X6" comprising of 2 way 32 Amp. Capacity brass Stud/ terminal make- AC /DC. & 20 A DP MCB (L&T/Legrand) having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement, one NL on porcelain insulator etc. on wall as per direction of EIC.

Supply & fixing 4 pole MCB SS enclosure with 1no. 415V 32 Amp 4-pole MCB to be fixed concealed in wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per direction of E.I.C (Make-Legrand/LK/ABB/Simens)

Supply and fixing of 220V, 600mm sweep, 110 CFM air delivery capacity full metal body, heavy duty wall air circulator fan (Make: Crompton greaves, Model: ACVORTEX24PF/ EPC/ ORIENT).

Supply & Fixing 240 V, 6A, plug socket (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-4/11a, 12b, E-5/15a)

Supply & Fixing 240 V, 6A, piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E-4/11a, 12b, E-5/14a)

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab) as mentioned below as approved by EIC.

a) 4 Core 70 sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [F-1,2(d) ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes,anticorrosive paste & jointing materials. [ F-5,8(b) ]

a) 4 Core 70 sqmm [ F-5,8(b,xvii) ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [ F-4,7 ]

a) 4 Core 70 sqmm [ F-4,7(c) ]

Supply and Fixing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire(RR Cable/Finolex/ Gloster/ Polycab/ KEI) as approved by EIC) of the following sizes in 20mm/25mm/32mm the PVC Rigid Conduit 'FR' [Make-Precision] on wall, ceilling with saddle and other accessories as required and mending good damages to building works.

4 x 6 sqmm + 2 x 4 sqmm ECC[ VPNDB to 3ph AC ] [ E-9,1(a1)& E-16,7(b) ]

3x1.5 sqmm ECC [E14/1(a)-i]

2x4 sqmm+1x 2.5 sqmm ECC [ E-9,1(v) & E-16,7(a) ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ]

4x6 sqmm+2x 4 sqmm ECC) [ VPNDB to 3ph AC ]

3x1.5 sqmm sqmm ECC

2x4 sqmm+1x 2.5 sqmm ECC [ F-5,9(ii&i)]

Supply & Fixing 240 V, 25 A, Modular type starter with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make:- Legrand/Cabtree) [E-19,17 ]

Supply & Fixing 240 V, 25 A, 5 pin Modular type plug socket without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make:- Legrand/Cabtree)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Norysis) & necy.Connections (E17/5(b)).

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (RR Cable/KEI/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching colour) top cover 3 mm thick and incl.175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS. [E-14,2 ]

Average run 8 mtr [E-14,2(c)]

On board [E-15,(a)]

Supplying & Delivery of fully diffused Recessed mounted 2'X2' LED Troffer with microprismatic diffuser suitable for LED Soft Glow High efficiency light fittings for OT,ITU,ICU, CCU ( Make-Philips Cat No- RC370B LED36S-6500 G5 L60 W60 PSU OD S1/ Similar wipro/Lighting solution).

Supply & Delivery of minimum 13 kW nominal cooling capacity ceiling suspended (concealed) medium static , Split Air conditioner with R 410A/ R 407C/ R 32 Refrigerant having single scroll compressor / swing compressor for inverter machine, suitabvle for operation on 415V, +_ 5%, 50Hz, 3Ph AC supply with precharged refrigerant , wired/ wireless remote , filter & all other accessories ( Make: DAIKIN, Model: FDMF 48 BRV 16, RZMF 48 BRV 16 Mitsubishi Heavy Industries, Similar model/ O General , similar model)

Supply & Delivery of minimum 7 kW nominal cooling capacity ceiling suspended (concealed) medium static , Split Air conditioner with R 410A/ R 407C/ R 32 Refrigerant having single Rotary compressor / swing compressor for inverter machine, suitabvle for operation on 240V, +_ 5%, 50Hz, 1Ph AC supply with precharged refrigerant , wired/ wireless remote , filter & all other accessories ( Make: DAIKIN, Model: FDBF 24 CRV 16, RGF 24 CRV 16/ Mitsubishi Heavy Industries, similar type model/ O General , similar type model)

Installation, testing & commissioning of above AC machines by fixing the indoor with two number 1.7 mtr long MS equal angle of sizes 40mm x 40mm x 6 mm to be fixed by welding in both end to the existing joist. The indoor unit suspended from the angle support with 4 nos 10 mm full threaded suspender bolt with double nut & spring washer. Outdoor unit will be fixed on wall witrh two nos 1.2 mtrs long MS C channel with size 80mm x 40mm x 6mm by one side grouted into the wall as per direction of EIC.

Supply and fixing of refrigerant Copper pipe line of following diameter for conecting Indoor and Outdoor unit for liquid and suction line with fittings, elbows, bends, supports & brackets along with the dnp resistant nitrile rubber insulation with double insulating wrapping tape to avoid driping of condensate water. (Make- Rajco/ Royku)

Suction Line 19.05 mm dia min. thikness 0.99 mm with 9 mm thick nitrile insulation.

Discharge Line 9.5 mm dia min. thikness 0.8 mm with 9 mm thick nitrile insulation.

Suction Line 15.88 mm dia min. thikness 0.99 mm with 9 mm thick nitrile insulation.

Discharge Line 6.35 mm dia min. thikness 0.8 mm with 9 mm thick nitrile insulation.

S & F 6 core 2.5 sq.mm copper cable for communication from Condensing Unit to control panel (Make: Polycab/RR Cable/Finolex/Havells)

S & F 4 core 2.5 sq.mm copper cable for communication from Condensing Unit to control panel (Make: polycab/RR Cable/finolex)

Supply and fixing flexible canvass connection for concealed split air-conditioners.

Supplying, fitting & fixing in position suspended boxing for return air arrangement & indoor units of concealed split airconditioner with frame work of aluminium hollow section of size 50mm x25mm (2.0mm thickness) combined with aluminium corners of size 38mm x 25mm, suspended by aluminium hollow tube section of size 38mm x 25mm ,25mm x 25mm powder coated wall angle with aluminium composite panel of thickness 3.0mm comprising of protective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealant including suitable arrangement for grill fixing complete in all respect as per direction of EIC.

charges for trap door of 1600 mm x 600 mm and 9 mm thickness made of aluminium channel & ACP sheet for IDU maintenance.

Supply and fixing of Al powder coated continuous Grill (Make- Premier)

S & L of Drain Water piping work out with 3mm thick / Schedule 40 UPVC pipe of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. (Make-Supreme/Finolex/Ashirvad)

25 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units upto 3rd floor.

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making platform for installation of outdoor unit of 4 TR Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. Structural design should be approved by E.I.C.

Cutting Iron window and Making door there for passege of outdoor maintenance.The charges of welder charges,mation charge, shifting, Fixing, labour charges and all material chips,Sand,Cement etc and mending good damages to original finish as per instruction of EIC.

Supply and delivery of lock(Make Godrej -7 lever) for locking the cutting window.

Rate is inclusive all taxes and cess

Defect Libility Period 1 year

M/s Singh Electrical Works (BID ID -5825805)

DECADON ENGINEERING (BID ID -5812052)