Repair to wall, Joinery, Flooring, Sanitary fittings, Plumbing works, Path, Plinth Protection, Plastering in various OTM Accn at Girdhar land at Mil Stn Jaisalmer

Amount

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames)not exc. 1.5 sq. m each and removing to store complete all as specified.

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing to store complete all as specified.

S&F 2nd class hardwood plain solid straight chowkat and frames wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed by Engineer-in-charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter for window, ventilator, etc. open nrebated and prepared to receive glass gauze etc (divided into panels with shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.2 (b) complete all as specified and directed by Engineer-in-charge.

S&F factory made 2nd class hardwood plain framed, panelled shutter 35 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood complete all as specified and directed by Engineer-in-charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified.

S&F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-charge.

S&F Butt hinges 75 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 150 mm size complete all as specified and directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 125 mm size complete all as specified and directed by Engineer-in-charge.

S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified

S&F 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed by Engineer-in-charge.

M&L for preparing of new wood surfaces and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Steel windows with side hung shutters uncluding projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.

S & F Steel windows with side hung shutters uncluding projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not other wise described, over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aserture 1.40mm and fixed with stainless steel note both to steel window/ventilator and wire staple complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aserture 1.40mm and fixed with stainless steel note both to steel window/ventilator and wire staple on wooden frame complete all as specified and directed by Engineer-in-charge.

S&F 3mm thick sheet glass ordinary qyality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bib taps fancy type cast copper alloy with crutch with butter fly handle, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-charge.

S&Fin repairs vitreous china squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs 10 litres cap PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified

S&F in repairs Vitreous China wash hand basin, white, flat back size 580x450 mm including brackets, complete all as specified

S&F 15 mm pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed, complete all as specified

Supply and fix in repair 15mm dia Stop valves/Angle cock,cast copper alloy fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified and directed by Engineer-in-charge.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed by Engineer-in-charge.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete ground floors and paving not exc 15 cm thick (below or above GL) complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M&L for PCC 1:2:4, 50mm thick using 20mm graded aggregate as in flooring complete all as specified and directed by Engineer-in-charge.

M& L for PCC 50mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight complete all as specified and directed by Engineer-in-charge.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed by Engineer-in-charge.

M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for pre-cast cement concrete block masonry with solid blocks, PCC Type C1 (1:3 :6) (20 mm graded aggregate) exc 10 cm in width and setting in CM 1:6 complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing complete all as specified and directed by Engineer-in-charge.

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and directed by Engineer-in-charge.

S & F 20mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified and directed by Engineer-in-charge.

S & F PVC (SWR) multi floor trap 75mm dia with grating including joint with solvent cement complete all as specified and directed by Engineer-in-charge.

S & F in repair chromium plated tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc complete all as specified and directed by Engineer-in-charge.

S&F in repair 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including dismantling of existing tank, all as specified in SSR Part-I.

S&F in repair 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including dismantling of existing tank, all as specified in SSR Part-I.

Disconnecting existing tanks exc 250 ltr and not exc 500 ltr capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed by Engineer-in-charge.

Disconnecting existing tanks exc 500 ltr and not exc 1000 ltr capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scale and dirt in tanks exc 250 ltr and not exc 500 ltr capacity , etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scale and dirt in tanks exc 500 ltr and not exc 1000 ltr capacity etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-charge.

S & F in repair 20mm bore dia ball brass valves high pressure ,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and as directed by Engr-in- Charge.

Taking down cement or cement lime plaster, any description on brick or stone surfaces of any position etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of stone wall or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of stone wall or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 10 mm thick plaster in cement mortar (1:3) mixed with WPC on concrete surfaces of roof top and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).

M & L for plastering 5mm in CM 1:4 on ceiling / chajja complete all as specified and directed.

M & L for two coats of cement base paint over a coat of cement primer on walls or newly plastered surfaces complete all as specified and directed by Engineer-in-charge.

M & L preparation of new plastered surfaces and applying three coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of destemper oil emulsion over a chalk whiting complete all as specified and directed by Engineer-in-charge.

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling including in narrow width, bands, cornices, pilasters etc., complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces and applying one coat of cement base paint on walls including in narrow width, bands, cornices, pilasters etc., complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing complete all as specified and directed by Engineer-in-charge.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using grey cement and pigment of any shape and size conforming to IS 15658 - 2006, complete. Note :- Pattern of tiles to be Rubber moulded or equivalent as approved by GE.

M & L 30mm sand cushion, filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-charge.

S & F Chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cemnt and pigments, set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge.

BHAGWATI CONSTRUCTION

M/S MAYA CONSTRUCTION COMPANY

Leelashah Enterprises

Dadhich Engineers

M/s Shri Inder Construction Company