REPAIR AND MAINTENANCE OF JOINERY AND MISC WORKS AT DALHOUSIE CANTT

Amount

Taking down chowkats or frames incl shutters (without taking off shutters from frame) n exc 1.5 Sqm

All as per item No 1 above but exc 1.5 sqm but n exc 4 sqm each

Taking down shutters of any description n exc 1 Sqm each

All as per item No 3 above but exc 1 sq.m and n exc 2 sq.m each

M&L resecuring or easing and adjusting of shutter, without takig down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each shutter complete all as specified

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

100mm size butt hinges medium weight colled rolled mild steel (ISI Marked)

All as per item 7 above but 75mm long.

S&f in repair galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

S&f galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

2nd class soft wood ( kail ) as in plain fillets, square rectangular or triangular in section fixed with screws exceeding 6 and nexc 13 sqcm wrought all as specified.

IInd class hard wood (Sal, Hollock) plain solid, straight, Chowkat and frames, wrought, framed, rebated on the solid , rounded or chamfered, put together with glue, pinned at joints all as specified

Flush shutters factory made, 30 mm thickness solid core construction, with block board core and ply wood face panels, commercial type on both sides

S & F factory made llnd class softwood plain, framed, panelled shutters (any nunmber of pannels), with pannels of timber flat on both sides, (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats, 30 mm thick battens{(Make : M/s Everest Trading Corpn, Damtal (H.P.), M/s Sarab Enterprises, Damtal (H.P.)}

IInd class factory made hard wood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass or gauze etc (divided into squares) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass as specified in SSR Part-I section 8.24 (a) supplied and fitted to chowkhats

IInd class factory made hard wood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass or gauze etc (without sash bar) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass,divided into squares with plain chamfered or rounded mitred and rebated sash bars with stiles and rails as specified in SSR Part-I section 8.24 (b) as in windows, ventilators.

S/F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed

S/F 100 mm long aluminium anodised barrel tower bolt of extruded section and fixed

M&L150 mm size Aluminium handle, cast type, anodised and fixed.

All as per item No 19 above but 100 mm size

S/F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed.

S & F 300mm, Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete supply & fixed

MS barrel tower bolts stove enameled black with bright bolt of size 200mm long (ISI marked)

MS barrel tower bolts stove enameled black with bright bolt of size 100mm long (ISI marked)

150mm Size MS pressed handle oval type stove enamelled black (ISI marked)

100mm Size MS pressed handle oval type stove enamelled black (ISI marked)

3mm thick plain sheet glass ordinary quality and glazing with oil putty or beading etc in square not exceeding 0.5 sqm in each pane

S&F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty or beading etc in square not exceeding 0.5 sqm in each pane

Two coat of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaces of any description over 10cm in width or girth not otherwise described including preparation

All as per item No 29 above but one coat synthetic enamel paint on old wdn surfaces

Block boards, grade 2 quality 18/19mm thickness inerior grade, commercial type, fixed with screws to timber frame work

M&L 18/19mm thick, prelaminated block board extirior grade decorative type with decorative face veneer on both side as in copboard & shelves.

S&F 40mm dia dia cupboard knobs fixed with nut, screw and washer of brass polished.

S&F harp & stable safets type brass with wild steel hinge pin include bolt to hinge plate and fixed with screws, 75mm.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening complete.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete.

M&L for in repair to aluminium door/window of any size/any description , taking off from present position and refixing in the same position after tightening , easing/change the section as required , including fitting the rubber packing aluminium snap beading resetting floor/hydraulic door closer/spring etc complete all as specified and directed.

S&F power coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass with and incl all fittings such as aluminum butthinges 100mm-2Nos, Aluminum handles 150mm-02Nos, Alu frame bolts 150mm- 02Nos, rubber -bedding/socket, glazing clips and one lock fourlever with duplicate keys of make Godrej or equivalent and 01 Nos hydrolic door glass etc complete including Taking down old Aluminium door shutter with chaukhat. (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc

M & L aluminum (excruded section) body door closer hydraulically regulated designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and weight between 35 to 60 Kg complete all as specified and directed.

S&F Aluminium powder coated three track sliding windows (with three sliding shutters, (One with stainless steel jally and two with glasspanes) aluminium sections not less than 1.1kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed incl 4mm thick tinted Glasspanes and stainless steel wire mesh.

S&F Aluminium ventilators powder coated with 4mm thick frosted glass louvers and incl 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of ventilator) all as specified and directed.

M/S WALIA ENGINEERS

M/s Shakti Electric Works

HARI OM ENTERPRISES

m/S Varun Gupta

malghotra construction co

Pathania Builders

M/s. Rishav Sood

Havish Construction