Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.2 LAdmitted-Finance | -23.24% | ₹3.2 L | L1 | Admitted-Finance |
Tender Value
₹4.2 L
EMD Value
₹8,500
Closing Date
19 Jan 2026, 5:30 pmClosed
EE Tawa Project Division Itarsi
EE Tawa Project Division Itarsi
Construction Of Boundary Wall At Office Of Superintending Engineer Tawa Project Circle Narmadapuram
2025_WRD_460376_1
2025_WRD_460376
Open Tender
Civil Works - Others
90 days
EE Tawa Project Division Itarsi
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
₹8,500
29 Jan 2026
9 Jan 2026
29 Jan 2026
9 Jan 2026
19 Jan 2026
12 Jan 2026
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil and all leads and lifts including cost of all materials and as per specification of MPPWD
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) and all leads and lifts including cost of all materials and as per specification of MPPWD
Providing and laying in position specified grade of reinforced cement concrete (nominal / design mix with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M 20 Nomial mix . and all leads and lifts including cost of all materials and as per specification of MPPWD
Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: M 20 –Grade Concrete and all leads and lifts including cost of all materials and as per specification of MPPWD
Centering and shuttering in cluding strutting, propping etc. and removal of form and all leads and lifts including cost of all materials and as per specification of MPPWDfor: Foundations, footings, bases of columns, etc. for concrete upto plinth level
Columns, Pillars, Piers, Abutments, Posts and Struts
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc complete Thermo-Mechanically Treated bars. FE 500 D or more conforming to IS 1786 and all leads and lifts including cost of all materials and as per specification of MPPWD
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002 i,n super structure aboveplinth level up to floor II level in 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) and all leads and lifts including cost of all materials and as per specification of MPPWD
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size).and all leads and lifts including cost of all materials and as per specification of MPPWD
12 mm cement plaster of mix : 1:6 (1 cement : 6 sand)and all leads and lifts including cost of all materials and as per specification of MPPWD
Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type Bincluding jointing withsealringonforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. 110 mm diameter (minimum wall thickness 3.2mm) And as per Specification of MPPWD
Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. and all leads and lifts including cost of all materials and as per specification of MPPWD
White washing with lime old work to give an even shade Two coats two or more coatsand all leads and lifts including cost of all materials and as per specification of MPPWD
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.07 MB
Td.pdf
Tender Documents • 7.40 MB
BOQ_557643.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid