Conservation and Facade Restoration of Heritage Precincts Zampa Precinct and Market Precinct and Upgradation of fruits and vegetable market with Defect and Maintenance Liability Period for Five Years Under SMART CITY MISSION at Diu UT Administration

Amount

DEMOLITION, SURFACE CLEANING AND APPEARANCE

Preparing surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleared surface with gunny bags to remove all loose dirt etf.,

Earthwork Excavation upto 1.5m depths including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift (A) Loose or soft soil

Demolition including stacking of serviceable material and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Rolling of eartrhwork in layers with power roller including filling in depressions which occur during the process

Preparing surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleared surface with gunney bags to remove all loose dirt etf.,

Watering of earth work over excavated surface and as per direction of Engineer-in-Charge

Careful removal of existing deteriorated/ damaged/ weathered lime plaster without damaging the surface below it as per direction of engineer-in-charge.

providing and Raking out joints of stone masonry surface to the required width and depth not less than 20 mm with due care and precaution by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints including disposal of rubbish to the dumping ground in all lead and lift.

CIVIL WORKS

Providing and laying plain cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,& having CBR 30% minimum, complete as per clause 401 as per direction of engineer-in-charge.

Providing and laying plain cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Applying priming coat over new / old steel and other metal surface after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. (for Market Jali)

Painting one coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (for Market Jali)

FAÇADE CLEANING AND STRUCTURE REPAIR WORKS

Steam Cleaning Providing for Steam cleaning process (Machine), with specified pressure and tempreture, so as not to damage or erode the parent surface of stone, plaster, brick etc. The steam cleaning should be done in expert supervision only. The direction of steam jet / nozzle should be pointed at an angle of 45-30 degree to the cleaning surface, never to be pointed at perpendicular to the surface as directed by Engineer-in- Charge:

Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure including Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding all as per direction of Engineerin- charge

Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineerin- charge (The rate is inclusive of all materials & labours involved except scaffolding).

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Providing and laying Precast Concrete grey rectangular Saucer Drain size of 600*300*100 with 0.4% water absorption as per direction of engineer-in-charge

Providng 30‐40mm lime plaster in two coats with 20mm base coat in lime mortar 1:1:1 (1 lime : 1Surkhi :1 Coarse Sand) and top coat in lime mortar 1:1:1 (1 lime : 1 Surkhi :1 Fine Sand) as per direction of engineer-in-charge.

Plastering of the dome in lime mortar 1:2:1 (1 Lime:2 coarse sand:1 surkhi ) up to 20mm thickness as per direction of engineer-in-charge.

Providing & Applying Lime Pointing (Raised pointing - false): Providing & Applying 6mm (or more - upto 8 mm) lime pointing on textured plaster walls using lime, fine sand, stone dust and adhesives as per traditional practice, mortar mix of 1:0.5:1 (1 lime, 0.5 stone dust, 1 fine sand) and appropriate adhesives i.e. shesh gunder syrup, methi powder, etc. as binders, insecticide and fungicide. Applying lime pointing incl. scaffolding, curing, consolidation, finishing complete with all materials, labour, tools and tackels.

Providing & Applying Lime Plaster Texture coat / Harling: Providing & Applying 8mm (or more - upto 12 mm) lime plaster (Texture Coar) on plastered walls using lime, fine sand, stone dust and adhesives as per traditional practice, mortar mix of 1:1:2 (1 lime,1 stone dust, 2 fine sand) and appropriate adhesives i.e. jaggery syrup, methi powder, yellow oxide, geru powder,etc. as binders, colour pigments, insecticide and fungicide. Applying lime plaster incl. scaffolding, curing, consolidation, finishing complete with all materials, labour, tools and tackels.

WOODEN ROOFING

Providing and fixing well seasoned Sal wood with wood preservetive full length new members like joists, rafters, purlins, etc.including all neccessary fixtures & fastenings and finish with oil based paint and complete as per the drawing, Items to include using a larger section of wood to get the mouldings and chamfers as per original design, sample to be shown to the Architect and Engineer-in-Charge for approval before fixing and the execution of the work as per the direction of E.I.C i) Wooden Rafter Beam 75mmx 150mm On wall, on both side In oil finihsed with All necessary fitting & fixture as per the drawing ii) Wooden Main Rafter 75mm x 200mm @ 800mm C/C In Oil finsihed with all necessary fitting and fixture as per the drawing iii) Wooden Ridge Beam 75mm x 200mm In Oil finsihed with all necessary fitting and fixture as per the drawing iv) Wooden plank of 25mm thick X 150mm width Cladding on Top of Main Rafer, In Oil Finished with all necessary Fitting & Fixture. as per the drawing v) Wooden Purline 50mmx75mm @300mm C/C with all fitting & fixture. as per the drawing vi) Wooden Purline 50 mmx 25 mm @1000mm C/C with all fitting & fixture.

Provding and fixing the Facia Eaves board on wooden sloping roof in a decorative manner made up 25 mm x 250 mm size of Teak wood including all neccessary fixtures & fastenings and finish with oil based paint and complete as per the drawing and as per the direction of Engineer-in-Charge.

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade on wooden surface as per direction of Enginner-in-Charge.

Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the embrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (i) 2mm (for corrugated roof sheets

Carefully removal and re-fixing on roof pressed clay tile of size 500 X 210 mm (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on wooden frame work complete (steel frame work to be paid separately).

Carefully removal and re-fixing on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on wooden frame work complete as per drawing and as per direction of Engineer- in-charge (steel frame work to be paid separately).

Providing & fixing on roof pressed clay tile of size 500 X 210 mm (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing and fixing 150mm wide 450mm over all semicirucular plain G.I sheet class-3 gutter with G.I brackets 40mm X 3mm size bolts, nuts, washersetc., including making necessary connection with rain water pipes. (i) 0.80mm thick sheet. (upto 10 ton)

WATER PROOFING ON WALLS

Providing and applying of Verona Vapour Permeable, water based Mature Lime wash finish of interior and exterior grade used for conservation and restoration of historical building, formulated by Mature Lime Putty with fillers by OIKOS India, After the cleaning of surface and removing any loose or flaking material, applied two coat of Verona Mature Lime wash finish by OIKOS India on one coat of Lime Based primer by OIKOS India of approved color and shade to achieve desired finish excluding the cost of surface preparation and scaffolding, apply by brush, roller and appropriate tools, as per manufacturer’s specification, all completes with the direction of Engineer-in-Charge.

Application of High quality Wacker SMK 1311 water base water repellent solvent free silicon coating impregnating on all Internal & external wall surfaces. The dilution of water should be done in ratio of 1:10 (1 Wacker : 10 water). The dilution should be applied in 2 more coats, wet on wet application to the surface. The application can be made through brush. The application should be done with prior preparation of surface by cleaning o it form residue of any material, dusting it clean for application.

FLOORING

Providing and fixing Stone roman mossaic tiles on finished floor surface of size 300 mm x 300 mm x (10-12) mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The mosaic tiles to be fixed on the floor surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing and laying polished Granite slab 25mm thk flooring/wall in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including Moulding & edge polishing wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge : Colour Jet Black or equivalent as per direction of engineer in charge

Providing and laying Leather Finish Granite slab flooring and wall skirting for all heights including wastage in required design and patterns, in linear as well as curvilinear portions as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge., 800X800, 25mm thick. Colour Jet Black, Light Grey, Steel grey or equivalent as per direction of engineer in charge

Providing and fixing 10x10x10 cm Rajula cobble stone flooring & edging machine cut and natural finish on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge..

Providing and fixing 10x10x10 cm Granite cobble stone block machine cut and natural finish on top, for paving in floors, drains etc. laid over 25 mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.

LANDSCAPING, SINAGES and OTHER WORKS

Hamelia patens Shrub: Supply, stacking and plantation of 0.6 mtr height, Girth thick of 10 to 18 mm. Soil to used will be garden soil (Well drained soil) and Fertilizer Organic Manure, Farm yard manure, fungicide, insecticide, pesticide and basal dose will be used as per direction of the engineer-in-charge.

Pongamia glabra (Karanj) plant: Supply, stacking and plantation of plant height 2.5 – 3 mtr height, Girth thick of 25 mm to 40 mm and in big poly bags of size 30 x 45 cm. Pit size 750mm X 750mm X 750mm. Soil to used will be garden soil (Well drained soil) and Fertilizer Organic Manure, Farm yard manure, Insecticide, Pesticide & fungicide will be used as per direction of the engineer-in-charge.

Planter Bed ; Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

SLOPING GRASS MOUNDS Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) bedding of average 1” thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, cleaning etc. complete at all levels and heights. complete as per direction of Engineer-in-Charge.

Supply, stacking and laying of 0.06 to 0.09 mtr height Local Lawn / Grass over the soil filling for sloping grass mounds as given in the drawing and as per direction of engineer-in-charge.

Providing and installing signage of size 1000mmx1500mmx75mm including transportion of the material, 4 mm thk. sturdy metal frame and matte finish aluminium sheet in dark grey colour around entire frame, and pictures and text printed on surface in white colour as per specification mentioned in the drawing including with civil work (excavation & PCC) and as per direction of engineer-in-charge.

Providing and fixing Garden wooden bench with back and arm rest, designed as per modern appearence accodmodating 3-4 people requires low maintanance as per Architecture drawing including fixing, cleaning surfaces and cost of loding -unloading and placing with crane. (Brands AryaPrecast, TDW or equivalent) as per direction of engineer-in-charge

Providing, fabricating and erecting Arches with 6mm thick A grade Corten steel sheets fixed to the existing Market structure with required shape,size and profile,. including cost of material, insert plates, fasteners, fabricating, jointing, welding, threading, transportation to final worksite, erection in position etc. complete with all leads as per drawings & specifications and approval of architect & engineer-in-charge.

Providing,fixing and erecting the high strength, durable and corrosion resistance ,MS Racks along with non toxic finish including bolts and nuts, painting as per drawing and direction of engineer-in-charge.

White Stone Bela masonry block in course in superstructure with stone of approved qualtiy in lime mortar 1:1.5 (1 Lime putty : 1.5 Finesand ) including packing the joints etc, complete

Providng, fixing and erecting High quality canvas fabric of minimum 200 GSM with super durability and resistance to fire & water of required colour and shade having width of 72 inch (1.83 m approx) and size complete with all the necessary fittings and fixtures as per the architectural drawings and as directed by engineer in charge. (Overlapped of cloth shall not be paid extra in any direction)

Providing, fabricating and erecting of Mild Steel Galvanized iron box extruded tubular and other sections as per the architectural drawings and approved shop drawings , the GI coating on mild steel quality as per IS code 4736:1986, the rates shall including the cost of base plate & super durable powder coated 45-55 microns in light grey colour and other shades as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. and other necessary fittings). Nothing extra shall be paid on this account). The weight of GI extruded section shall be taken for purpose of payment.

PAINTING WORKS

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two leveled and finished even and smooth in (iii) cement mortar 1:6 (1 Cement, 6 Mortar)

Applying two coats of Birla (White cement based) or Asian ( arcylic lapy-putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

STORM WATER DRAIN

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 m lead for all kinds of soil

Providing and laying cement concrete (M10) 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying in position Ready Mixed M250 Grade concrete for reinforced cement concrete work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10Kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability, including placing of PVC sleeves during casting as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg )

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing Thermo-Mechanically Treated bars of grade Fe-500D steel reinforcement for R.C.C work at all levels and providing anticorrosive treatment to the bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993. The cost is inclusive of straightening, cutting, bending, placing in position and binding all complete.

Supply, delivery and fixing of Precast R.C.C. horizontal grating with frame of size 500x450 mm accurately designed molds and are suitably reinforced to enable the covers to take load of 20 MT for Heavy Duty as per direction of engineer-in-charge

Electrical Works

Post Top Lights (PT-45W) a) Model number of 60-9913-Z5-CL Appliance in die-casting aluminium (UNI EN 1706).PMMA Frosted basket screen (GHIT - IK06). Tilting frame for access to the electric and optical auxiliary compartment.Support plates for LED module and wiring easily removables.Wattage 45W,CRI 70,Real Lumen - 4500Lm 100Lm/W,Colour Temp 3000k,Beam Angle type II,IP / IK Protection IP66,Brand of Neri Lighting,product code Light 801PN801 19 1/2 02,PROUD Streetlight head Light source: LED EDISONOutput (W): 40 WTotal power consumption (W): 44.9 WColor temperature: Warm White - 3000KCRI: 80Real Lumen: 3110Nominal Lumen: 5080Qty Leds: 342Lm/Real W: 69Life Time: 59.000h L70B30Bin / Grup: 303MacAdam steps: 2 STEPSUGR: 21.2Photobiological risk: RG0 IP65 IK10

ARCHITECTURAL POST TOP POLE :JM.06.18.010/ DW WINDSOR/GHM 3.5M height Pole made of mild steel pipe sections 114mm dia. & 76mm dia. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260 dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as approved by the econerned Engineer the total height of decorative cast iron base is 700mm and weight-32kgs.Decorative Top ring(weight-3kgs.) made of cast iron as well. All cast iron parts weight mentioned are with +/5% tolerance.Entire pole shall be made to provide pleasing aesthetics as approved. c) Errection charges for one light and pole including of labour cost

RG1 (Recessed Inground Column Up Light) Floor recessed for outdoor use. For uplighting. Electronic components are in a sealed internal compartment, completely separate from the compartment where the connection terminals are located. The unit will withstand a static weight of 1,800 Kg and the occasional transit of slow-moving vehicles. Includes flushmounting box. Suitable for installation in marine environments. Includes 2 cable outlets to facilitate chain mounting. Adjustable light source. Structure material: Stainless steel AISI316, Aluminium. Structure finish: Polished, Black. Diffuser material: Glass. Diffuser finish: Transparent. UV ,protection. Ta max: 50ºC,wattage is 19.5W,CRI 80,Real Lumen -1636Lm,Colour Temp-3000K,ip protection IP67,brand of Ledsc4 Lighting,product code of GEA Power Led Pro Uplight recessed 55-9968-CA-CL.GEA Power Led Pro Uplight recessed Light source: LED CREEOutput (W): 16WTotal power consumption (W): 19.5Color temperature: Neutral white -4000KCRI: 80Real Lumen: 1636Qty Leds: 6Lm/Real W: 84Life Time: 50.000h L90B10Bin / Grup: 5A3 o 5D2MacAdam steps: 2UGR: 9.7Photobiological risk: RG2 IP65/IP67 IK10 10º inlcuding electrician charges.

Recessed Inground Diffused Light (RG-11W) Recessed Inground Column Up Light-GEA Power Led Uplight recessed Light source: LED LUMILEDSOutput (W): 9WTotal power consumption (W): 11WColor temperature: Warm White - 3000KCRI: 85Real Lumen: 796Nominal Lumen: 873Qty Leds: 9Lm/Real W: 72Life Time: 50.000h L70B30Bin / Grup: POMacAdam steps: 3 STEPSUGR: 11.0Photobiological risk: RG0 IP67 IK10 16º,model number of 55-9665-CA-CL. including electrical wiremen charge to fix the light

Recessed Inground Column Up Light (RG4-43.6W) Model number of 55-9981-CA-CL Floor recessed. For uplighting. Electronic components are in a sealed internal compartment, completely separate from the compartment where the connection terminals are located. The unit will withstand a static weight of 1,800 Kg and the occasional transit of slowmoving vehicles. Includes flush-mounting box. Suitable for installation in marine environments. Includes 2 cable outlets to facilitate chain mounting. Cable meters included: 2.5. Adjustable light source. Structure material: Stainless steel AISI316, High purity aluminium. Structure finish: Polished, Black. Diffuser material: Glass. Diffuser finish: Tempered. UV protectionGEA Power Led Pro Uplight recessed Light source: LED CREEOutput (W): 37.9WTotal power consumption (W): 43.6 WColor temperature: Warm White - 3000KCRI: 80Real Lumen: 3120Qty Leds: 15Lm/Real W: 72Life Time: 50.000h L90B10Bin / Grup: 7C1 o 7B4MacAdam steps: 2UGR: 18.0Photobiological risk: RG2 IP65/IP67 IK10 61º including electrician charges to fix the one light.

Wall Garzing to illuminate the cross-(WL/28W) LED strip for indoor use.For uplighting. Aluminium profile and silicone diffuser included. Structure material: Aluminium. Structurefinish: Matt. Diffuser material: Polycarbonate. Diffuser finish: Transparentº.ION Led strip Light source: LED HONGLITRONICOutput (W): 28WColor temperature: Warm White - 3000KCRI: 80Real Lumen: 1878Qty Leds: 120Lm/Real W: 67Life Time: 50.000h L70B30Bin / Grup: Y3 o Y5MacAdam steps: 3UGR: 25.7Photobiological risk: RG0 IP68 (1m) IK08 120º including electrician charges

Surface Mounted Downlight (SC-11W) - Stylish adjustable projector range. Naturally beautiful and unique contemporary family, ODESSA packs a punch with an abundance of options and accessories. Die-cast aluminium housing pre-treated before powder coating ensuring high corrosion resistance.Single cable entry.Through wiring on request for OD-50011, OD-50012. Stainless steel fasteners in grade 316wattage of 11Watts LED,CRI 80,Real Lumen - 816Lm,color temperature of 3000K,beam angle is 47°,IP protection is IP66,Brand of Ligman Lighting,Product code is ODESSA 1 OD-50002. including electrician charges to fix the one light

HDPE Conduit Pipe for Cable Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original.

Lighting panel which contains the 1no of 80A 3pole MCCB and one contactor of 80A ,one chronological timer to ON /OFF the Street lights autonatically - Supply and fabrication of the lighting panel along with the transportation charge including Erection or fixing of the Lighting Panel charges

TPN 6- 32Amps 10ka MCB of Cat no DHMJDFPF006

Distribution Box for lighting TPN Metalica Distribution Board for lighting with 4way model number of DHDNTHODAW04,HSN Code - 8537,IP65 including Erection or fixing of the Lighting Panel charges

4C X 6sq.mm PVC copper cable (PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988) Supply of 6 Sqmm 4 Core PVC insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) Makes: KEC / FINOLEX / Unicab / Havells / KEI / Polycab including Labour charges for laying

4C X 6sq.mm PVC copper cable (PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988) Supply of 1.5 Sqmm 3 Core PVC insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) Makes: KEC / FINOLEX / Unicab / Havells / KEI / Polycab including Labour charges for laying

Cable Gland for 4C X 6 sqmm PVC CU armoured cable Supply and Fixing of single compression brass cable glands for 4core PVC armoured Copper cable from 6 Sqmm with brass washers complete, Make (Comet / Electromac) including Cable lugging Charges

Copper LUGS FOR 4C X 6 mm sq. mm CABLE Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable of 6 sqmm including nuts and bolts with connections including Cable Lugging Charges

Point Wiring for 6/16Amps Socket and switch Point wiring for Individual Plug with & earthwire of 2.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [III] For 16A Plug with 2-4 sq.mm Cu. Wire Cat. II

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge 16 Amp. SP one way switch Cat.III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge 6/16Amp. Universal socket Cat.III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 core 70 Sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Supplying and fixing of the ABS Enclosure Size 100X100X70 MM with 6 Aq.mm Terminal

Akshar Shilp