COMPREHENSIVE MAINT INCL E/M MAINTENANCE IN MD AND OTM ACCN IN ZONE A AT MIL STN GAYA

Amount

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one way switch 5 Amps

(b) One exhaust fan/ceiling fan point controlled by one, one way switch 5 Amps

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(e) One bell point controlled by one switch

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable with casing caping as surface to match with existing finish complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 4 here-in-before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F modular switch piano flush type, single pole, one way and 5/6 Amp single module complete.

S & F modular switch piano flush type, single pole, one way and 15/16 Amp single module complete.

S & F modular socket outlet multipurpose with provision of 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete.

S & F modular socket outlet multipurpose with provision of 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete.

S & F modular switch piano bell push type, single pole, one way and 5/6 Amp single module complete.

S & F ding dong buzzer call bell complete all as specified and directed .

S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

S & F modular white cover plate with frame 3 module

S & F modular white cover plate with frame 6/8 module

S & F modular metal flush box for 3 module

S & F modular metal flush box for 6/8 module

M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps suitable for MCCB 125 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

Supply and fix 4 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

Re-fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories complete all as specified and directed.

Re-fixing of xhaust fan of 250 mm sweep made of plastic/steel body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.

Re-fixing of geyser with haul & fastnut and all accessories complete all as specified and directed.

S & F in replacement LED lights fitting 1x 20W 220V, polycarbonate LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and directed.

S&F in replacement of LED panel light fitting 36 watt LED (2x2 ft), LED panel fitting, including LED in white 230 volt energy saving environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC housing in opal finish suitable for wet location with brighness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10mm thick internal surfaces walls on fair faces of brick work or concrete in cm 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick external surfaces on brick/concrete walls in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement complete all as specified and directed Note:-WPC measured and paid separatly

Supply only integral water proofing compound of approved brand/make.complete all as specified and directed

M&L preparing Old plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed.

M&L preparing Old plastered surfaces of Ceiling and applying complete wall with 1.0 mm thick putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

M&L preparing newly plastered surfaces of Ceiling and applying complete wall with 1.0 mm thick putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

Preparing Old plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed

Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed

Dismantling stone slab of any description laid beddded & pointed in any mortar complete specified and directed complete all as specified and directed

M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for glazed ceramic coloured tiles in verticle surface 450mmx350mmx7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE.

Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 (20mm graded ) type B0 in levelling course of floor complete all as specified and directed

M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid floor/skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in C:M 1:4 etc. complete all as specified and directed. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE.

S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in C:M 1:4 complete all as specified and directed by engr in charge complete all as specified and directed. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed

M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc complete all as specified and directed

M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

S&F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in walls of 110 mm bore of pipe etc complete.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in walls of 75 mm bore of pipe etc complete all as specified and directed

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed

PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement complete all as specified and directed

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and

S & F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S &F in repair chromium plated Shower rose 15 mm size, 125mm long with arms complete all as specified and directed

S&F in repair vitreous china wash basin , white , flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling complete all as specified and directed

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover etc complete all as specified and directed

S&F in repairs vitreous china Orissa pattern size 580mm x440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rest any pattern complete all as specified and directed

S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F in repair 20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed

Disconnecting existing tanks exc 250ltr but n exc 500ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed

Disconnecting existing tanks exc 500ltr but n exc 1000ltrsetting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed

S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F tubular towel ring 165mm external dia complete all as specified and directed

S& F in repairs PVC ( SWR ) nahani ntrap / floor trap with grating 75 mm dia complete all as specified and directed

S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repair brass CP wall/basin mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe ,complete all as specified and directed

S&Fin repairs PVC waste pipe size 32 mm X 800 mm flexible with coupling for Urinal/wash basin etc. complete all as specified and directed

S & F in repair of white seat cover for pedestal pattern water closet including fixing bolts complete all as specified and directed

S & F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

Taking down of existing GI Tubing 15 mm dia complete all as specified and directed

Taking down of existing GI Tubing 20 mm dia complete all as specified and directed

Supplying and laying as in repair of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/floors complete all as specified and directed.

Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/floors complete all as specified and directed

S & F of CPVC pipes MBTA/FBTA fittings such as tee, elbow, socket and Tank union etc of 16 mm outer dia complete all as specified and directed

S & F as in repair of CPVC pipes MBTA/FBTA fittings such as tee, elbow and socket etc of 20mm outer dia complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed

Taking down chowket or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed

Taking down re-fixing Shutters of any description but exc 1 sq. m and n exc 2 sq. m each in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates complete all as specified and directed

M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed

M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed

M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed

M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete all as specified and directed

S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc complete all as specified and directed

S&F 200mm long aluminium anodised barrel tower bolt and fixed complete all as specified and directed

S&F 150mm long aluminium anodised handle cast type and fixed D Type complete all as specified and directed

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed

S & F Powder coated aluminium frame/shutters for doors, windows, ventilators sliding/openable etc with joining cleat for fixing, locking arrangement, rubber beading, screws, etc including taking down and making the surface good complete all as specified and directed Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed

M&L for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified and directed

S&F 5mm thick tinted glass in aluminium doors & windows with rubber packing including hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed

Taking down existing aluminium doors/windows and re-fixing after tightening loose screw including replacement of unserviceable screw, aluminium beading, rubber packing (including taking down carefully glass panels & re-fixing the same and other hardware fitting such as hinges, tower bolt , handle etc complete all as specified and directed by engr in charge. (Note:- floor door spring, mortice lock,tinted glass will be measured and paid saperatly).

S&F in repairs aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 yo 80 kg snf complete all as specified and directed

S&F in repair mortice lock vertical type & 4- levers of 100mm brass body with two keys complete all as specified and directed

M&L for welding in repairs n. exceeding 2.50cm in length thickness of metal to be welded n.exc 9mm complete all as specified and directed

M&L for welding in repairs exceeding 2.50cm but n.exceeding 5 CM in length thickness of metal to be welded n.exc 9mm complete all as specified and directed by engr in charge.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame complete all as specified and directed

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed

S&F 125mm long aluminium anodised handle cast type and fixed D Type complete all as specified and directed

Supply & fixing in repairs 300 mm,Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.

Dismantling of wall and ceiling boards, any thickness including cover fillets complete all as specified and directed

S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed

S&F 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system complete all as specified and directed

M&L for 50 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair complete all as specified and directed

M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M & L for providing cement concrete cas in situ 1:2:4, type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed

M&L for Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) 75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 38 mm wide inserted in position complete all as specified and directed

UMESH SINGH (BID ID -3437823)

MS HARI MOHAN GUPTA (BID ID -3441208)

MAA BHAGWATI TELECOM LINK (BID ID -3443955)

M/S ABHAY KUMAR AND BROTHERS (BID ID -3438729)