SPL REPAIR TO CERTAIN BLDGS INCLUDING ROOF TREATMENT, PLASTER, WIRING AND EXTERNAL PAINTING AT BMH LINE, AT DRC AND IN RECORDS UNDER AGE (I) AYODHYA CANTT

Amount

Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering complete all as speciifed and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

Cutting chases in brick walls , pinning in, making good to facings where required and pointing in CM 1 : 3 to ends, or edges of landings steps,cills, and cutting chases for concealed water tubing or conduit wiring etc and making good cutting excedding 20 cm girth complete all as specified and directed and directed.

Dismantling of framed work timber scantling 40 sqcm and over in section and in any position complete all as specified and directed.

M&L steel work in tubular trusses/Column, railing, grills etc including special shaped washer etc complete using ERW or induction butt welded tube complete all as specified and directed.

M&L preparation of newly untreated steel surface over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets all as specified and directed.

S&F powder coated Anodised aluminium snap grid frame work for false ceiling of grid size 605x605mm complete all as specified and directed by Engr-in -Charge.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm long of grid size 605x605mm complete all as specified.

S&F 4 mm thick high pressure steam cured Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish of the premises all as specified and directed.

M&L for glazed ceramic coloured tiled in vertical surfaces such as skirting / dado 450x350x7mm / 350x250x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cm 1:4 on verticle surfaces of wall for fixing of wall tiles all as specified and directed. Note :- Colour and design approved by Engineer-in-Charge.

M&L for light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar (1:6) 15mm thick for laying floor finises of tiles all as specified and directed by Engr-in-charge. Note :- Colour and design approved by Engineer-in-Charge.

M&L for Vitrified double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.

M&L 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including screed bed 15mm thick CM 1:4 complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as spd & directed.

Refixing shutter in same opening after resecuring or easing & adjusting of any description exc 1 sqm but n exc 2 sqm each complete all as specified

M&L for Complete removal of existing treatment of plastered surfaces of wall and providing wall care putty minimum 1.5 mm thick, preparation of surface with priming paint and applying two coats of distemper oil emulsion, complete all as specified and as directed.

Material and labour for complete removal of existing old treatment of wall and applying 1.50mm thick wall care putty and two coat of weather proof exterior emulision(APEX of Asain paint or equivalent) all as specified and directed.

Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc.complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement and including mixing with WPC @ 3% total weight of cement, complete all as specified and directed. Note: WPC should be measured & paid Separately.

M&L for Preparing newly plastered surfaces of walls and applying two coats of Acrylic smooth exterior paint of required shade @ 1.67ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10Sqm complete all as specified and directed.

Supply only integral WPC ( Integral waterproofing compound all as specified and directed..

M&L 10 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 as in internal walls to be finished even and smooth without using extra cement, complete all as specified and directed. .

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer on walls over & including a coat of 1mm thick wall care putty, complete all as specified and directed. Note :Approval in token satisfaction of Engineer-Incharge shall be obtained by contractor before applying finish work.

Dismantling of existing unserviceable water tank of any description, capacity exc 250 Ltr but n. exc 500 ltr and S& F rotational moulded synthetic (HDPE) water storage tank 500 litre capacity triple layer, hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size, hoisted & fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F in repair of 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 25 mm gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all specified and directed

S&F new 15 mm dia bore galvanised steel tubing with all fittings,medium weight ISI marked fixed to wall ,ceiling or laid in floors complete all as specified and directed.

S&F new 20 mm dia bore galvanised steel tubing with all fittings,medium weight ISI marked fixed to wall ,ceiling or laid in floors complete all as specified and directed.

S&F new 25 mm dia bore galvanised steel tubing with all fittings,medium weight ISI marked fixed to wall ,ceiling or laid in floors complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.

Taking down chowkats with shutters exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.

Supply and fixing factory made UPVC white colour three track panels sliding window with fly proof S.S wire mesh (Two Nos. glazed & one No. wire mesh panels) upto 1.50m height made of frame 110x 45mm & sash 40 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of approproate dimension comprising of UPVC multi chambered frame. with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galanized mild steelsectin made form roll forming process of required length ( shape & size according to UPVC profile) , appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearin capacity to be 40 kg) G.I fasteners 100x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixong hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality. complete all as specified and directed by Engineer- in Charge complte all as specified and directed. Note -1. Glazed shutters float glass thickness not less than 5.00 mm and wiremes shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note :- Approved by Engineer-in-Charge.

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both havingwall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note :- Approved by Engineer-in-Charge.

M&L for 4.0mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F pressed steel frames for door of size 125x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick plate etc complete, as specified and firected.

S&F pressed steel frames for door of size 105mmX60mm with one or more rebates including necessary lugs,hinges,locks stricks plates etc complete all as specified and directed

Material & Labour for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in bed block, filling of pressed steel frame complete all as specified and as directed.

M&L for cutting holes in PCC block walls built in cement mortar exc half brick but n exc one brick, for inserting hold fasts or lugs and making good dismanteled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required all as specified and as directed.

S&F bands, straps, supports or stays for rainwater , clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts and similar small articles conforming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F for 2nd class H/W panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides factory made (feathers edged) or 12mm venerred particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick glazed and skelton factory made shutter(wihout sash bars) open rebated to received gauze etc fitted with cut and mitred beads for securing gauze as specified in SSR Part-I Section-8, clause 8.24(a) and fixed to frame complete all as specified and as directed..

Supply & fix galvanished mild steel wire cloth 0.56mm nominal dia and 1.18 mm average width of apperatures all as specified and directed.

S&F for butt hinges 100 mm long meduim weight extruded aluminium alloy anodised and fixed,(ISI Marked) complete all as specified and as directed..

S&F aluminum anodised barrel tower bolt 150mm long of extructed section complete all as specified and as directed..

S&F in reapir Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and directed by Engr-in-charge.

S&F aluminum anodised handle cast type 150 mm, anodised complete all as specified and as directed.

S&F aluminum alloys anodised sliding door bolt with hasp, staples 300mm (Bolt type) and fixing clip of sheet cast or extructed section and fixing bolt and sliding bolt of extructed section or cast aluminum alloys and fixed, complete all as specified and as directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor all as specified and directed.

M&L for preparation of new wooden surfaces over 10 cm width of girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even and fair, complete all as specified and as directed. Note-Plinth protection will be laid in outward slope of 1in 12 and in alternative bays/panel.L ength of panel shall not exceed 2.5 m and joint between two panel shall be filled with mastic filling comrimising mixture of one part of hot blown bitumen 85/25 penetration and two part of heated sand.

Supply & Fixing in repair vitreous china wash hand basin, white, flat back, size 550 X 400 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and 32 mm bore dia waste coupling of PTMT (half or full thread) min weight 32mm-45 Gms/40mm-60Gms) complete all as specified and directed.

Supply & Fixing in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hotor cold' with long screwed shank and fly nuts screw for iron pipe all as specified and directed.

Supply & Fixing in repair 15mm Bore bib tap cast copper alloy chromium plated fancy type with crunch or butterfly handle screw down scrwed for iron piupe or for brass funnel and fixed, in repair complete all as specified and as directed.

Supply & Fixing 15mm Bore PTMT angle stop valve any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply & Fixing in repairs PVC connection 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S&F in repairs 25 mm dia stainless steel curtain rods with decorative end knobs and bracket complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed.

Demolition of reinforced concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc in any position all as specified and directed.

M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick for rough finished surface of concrete, complete all as specified and directed.

M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qual al as specified and directed.

Supply & fixing in repair galvanished mild steel wire cloth fixed 0.56mm nominal dia and 1.18 mm average width of apperatures all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

Supply & Fix 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, , laid in trenches or in floors including all fittings and fixed with clamp all as specified & directed.

Supply & Fix 110mm bore PVC (SWR) bends any radius all as specified & directed.

Supply & Fix 110mm bore PVC (SWR) branch pieces, single 'Y'/'T', equal or unequal all as specified & directed.

M&L for PCC type B-2 (1:2:4) (using 40mm graded crushed stone aggregate) as in surface channels and drains etc., complete all as specified.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness below (below or above gound level) complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregat) as sub base floor complete all as specified and as directed.

Sand filling under & packing side of interlocking tile including watering & consolidation, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles and including 15mm thick CM 1:6 complete all as specified and directed.

S&F Solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed.Make: Rajshree plasticwood/Sintex or equivalent as approved by AGE(I)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of Ms tubes for top and bottom rails,.MS frame shall be covered with heat moulded plain colour PVC C channel having PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour pvc sheets for top rail lock rail and bottom rail .Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading,and joined together with solvent cement supping and fixing in the frame at site as per specification.Make:Rajshree Plasticwood/Sintex or equivalent as approved by GE/AGE(I)

M&L 40 mm thick flush shutter solid core construction with block board core and plywood face pannel commercial type on both sides complete all as spcd and directed by Engineer in charge

M&L 5 mm thick rendering on fair faces of concrete surface with CM 1:3 in ceiling to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L Preparing old decorated surfaces of ceilings and applying two coats of white wash, complete all as specified and directed.

M&L Preparing old decorated surfaces of walls and applying one coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of acrylic smooth exterior paint of required shade @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20kg/10sqm), complete all as specified and directed

M&L PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate in surface channels and drains etc., complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded crushed stone aggregate as in flooring for levelling coarse etc., complete all as specified and directed.

M&L for applying one coat of industrial bitumen 85/25 at rate 1.2 Kg/Sqm including cleaning for sunken floor etc complete all as specified and as directed.

S&F Viterous China wash down closet pan (pedestal pattern)white (Excluding flushiung cistern and flush pipe) and including seat cover complete all as specified

S&F in repairs vitreous china urinal bowl type of size 465X355X265 white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union for dischargemm-45 Gms/40mm-60Gms)(excluding flushing cistern and flush pipe)

M&L PVC (SWR) floor trap,plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair looking mirror 5 to 6 mm thick fixed on 8mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook (shade as approved by GE) complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 liters low level white with inlet ball valve float and handle including brakets complete as specified and directed.

S&F in repair 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F in repair 75 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F110mm bore PVC (SWR) branch pipe, single Y equal or unequal with access door complete all as specified.

S&F75mm bore PVC (SWR) branch pipe, single Y equal or unequal with access door complete all as specified.

Supply & Fix 75mm bore PVC (SWR) bends any radius all as specified & directed.

Taking up or down steel tubing and connection of15 mm bore including cleaning for refixing or removal to store 15mm bore pipe. complete all as specified.

All as per srl item No. 106 above but 20 mm bore

All as per srl item No. 106 above but 25 mm bore

Fixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc. Including Taking up or down steel tubing and connection complete as specified and directed.

All as per srl item No. 108 above but 20 mm bore

All as per srl item No. 109 above but 25 mm bore

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down both ends for iron pipe or for union 20mm dia, ISI marked complete all as spd & directed.

S&F in repairs gun metal globe or gate valve with iron wheel headed, screwed both ends for iron pipe or for union 20mm dia, ISI marked complete all as spd & directed.

S&F in repairs 15mm bore stop valves cast copper chromium plated fancy type, screwed down high pressure with screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified

S&F powder coated anodised aluminium window and ventilator shutter fixed type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips,rubber packing ,anodised aluminium snap beading ,screw etc complete all as specified

S&F powder coated aluminium (min thickness of powder coating 50 micron) for shutter of door ,window & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings where required including the cost of EPDM rubber/neoprene gaskets required.(Fitting shall be paid seperately ) with extruded builtup standard tubular sections/appropriate Z sections and other section of approved make confirming to IS:733 and IS: 1285 fixing with dash fasteners of required dia and size including necessary filling up gaps at junction i,e at top,bottom and side with required EPDM rubber/neoprene gasket etc Aluminium sections shall be smooth ,rust free ,straight,mitred and jointed mechanically where required including cleat angle,aluminium snap beading for glazing /paneling C.P. brass/stainless stell screws all complete as per architectural drawing and the directions of Enginer-in-chief

S&F framed work such as grills,grating etc with ends of bars shouldered and/or riveted or forged into spikes ,framed gaured bars, barred iron doors,ladders,framed balusters,walkways,railings,framework of watertank and similar work conforming to Fe 290 Gde-E-165, complete as specified and directed.

S&F sheet glass 4.8 mm thick,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each plane, complete as specified and directed.

S&F 3 mm thick frosted glass fixed with oil putty in square nexc 0.5 sqm in each pane, completed all specified and directed

M&L brick work with sub class B bricks,straight or curved on plan to any radius in half brick thick wall built in 1:4 cement mortar, complete as specified and directed.

S&F 40mm low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm^2 fixed complete to walls,ceilings or in floor etc., complete as specified and directed.

S&F in repair Aluminium handles extruded type ,anodised of 150 mm size complete all as specified and directed by Engr-in-charge.

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints any size, including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge

S&F PTMT Grating round 140 mm size (min weight 50 gms) complete all as specified

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F butt hinges medium weight cold rolled mild steel of size 100 mm and fixed complete all as specified and directed

S&F in repair Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20 meter(approx) long flexible tube and ABS wall hook including making connection and fixed in position complete as specified and directed. Make : Jaquar cat Part No. ALD 573 or equivalent cart part of make as specified in list of make here-in-after.

Dismantling brick tiles any size laid bedded and pointed in any mortor, complete as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone agg) in roof padding finishing the surface fair & even, complete as specified and directed.

M&L for preparation of newly plastered surface of roof including cleaning the surface by using wire brush/ pressure hose and applying high performance polyurethane liquid membrane roof casting cold applied in two coats @ 1.5 Kg/Sqm applied with spray/brush an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60as ASTM D 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions and sound engineering practice complete all as specified and directed.

M&L screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound ( WPC to be measured and paid separately) as per manufacturer’s instructions finished even & fair complete as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete as specified and directed.

M&L for green Marble work 15 to 18 mm thick (table rubbed and polished) in steps,riser jambs, pillars, windowcills,cooking platforms and like in & including screed bed 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed .

Supply only Liquid water proofing compound of approved make.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over & including a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

Preparation of old steel painted surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

S&F 110mm PVC (SWR) bends any radius provided with access door, complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed..

S&F Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe, complete all as specified and directed.

S&F 16 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes, complete all as specified and directed. Make : Jaquar cat Part No. FUS-29053 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed Make : Jaquar Cat No. F-2008161 or equivalent in make as specified in Appendix 'B'

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed. Make Cera Cat No.- F-8030301or equivalent cat part of make as specified in list of make.

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed . Make Cera Cat No. F5005101 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed Make : Cera cat Part No. F2008461 or equivalent cart part of make as specified in list of make here-in-after.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

S&F in repair fancy type drapery rod 20 mm dia mild steel, chromium plated with fixing brackets, incl side brackets, finials complete complete all as specified.

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/ window/ ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed .

S&F Anodised aluminium door shutters,aluminium section wighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all asspecified.

Demolition and breaking up 75/100/150mm dia in bore drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar in any description complete all as specified and directed

M&L for concrete bed to drain pipes of 150 mm dia including packing under and completely surrounding pipes with cincrete after they are laid and tested in cement concrete 1:4:8 type D-2 complete all as apecified and directed

M&L for Reinforced concrete pipes class NP2 of 150 mm dia laid and jointed complete with collars complete all specified and directed

M&L for Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benchings for 150 mm bore pipe complete all as specified and directed.

M&L for preparing newly plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of exterior wall primer with & including a coat of not less than 01 mm thick wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of exterior wall primer with & including a coat of not less than 01 mm thick wall care putty, complete all as specified and directed.

M&L for 1st quality non skid coloured ceramic ENDURA tiles n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 using 40mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement in floor, complete all as specified and directed.

M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying Wall care white ( Putty) thickness not less than 1mm and sand papering surfaces to achieve smooth surfaces and applying distempering with distemper oil emulsion , two coats, white or tinted complete all as specified .

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F in repair SS soap dish complete all as specified and directed Make Cera Cat Part No. F5007106 or equivalent in makes as specified

S&F powder coated anodised aluminium window and ventilator shutter side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips,rubber packing ,anodised aluminium snap beading ,screw anodised aluminium fitting such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle 1 no complete all as specified

S&F anodised aluminium sections in any of door, windows and ventilator etc including fabricator of frame shutter and fixing with necessary glazing clips, joining cleats etc., complete all as specified and directed.

S&F decorative POP cornies of sectional area 30 to 50 sqcm complete all as specified and directed.

Repairs to broken edges of roof projection , chajja, facia, Fins and simillars works girth n exc 45 CM with 15 mm thick plaster including cutting of reinforcement as required , dubbing coat in CM 1:3, required PCC 1:2:4using 12.5 mm stone aggregate up to 4th storey bldgs complete all as specified and directed by EIC.

M&L for rendering 15m thick cement plaster on other than fair faces of brick work or concrete surfaces CM (1:6) finished even and smooth without using extra cement, complete all as specified and directed.

M&L Chequered cement concrete tiles 25cm x25cm x 22mm thick,set, jointed and pointed in neat cement slurry in floors laid over & including 15mm thick screed bed in CM 1:6, complete all as specified.

M&L for forming construction joint 30mm deepx10mm wide filled with sealing compound grade 'A' complete all as specified.

S&F casement window and ventilators with net and grill single or multi shutters turn window and made out of upvc multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using shash mullion having 50x64x2.5mm multi cavity uPVC section, suitably reinforced and shutters are made out of 50x85x2.5mm uPVC section, reinforced and welded in corner with EDPM gasket provision for glass and for air tight at frames and outer side of shutter with single glazed window and adjusting suitable glass bead with perfect hardware like hinges, handles, stays etc complete, mosquito mesh shutters is made out of uPVC extruded section of 61x27x2mm with GI channel of 1.20mm thick welded in corner mosquito net of GI is fitted in shutters with proper required accessarry hinges, MS grill of 12mm round pipe are inserted in main frame and screwed by hidden screwing system with powder coating etc complete all as specified and directed. Note: Glazed shutters glass thicknepss not less than 3.00mm and wire mess shutters with SS wire mesh as approved by GE is also included in quoted rates and no payment will be made seperately on any account.

S&F casement window and ventilators with net and grill single or multi shutters turn window and made out of upvc multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using shash mullion having 50x64x2.5mm multi cavity upvc section ,suitable and reinforced and GI and shutters are made out of 50x85x2.5mm upvc section,reinforced and welded in corner with EDPM gasket provision for glass and for air tightat frames and outer side of shutter with single glazed window and adjusting suitable glass bead with perfect hardware like hinges,handles,stays etc complete mosquito mesh shutters is made out of UPVC extuded section of 61x27x2mm with GI channel of 1.20mm thick welded in corner mosquito net of GI is fitted in shutters with proper required accessarry like,hinge MS grill of 12mm round pipe are insertedin main frame and inserted in main frame and screw by hidden screwing system with powder coating etc complete all as specified and directed.Note:Glazed shutters glass thickness not less than 3.00mm and wire mess shutters with SS wire mesh as approved by Engr-in-Charge is also included no payment will be seperately.

S&F aluminum anodised handle cast type 125 mm, anodised complete all as specified and as directed.

S&F aluminum anodised handle cast type 100 mm, anodised complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete fixed in repair complete all as specified and as directed..

S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

Taking up or down PPR pipe and connections, including cleaning for re-fixing or removal to store 20 mm dia, complete all as specified and as directed.

S&F 20mm outer dia of pipe in 3 layer PPR polypropylene random copolymer concealed pipe SDR 7.4 PN 16 UV stablised and antimicrovial fushion welded having thermal stability for hot and cold water supply including all PPR plain and brass threaded polypropylene random fitting fixed complete to walls,ceiling or in floors etc., complete all as specified and as directed.

M&L for preparation of new plaster of wall and applying two coats of oil bound distemper over chalk whiting primer on plaster surfaces complete all as specified.

M&L for prepararion of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

S&F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality of both side plain white colour rigid and glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet/ cupboard sides, top and bottom and shelves inside complete all as specified and directed. Note:- Kitchen cabinet/cupboard accessories like handle, hinges etc will be measured and paid separately.

S&F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality one side decorative lamination and other side plain white colour to make kitchen cabinet/drawer/cupboard shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom and shelves inside complete all as specified and directed. Note:- (a) Kitchen cabinet accessories like handle, hinges etc will be measured and paid separately. (b) Colour and design of prelaminated board shall be approved by Engr-in-Charge

S&F 100 mm long stainless steel (grades-304) handle fancy type polished bright chrome finish complete all as specified and directed.

S&F in repair stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, 1 mm thick with plug washers and wastes ; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe.

S&F 1 mm thick stainless steel kitchen plate rack 750 x 900 mm of fixed in repair all as specified and as directed.

S&F for 30mm width of flaps continuous piano hinge mild steel,bright finished or electrogalvanised, complete all as specified and as directed.

S&F Hasp and staple 75mm ,safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit writing etc and making good, cutting not exc 10cm girth., complete all as specified and as directed.

M&L in repairs, 75mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete as specified and directed.

S&F for stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nut and securing ends of stays to wall or roof fixed with 75mm bore of pipes complete as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of alkali resistance primer on on external wall surfaces complete all as specified and directed.

Supply & fix PVC connection 15mm bore 450mm long hexagonal brass chromium plated nuts and washers on both sides complete as specified and directed.

Supply & fix coloured plastic water closet seat, black closed pattern with flat bottom and cover and mild steel CP or aluminisied hinging device complete as specified and directed.

M&L for preparation of old decorated surface of ceiling and applying one coats of white wash complete all as specified.

M&L for 15mm dia two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes, complete all as specified and directed.all as specified and as directed

M&L for complete removal of existing treatment including preparation and applying three coats of white wash as on ceiling, complete all as specified and directed.

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over & including a coat of 1mm thick wall care putty, complete all as specified and directed.

Preparation of old wooden painted surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for two or more coats french polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old wooden work complete all as specified

S&F in repair 15 mm bore brass cromium single lever extended basin mixer complete all as specified and directed Make : Jaquar cat Part No. FUS 29023B or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair 15 mm bore brass cromium single lever wall mixer with provision of hand shower, complete all as specified and directed Make : Jaquar cat Part No. FUS 29119 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair Corner glass shelf with bracket, complete all as specified . Make : Jaquar cat Part No. CAN-1173 or equivalent cart part of make as specified in list of make here-in-after.

S&F CP jet spray including 1m long PVC/Chromium plated flexible PVC pipe, necessary nut bolts and PVC washers fixed with PVC seat cover for pedestal pattern water closet, complete all as specified. Make : Jaquar cat Part No. BEA-17 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair 32mm dia bore brass chromium plated waste coupling complete all as specified .

S&F Chromium plated towel rail 600mm long fixed with brass screws complete all as specified. Make : Jaquar cat Part No. AKP-325711P or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair Vitreous china table top wash basin size 565mmx425mmx140mm white fixed with necessory fixing accessories, complete all as specified. Make : Jaquar cat Part No. KUSWHT-35935 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair Bib cock chromium plated cast copper alloy with wall flange with capastan head screwed down for iron pipe or for brass ferrule suitable for 15mm bore pipe, complete all as specified. Make : Jaquar cat Part No. FUS-29037 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair 2-way Bib cock chromium plated cast copper alloy with wall flange with capastan head screwed both end for iron pipe or for brass ferrule suitable for 15mm bore pipe, complete all as specified. Make : Jaquar cat Part No. FUS-29041 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repair stainless steel grating 100mm square/round with or without hole complete all as specified .

S&F in repairs Rimless single piece WC with UF soft closed seat cover, hinges, fixing accessories set and cistern fittings, size 655x355x735mm including connection to trap and drain, complete all as specified. Make : CERA cat Part No. SI013207 or equivalent cart part of make as specified in list of make here-in-after.

S&F in repairs Toilet paper holder with flap fixed with screws, complete all as specified. Make : Jaquar cat Part No. CAN-1153S or equivalent cart part of make as specified in list of make here-in-after.

S&F in repairs overhead shower 150x150mm square shape single flow ABS body and face plate chromium plated, complete all as specified.

S&F for 1st class H/W panelled shutter 40mm thick (any number of panels) with panels of timber flat on both sides (feathers edged) or 12mm venerred particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S&F 1st class hard wood 35mm thick glazed and skelton shutter(wihout sash bars) open rebated to received gauze etc fitted with cut and mitred beads for securing gauze as specified in SSR Part-I Section-8, clause 8.24(a) and fixed to frame complete all as specified and as directed..

M&L 1st class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

S&F 100mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified.

S&F 150mm long brass barrel tower bolt with cast or sheet barrel and rolled of cast bolt & fixed complete all as specified.

S&F 150mm long extruded brass handle fabricated type polished & fixed complete all as specified.

S&F fancy type curtain rods CP of 20mm dia brass with fancy type brass bracket and knobs fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F for 40mm width of flaps continuous piano hinge mild steel,bright finished or electrogalvanised, complete all as specified and as directed.

S&F Hasp and staple of size 100mm, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

S&F 300mm brass sliding door bolt with sand or die cast brass hasp, staple (Bolt type) and fixing bolt with rolled or drawn brass bolt and fixed, complete all as specified and as directed.

M&L for joint free glazed ceramic coloured tiled in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cm 1:4 on verticle surfaces of wall for fixing of wall tiles all as specified and directed. Note :- Colour and design approved by Engineer-in-Charge.

M&L for light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar (1:6) 15mm thick for laying floor finises of tiles all as specified and directed by Engr-in-charge. Note :- Colour and design approved by Engineer-in-Charge.

M&L for light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42sqm but not exceeding 1.00 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed.

S&F PVC waste pipe, 80cm long of 32mm dia bore for WHB/Sink, fixed complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames including punching out old glazing pins / putty or fixed with beads, complete all as specified and directed.

S&F 4 mm thick frosted glass fixed with oil putty in square nexc 0.5 sqm in each pane, completed all specified and directed

S&F mirror polishing on marble/ granite/ kota stone/ stone work wherever required to high glossy finish, completed all specified and directed

Taking down Old unserviceable cable of any type any size from any position, complete all as specified and directed..

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soil) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning to underground cable with clean dry river sand 8cm thick before laying and 15cm after laying of cable, complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness only shall be measured & Paid.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core.

Supply & Laying of sub class 'B'bricks locally available best quality laid flat (length of bricks laid across the length of cable) in tranches for protection of U/G cable complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soilcomplete all as specified and directed by Engr-in-Charge.

Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fittingS&Fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kitS&Fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.

M&L for new concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

All as per Srl item No. 249 above but for one light/fan point controlled by one, one way switch

All as per Srl item No. 249 but for One socket outlet point 6 A on same board

All as per Srl item No. 249 but for one bell point controlled by one bell push.

All as per Srl item No. 249 but for one light point controlled by two Nos two way switch

All as per Srl item No. 249 but for one socket outlet point 6 Amps on independent board

All as per Srl Item No. 249 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.

All as per Srl Item No. 249 here in before but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for one AC socket point on independent board complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F electronic fan regulator 230 Volts, stepped type hum free 100/300 watt, complete all as specified and directed.

Supply & Fixing Modular AC Box With 20A SP MCB,Plastic Enclosure & Unbreakable Heavy Duty With ISI AC Plug Top for AC all as specified and directed Make :-Anchor/ Havells/Bajaj or equivalent specified make.

Taking down Old unserviceable sub main wiring any size, complete all as specified and directed.

M&L for sub main wiring with two run of 4.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB and AC complete all as specified.

M & L for sub main wiring with two run of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB and AC including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

M&L for sub main wiring with two runs of 10.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 10.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc of any type and any capacity and further disposal including making good the disturbed surfaces in cement mortar (1:4) including applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and as directed.

S&F epoxy powder coated MCB distribution box double door TPN 4 way horizontal type for MCBs alongwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed.

S&F MCB, TPN ,100 Amp, 415V 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning, complete all as specified.

S&F MCB, TPN ,63 Amp, 415V 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning, complete all as specified.

S&F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.

Supply and fix epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S&F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection complete all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

Taking down old unserviceable light fitting any type, complete all as specified.

Supply and fixing Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours. indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S&F bell push piano flush type polycarbonate single pole, 5 Amps complete all as specified.

S&F in replacement, bell/buzzer Ding Dong type AC 230 Volts complete all as specified and directed.

S&F in replacement, LED tube light fitting,1X20 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack fitting including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, building security light LED 20 Watt, IP 66, including provision of GI bracket of siutable size, clamp and nut & bolt etc including PVC insulated flexible wire 3 core 23/0076 copper conductor, complete all as specified.

M&L for rigid non-metallic PVC conduit of 20 mm dia including all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for dressing of hanging wires all as specified and as directed.

S&F Modular Switch 1 way, 6A, 1 module, complete all as specified and as directed.

S&F Modular switch 2 way, 6A, 1 module, complete all as specified and as directed.

S&F Modular Switch 1 way 16A, 1 module, complete all as specified and as directed.

S&F Modular socket 6A, 2/3 pin combined 2 module, complete all as specified and as directed.

S&F Modular socket 16A, 2/3 pin combined 2 module, complete all as specified and as directed.

S&F Modular bell push flush type 6 A, 1 Module , complete all as specified and as directed.

S&F Modular fan regulator 120 W, 2 module complete all as specified and as directed.

M/S A P CONSTRUCTION (BID ID -3124943)

R.K.ASSOCIATES (BID ID -3127102)