Construction of VDCC Bank Training Centre Building at Vijayapur

Construction of VDCC Bank Training Centre Building at Vijayapur

Earth work in surface excavation for stripping seating of bund Road way by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceedi...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights ...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m as per drawing and technical pecifications including Eachting out shoring strutting barricading caution lights including cost ...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m as per drawing and technical pecifications including Eachting out shoring strutting barricading caution lights including cost ...

Filling available excavated earth (excluding rock) in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramm...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading g...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment creating continuous chemical barrier under and around the column pits walls trenches basement excavation top sur...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

ENTRANCE STEP 200 and 300 THICK RC WALL

PEDESTAL FOR COLUMNS

Providing and laying in Cement Concrete for all Basement & surface level works return walls retaining walls sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggreg...

Providing and laying in position Cement Concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works & other parallel works from 0.50m to 3.50 m height. The ...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Steel Fabrication. Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/welding jo...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of mat...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering providing and removin...

Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering providing and removing scaff...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width along route of walls chipped for s...

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6 20 mm thick and joints finished with cement mortar 1:3 over existing cement concr...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural dr...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades laid o...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except...

Providing skirting dadooing rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed til...

Providing Salwood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves (excluding cost of cement concrete and side clamp...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing ...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified Anti Termite UV resistant high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising ...

Applying priming coats with primer of approved brand and manufacture having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having V...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel ...

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and forei...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin UV resistant dirt & pick up resistant Alkali & Water resistant of required shade: New work (T...

Providing assembling and supplying vision glass panels (IGUs) comprising of hermetically sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specifie...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting th...

Supplying and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted ...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomina...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom cold applied P...

POST TENSION CONCRETE WORK

A) Design Codes

The design is in accordance with IS: 1343-1980 IS 456 BS8110: The Structural Use of

Concrete 1997 and TR43.

B) Pre - Stressing System & Materials

COMPOUND WALL : Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as p...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricading caution li...

In ordinary/soft rock without blasting Depth exceeding 1.5 m but not exceeding 3 m

consider 20% of total excavation qty

Earth work excavation for pipeline trenchesby mechanical means above 600 mm trench width as per drawing and technical specification including Eachting out construction of shoring strutting cost of b...

Filling available excavated earth (excluding rock) in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramm...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening cutting bending placing in position binding and anchoring to adjacent m...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of ex...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6 mm angle iron 3 mm M.S. gusEach plates at the junctions and corners 25 mm dia pulley 40x40x6 mm an...

RETAINING WALL Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricading...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights ...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification including Eachting out construction of shoring strutting cost of blasting materials barricadi...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing ramming watering including cost of all materials and labour with a...

Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works & other parallel works from 0.50m to 3.50 m height. The ...

Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/welding joints tying with bin...

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than ...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2 extending through the full width of the structure with slo...

RCC DRAIN Earth work Excavation: Earth work excavation by manual means for drainscanals waste weir draft approach channels key trench foundation of Bridges and such similar works as per drawing and ...

Providing and laying in position plain cement concrete for levelling

course for all works in foundation. The granite/trap/basalt crushed

graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening cutting bending placing in position binding and anchoring to adjacent m...

ROAD WORK Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unservice...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead transportation to site spreading g...

Loosening leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment scarified to a depth of 150 mm mixed with water at OMC and then compacted b...

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator ...

Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...

Construction of Dry lean cement concrete sub-base over a prepared sub grade with coarse and fine aggregates confirming to IS 383:2016 the size of coarse aggregates not exceeding 25mm replacing cement ...

Construction of M40 grade un-reinforced dowel jointed plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3 coarse and fine aggregate conforming to IS 383:2016 maximum size ...

Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/welding joints tying with bin...

BOREWELL Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S by vertical electrical sounding by adopting ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes collars and c...

Borewell depth of 50 to 100 Mtrs

Borewell depth of 100 to 150 Mtrs

Borewell depth of 150 to 200 Mtrs

Borewell depth of 200 to 250 Mtrs

Supply of ISI mark 175mm nominal boreplain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments electrical resistance welded steel tubes mate...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications including Eachting out construction of shoring strutting barricading c...

Refilling available earth around trenches/pipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m....

Providing Submersible Pump Each of 150mm dia suitable for bore well and confirming to IS 8034 2000; 3Phase SS Bowl & Impeller with Low volt Motor as per specifications to work site as per necessary am...

Providing Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary including ...

Providing laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and r...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x6sqm...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments(50MM)

Supply and delivery at site of brand new best make non-return valve asper IS 778/1984 with ISI Mark and as per its latest amendments (50MM)

Supply installingtesting and commissioning COMMON control panel consisting of the following INCOMING:1 No Each of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Vol...

Labour charges for Erection Electrification and commissioning of Pump Eachs including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well cap...

TANK Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricad...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricad...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricad...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)

For 5 KM lead = 2.5 x 1.28 x 5 + loading and Unloading charges =68 = 84.00/cum

Filling available excavated earth (excluding rock) in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

RAIN WATER TANK FILTER WATER TANK RAW WATER TANK FIRE WATER TANK-1 FIRE WATER TANK-2 INTERMIDIATE WALLS

RAIN WATER TANK FILTER WATER TANK RAW WATER TANK FIRE WATER TANK-1 FIRE WATER TANK-2

Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning traightening cutting bending hooking laping/welding joints tying with bind...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom cold applied P...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering providing and removing scaffolding includ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering pro...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt dust mo...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking rrangements with M.S flats 32x6 mm etc & p...

STP Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable m...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricad...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricad...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including Eachting out shoring strutting barricad...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Disposal of 10Km)

For 5 KM lead = 2.5 x 1.28 x 5 + loading and Unloading charges =68 = 84.00/cum

Filling available excavated earth (excluding rock) in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning traightening cutting bending hooking laping/welding joints tying with bind...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom cold applied P...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering providing and removing scaffolding includ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering pro...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt dust mo...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking rrangements with M.S flats 32x6 mm etc & p...

PHE WORKS Providing and fixing white vitreous china pedestal type water cloEach (European type) with seat and lid 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittin...

Providing and fixing wash basin with C.I. brackets 15 mm dia CP Brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing unplasticised PVC connection pipe with brass unions : - 20 mm nominal bore

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern with fittings standard size C.P. brass flush pipe spreaders with ...

Providing and fixing brass bib cock of approved quality :15 mm nominal bore

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete

Providing and fixing Stainless Steel Grab Bar 600 mm Long with all concealed fitting arrangements & all necessary accesories complete - Class - Premium

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre

long with S.S. triangular plate to Eureopean type W.C. of quality and make

as approved by Engineer - in - charge.

Sanitary piping - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect ...

PVC pipes 75mm dia. 6 kg/sqcm & class 3

PVC pipes 110mm dia. 6 kg/sqcm & class 3

PVC pipes 160mm dia. 6 kg/sqcm & class 3

WATER SUPPLY - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

25 mm nominal dia pipes

32 mm nominal dia pipes

32 mm nominal bore

Providing and fixing ball valve (brass) of approved quality High or low

pressure with plastic floats complete :

20 mm nominal bore

25 mm nominal bore

Providing and Fixing of elastomeric insulation for concealed hot water CPVC pipes running in toilets with VIDOFLEX 6 mm thick preformed tubings wrapped all round. All joints shall be sealed with POLYB...

SHAFT & TERRACE FLOOR PIPING:

Providing and Fixing of insulation for exposed hot water CPVC pipes with VIDOFLEX 9mm performed tubings wrapped all round. All joints shall be sealed with POLYBOND V9 adh...

Providing fixing testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet i...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipeshaving thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes ...

25 mm nominal dia pipes

32 mm nominal dia pipes

40 mm nominal dia pipes

50 mm nominal dia pipes

65 mm nominal dia pipes

80 mm nominal dia pipes

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights r...

Sanitary Piping Works - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and pe...

PVC pipes 110mm dia. 6 kg/sqcm & class 3

PVC pipes 160mm dia. 6 kg/sqcm & class 3

Lowering laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type with all labour with enc...

110mm - Waste pipe

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and lowering into trenches laying true ...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete

with C.I. grating brick masonry chamber with water tight C.I. cover 180

x 150 mm size P type & With Non Modular common burnt clay ...

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 600X850 mm internal

Extra for depth beyond 45 cm of brick masonry chamber : For 600x850

mm size With common burnt clay (non modular) bricks of class

designation 3.5

Providing and constructing "WIRE CUT BRICK MACHINEHOLE

CHAMBERS" using Portland/Pozzolana cement conical in shape at top

with CC 1:3:6 foundation using 40mm and down size graded metal of

approved qual...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights r...

Refilling available earth around trenches/pipelines cables in layers not

exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m. ...

Rain Wtare Piping Works- Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and p...

PVC pipes 110mm dia 6 kg/sqcm & class 3

PVC pipes 160mm dia. 6 kg/sqcm & class 3

Lowering laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type with all labour with enc...

110mm - Waste pipe

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 455x610 mm internal

Constructing brick masonry chamber for underground C.I. inspection

chamber and bends with bricks in cement mortar 1:4 (1 cement : 4

coarse sand) C.I. cover with frame (light duty) 600X850 mm internal

Extra for depth beyond 45 cm of brick masonry chamber : For 600x850

mm size With common burnt clay (non modular) bricks of class

designation 3.5

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and lowering into trenches laying true ...

Pipes of SN 8 200mm dia.

Pipes of SN 8 300mm dia.

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width as per drawing and technical specifications including Eachting out shoring strutting barricading caution lights rem...

Refilling available earth around trenches/pipelines cables in layers not exceeding 20 cms in depth compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1.5 m. ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and ove...

ELECTRICAL WORKS GF GROUND FLOOR LTG & RP PANEL1

Incoming Nos. 160 amp FP On load Manual Change over switch (Two incoming Supply installationtesting and commissioning of from Main EB Supply installati...

A) INTERNAL ELECTRICLE WORKS GROUND FLOOR

STILT FLOOR - ESCOMs SR 2023-24

DAS Specification Compact RMU (VCB/SF6 Type) as per IEC-62271The DAS RMUs shall have the following in addition to the Standar...

Load Break Switch

HT & LT Metering Equipment

11 kV HT Metering cubicle of different CT Ratio Both side cable entry type with 3 CT & 3 PT With Transparent Cover TTB with 30x8 mm Copper Busbar Modem & ...

Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any)

3x185 to 3x240 Sqmm

2.5 to 25 Sqmm (Single/3.5/4 Core)

35 to 95 Sqmm (3.5/4 Core)

120 to 240 Sqmm (3.5/4 Core)

Making and Fixing pot head for HT Cable only

Heat shrinkable Type Terminations

3x185 to 3x240 Sqmm

Heat shrinkable Straight Through Joint

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

120 to 240 Sqmm

300 to 400 Sqmm

Cable Joint and wiring (for HT & LT UG Cable)

Heat shrinkable Straight Through Joint

3x185 to 3x240 Sqmm

1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1 Armouring strip thickness and resistivity as per IS-3975

16 Sqmm 4 Core (11 GI Strips - 4 x 0.8 mm)

25 Sqmm 4 Core (13 GI Strips - 4 x 0.8 mm)

35 Sqmm 3.5 Core (14 GI Strips - 4 x 0.8 mm)

70 Sqmm 3.5 Core (18 GI Strips - 4 x 0.8 mm)

120 Sqmm 3.5 Core (23 GI Strips - 4 x 0.8 mm)

240 Sqmm 3.5 Core (30 GI Strips - 4 x 0.8 mm)

300 Sqmm 3.5 Core (32 GI Strips - 4 x 0.8 mm)

Compression type Aluminium Tubular in Line Connector for Aluminum Conductor

Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573

Epoxy Terminating Kit (Poth...

11 kV Jointing & Cable Termination Kit as per IS-13573

Heat Shrinkable Type Transition Jointing Kit for XLPE Cable Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm

Grounding Material

Optical Fibre Cable (OFC) and its Accessories

Miscellaneous Materials

RCC Hume Pipe 2000 mm long 150 mm Dia

RCC Hume Pipe 2000 mm long 200 mm Dia

Cable Covering Tile 125x250x40 mm Per 1000

PVC CONDUIT & ITS ACCESSORIES

Open Conduit System

Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends junction box...

25 mm dia 2 mm thick

32 mm dia 2.5 mm thick

Concealed Conduit System

Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends metal/PVC J...

25 mm dia 2 mm thick

Supplying heavy gauge PVC Conduit Pipe .... dia mm thick with suitable size bends metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by...

upto 50 mm conduit CC floor

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends junction box elbows screws at an interval of 300 mm as required. Supplying PVC flexible condu...

Supplying Galvanized steel flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 30...

Supply and laying of under floor (concealed) raceways manufactured from 1.5mm thick cover and base (including partitions for multi compartment raceways) zero spangle pre-galvanized sheet steel with 27...

75 x 38 x 2500mm 1 compartment

Supply and laying of under floor junction boxes shall be of three-piece construction Basebox frame and load plate.Base boxshall be robust in its construction manufactured from 1.5mm thick zero spangle...

For (50-200x38mm) duct.Dimensions:272x272x60mm. 10 mm Recess

For (50-300x38mm) duct.Dimensions:372x372x60mm. 10 mm Recess

Supply and laying of of RFT raised floor trunking system-Junction for raised Flooring.

For (50-100x38mm) duct.Dimensions: 170 mm x 170 mm x 56 mm

For (50-200x38mm) duct.Dimensions: 240 mm x 240 mm x 56 mm

For (50-300x38mm) duct.Dimensions: 340 mm x 340 mm x 56 mm

Point wiring using Copper wire with switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase ...

Medium point above 3m upto 6m from tapping point to out let

Long point above 6m upto 10m from tapping point to out let via

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase...

Medium point above 3m upto 6m from tapping point to out let

Long point above 6m upto 10m from tapping point to out let via

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed ...

The following additional tests are compulsory either to be conducted at works or independent lab with witness by

inspecting authority.

Additional Tests for FRLS-A...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor ...

SWITCHES SOCKETS & ACCESSORIES

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complet...

6A Two Way Switch

Stepped Fan Regulator Two Module

16A One Way Switch

6/16A Universal Socket

TV/Telephone Socket

RJ45/I.O Outlet Cat-6

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50Hz AC

supply & completely wired on existing box.

Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using

necessary machine screws.

Supplying ......way plastic gang ...

2 to 4 Way Gang Box

6 to 10 Way Gang Box

Supplying and fixing of metal clad industrial plugs and

2pole+earth 250V PLUG

3pole+earth 440V PLUG

2pole+earth 250V SOCKET

3pole+earth 440V SOCKET

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.

POLES & HIGH MAST

Fabricating supplying and erecting Swaged tubular Pole of height ...m having three sections and providing two coats of red oxide paint and finished wit...

Fabricating supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft IS 2062 for bas...

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts nuts etc. complete.

Single Arm Bracket with 2000 mm Standar...

CONTROL SWITCH GEARS and ACCESSORIES

Supplying fully automatic stardelta starter unit push button type with suitable wires 3 contactors one adjustable thermal timer m...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA bolts nuts etc. with provision for fixing suit...

III - Double Door

Supplying fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/

32-40A 2 pole Specifications as per sanctioned estim...

FANS & AIR CONDITIONERS

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz AC Supply complete. 12" Sweep (300 mm)

48 Sweep 5 Star (1200 mm)

Supplying wall mounting fan suitable to operate at single-phase 230v AC. supply.

NETWORKING & TELECOMUNICATION

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.

Supplying & Fixing of switch mounting rack with power manager & Cable manager.

32U with 650mm depth

Supplying & Fixing of Power strip

Supplying & Fixing of Fan

Supplying fixing of Network Switches

24 Port Gigabyte (manageable)

24 Port 10/100 Switch

Supplying & fixing of I/O socket with back box

Supplying & Fixing of ... ms Cat 6 Patch Cable

Supplying & Fixing of Patch panel for LAN cabling

24 Port 10/100/1000 patch panel

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.

Supplying installing testing and commissioning of Diesel Generator Each with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/...

Supply Erection testing and commissioning of AMF panel suitable for .....kVA DG Each. The panel is of cubical type base/floor mounting control panel with hinged ...

LUMINAIRS / LIGHT FIXTURES ACCESSORIES

Supplying & fixing retrofit type PL LED Lamp W LED

linear source with CCT 6500 degree K CRI 70. efficacy

LED light fitting 1 x 4' - 36/40 W

Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing with spring...

LED square or round down light 15-18W

LED Street light.

Supply of LED Streetlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of ...

LED Flood Light.

Supply of LED floodlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of ...

Supply of LED Bollard light fitting of ...W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diff...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.

MAINTENANCE WORKS SupplyingfixingandwiringearthelectrodeforgroundingofliftstransformersDGEachEachc.using40mmdia2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopoftheearth...

25 x 3 mm GI strip

25 x 6 mm GI strip

40 x 6 mm GI strip

50 x 6 mm GI strip

25 x 3 mm Copper strip

25 x 6 mm Copper strip

50 x 6 mm Copper strip

600 x 600 x 3 mm Copper plate

2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.

Supplying & Fixing Chemical earthling for grounding. ConduitsICcut-outs & other equipments back fill compound which is non-corrosivethermally conductive potential to per missiblelimits sup...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over

existing pole / wall ceiling including clA bolts nuts and wiring using suitable capacity wires.

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...

Fixing a ceiling /wall mounting fan of all capacities and all types with necessary clA and 'S' hook made out of 15mm dia MS rod with 5 A. ceiling rose of app...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

LT ISOLATOR Panels (Outdoor Type)

Design manufacturing Supply installationtesting and commissioning of floor mounting free standing totally enclosed outdoor IP-55 cubical extensible compartmentalized...

Supply installationtesting and commissioning of floor mounting free standing totally enclosed indoor duty with IP 42 protection cubical type front operational dust and vermin proof pan...

DG AMF CUM SYNCHRONISATION PANEL Complete Specifications as per estimate DG AMF CUM SYNCHRONISATION PANEL as described above As per Schematic and as per specification complete in all respects

345 KVAR APFCR PANEL

1 Nos. of 800 Amp FP MCCB of 16 KA breaking capacity With O/C S/CEF & Shunt trip release with interlocking facility.

This panel should include Type -2 Surge Protection De...

1 Nos. of 250 Amp FP MCCB of 16 KA breaking capacity With O/C S/CEF & Shunt trip release with interlocking facility.

This panel should include Type -2 Surge Protection Device wi...

END FEED UNITS FOR RISING MAINS

Design fabrication Supply installationtesting and commissioning of following end feed units fabricated out of 1.6 mm thick sheet steel powder coated enclosure and c...

CAR CHARGING PANEL

1 Nos. 250 amp FP On load Manual Change over switch (Two incoming Supply installationtesting and commissioning of from Main EB Supply installationtesting and commissioning...

EMERGENCY LTG PANEL

1 Nos. 100 amp FP On load Manual Change over switch (Two incoming Supply installationtesting and commissioning of from Main EB Supply installationtesting and commissionin...

EXTERNAL LIGHTING PANEL

Supply installationtesting and commissioning of installation testing and commissioning of outdoor double door type front operated front access totally enclosed free standing d...

DAS Specification Compact RMU (VCB/SF6 Type) as per IEC-62271The DAS RMUs shall have the following in addition to the Standards: DC motors Numerical Relays Multi-functional meters fault passage indica...

Load Break Switch

HT & LT Metering Equipment

11 kV HT Metering cubicle of different CT Ratio Both side cable entry type with 3 CT & 3 PT With Transparent Cover TTB with 30x8 mm Copper Busbar Modem & 2...

Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any)

3x185 to 3x240 Sqmm

2.5 to 25 Sqmm (Single/3.5/4 Core)

35 to 95 Sqmm (3.5/4 Core)

120 to 240 Sqmm (3.5/4 Core)

Making and Fixing pot head for HT Cable onlyHeat shrinkable Type Terminations

3x185 to 3x240 Sqmm

Heat shrinkable Straight Through Joint

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

120 to 240 Sqmm

300 to 400 Sqmm

Cable Joint and wiring (for HT & LT UG Cable)

Heat shrinkable Straight Through Joint

3x185 to 3x240 Sqmm

1.1 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1 Armouring strip thickness and resistivity as per IS-3975

16 Sqmm 4 Core (11 GI Strips - 4 x 0.8 mm)

25 Sqmm 4 Core (13 GI Strips - 4 x 0.8 mm)

35 Sqmm 3.5 Core (14 GI Strips - 4 x 0.8 mm)

70 Sqmm 3.5 Core (18 GI Strips - 4 x 0.8 mm)

120 Sqmm 3.5 Core (23 GI Strips - 4 x 0.8 mm)

240 Sqmm 3.5 Core (30 GI Strips - 4 x 0.8 mm)

300 Sqmm 3.5 Core (32 GI Strips - 4 x 0.8 mm)

Compression type Aluminium Tubular in Line Connector for Aluminum Conductor

Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 Epoxy Type

Epoxy Terminating Kit (Pothead...

11 kV Jointing & Cable Termination Kit as per IS-13573

Heat Shrinkable Type Transition Jointing Kit for XLPE Cable

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable

Grounding Material Pipe Grounding Rod Earthing

Optical Fibre Cable (OFC) and its Accessories

Miscellaneous Materials

RCC Hume Pipe 2000 mm long 150 mm Dia

RCC Hume Pipe 2000 mm long 200 mm Dia

Cable Covering Tile 125x250x40 mm Per 1000

PVC CONDUIT & ITS ACCESSORIES

Open Conduit System

Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends junction boxe...

25 mm dia 2 mm thick

32 mm dia 2.5 mm thick

Concealed Conduit System

Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends metal/PVC Ju...

25 mm dia 2 mm thick

Supplying heavy gauge PVC Conduit Pipe .... dia mm thick with suitable size bends metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by...

upto 50 mm conduit CC floor

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends junction box elbows screws at an interval of 300 mm as required.

Supplying PVC flexible condu...

Supplying Galvanized steel flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 30...

Supply and laying of under floor (concealed) raceways manufactured from 1.5mm thick cover and base (including partitions for multi compartment raceways) zero spangle pre-galvanized sheet steel with 27...

75 x 38 x 2500mm 1 compartment

Supply and laying of under floor junction boxes shall be of three-piece constructionBasebox frame and load plate.Base boxshall be robust in its construction manufactured from 1.5mm thick zero spangle ...

For (50-200x38mm) duct.Dimensions:272x272x60mm. 10 mm Recess

For (50-300x38mm) duct.Dimensions:372x372x60mm. 10 mm Recess

Supply and laying of of RFT raised floor trunking system-Junction for raised Flooring

For (50-100x38mm) duct.Dimensions: 170 mm x 170 mm x 56 mm

For (50-200x38mm) duct.Dimensions: 240 mm x 240 mm x 56 mm

For (50-300x38mm) duct.Dimensions: 340 mm x 340 mm x 56 mm

Point wiring using Copper wire with switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)...

Medium point above 3m upto 6m from tapping point to out let

Long point above 6m upto 10m from tapping point to out let via

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase ...

Medium point above 3m upto 6m from tapping point to out let

Long point above 6m upto 10m from tapping point to out let via

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed ...

Additional Tests for FRLS-Applicable Standard

Oxygen Index -IS 694-2010 Clause 16.8

Temperature Index -IS 694-2010 Clause 16.13

Smoke Density -IS 694-2010 Clause 16.14

Test for Halogen Acid...

SWITCHES SOCKETS & ACCESSORIES

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and f...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws bolts nuts etc. complet...

6A Two Way Switch

Stepped Fan Regulator Two Module

16A One Way Switch

6/16A Universal Socket

TV/Telephone Socket

RJ45/I.O Outlet Cat-6

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50Hz AC

supply & completely wired on existing box.

Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using

necessary machine screws.

Supplying ......way plastic gang b...

2 to 4 Way Gang Box

6 to 10 Way Gang Box

Supplying and fixing of metal clad industrial plugs and

2pole+earth 250V PLUG

3pole+earth 440V PLUG

2pole+earth 250V SOCKET

3pole+earth 440V SOCKET

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.

POLES & HIGH MAST

Fabricating supplying and erecting Swaged tubular Pole of height ...m having three sections and providing two coats of red oxide paint and finished with two coats...

Fabricating supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft IS 2062 for bas...

Fabrication Supplying Erection Testing and Commissioning of

...... ms long Polygon high mast with Single/Multiple telescopic sections having (minimum overlap distance of 1.5 times of top ...

CONTROL SWITCH GEARS & ACCESSORIES Supplying fully automatic star-delta starter unit push button type with suitable wires 3 contactors one adjustable thermal timer mo...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA bolts nuts etc. with provision for fixing suit...

III - Double Door

Supplying fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/

FANS & AIR CONDITIONERS

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz AC Supply complete.

12" Sweep (300 mm)

Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc for operation on 230 V 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with

NETWORKING & TELECOMUNICATION

upplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.

Supplying & Fixing of switch mounting rack with power manager & Cable manager.

32U with 650mm depth

Supplying & Fixing of Power strip

Supplying & Fixing of Fan

Supplying fixing of Network Switches

24 Port Gigabyte (manageable)

24 Port 10/100 Switch

Supplying & fixing of I/O socket with back box

Supplying & Fixing of ... ms Cat 6 Patch Cable

Supplying & Fixing of Patch panel for LAN cabling

24 Port 10/100/1000 patch panel

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.

DIESEL GENERATOR Each

Supplying installing testing and commissioning of Diesel Generator Each with following specifications. Power rating as per standard reference condition as ...

Supply Erection testing and commissioning of AMF panel suitable for .....kVA DG Each. The panel is of cubical type base/floor mounting control panel with hinged ...

LUMINAIRS / LIGHT FIXTURES &ACCESSORIES

Supplying & fixing retrofit type-PL- LED Lamp W LED

linear source with CCT 6500 degree K CRI 70%. efficacy

LED light fitting 1 x 4' - 36/40 W

Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing with spring...

LED square or round down light 15-18W

LED Street light. Supply of LED Streetlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising o...

LED Flood Light.

Supply of LED floodlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of a...

Supply of LED Bollard light fitting of .W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffus...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.

MAINTENANCE WORKS

SupplyingfixingandwiringearthelectrodeforgroundingofliftstransformersDGEachEachc.using40mmdia2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopoftheearth...

GI/Copperstripsforgroundingconnectionsusingnecessaryfixingmaterials as required.

GI/Copper strips

25 x 3 mm GI strip

25 x 6 mm GI strip

40 x 6 mm GI strip

50 x 6 mm GI strip

25 x 3 mm Copper strip

25 x 6 mm Copper strip

50 x 6 mm Copper strip

600 x 600 x 3 mm Copper plate

2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.

Supplying & Fixing Chemical earthling for grounding. ConduitsICcut...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over

existing pole / wall ceiling including clA bolts nuts and wiring using suitable capacity wires.

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...

Fixing a ceiling /wall mounting fan of all capacities and all types with necessary clA and 'S' hook made out of 15mm dia MS rod with 5 A. ceiling rose of app...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

DISTRIBUTION TRANSFORMER - REFER SLD BEFORE QUOTING FOR THE TRANSFORMER AVR ETC. -

Supply testing and Commissioning of 750KVA 11KV/433V Oil type Distribution Transformer 3ph 50Hz with On Load Tap cha...

BUSDUCTS AND ACCESSORIES (SANDWICH)

Supplying installing on wall or suspension on ceiling testing and commissioning

of following capacity Air insulated Compact Type Bus trunking for the use

Additional plug in hole

Fixed Support (1pc/Each)

Vertical Spring Hanger (1pc/Each)

Supplying istalling testing and commissioning of following capacity TPN

tap off box / Plug in box made of 1.mm thick sheet steel enclosure duly

painted with powder coating on existing overhead bus bar...

Materials for installation like L angles supports sut & bot washers etc….

LIGHTENING PROTECTION

AIR TERMINATION ( TERRACE LEVEL) IS/IEC -62305-3

Supply & installation of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164...

Supply & installation of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm M8 Screw to connect the conductor holder.Weather and temperature resistan...

Supply & installation of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC 62305 part-3

Nominal size 10/16 mm aluminium rod:

2 Mtr Airterminal: semi-hard (E-AlMgSiO5 c...

Supply & Installation ofProviding of wall fixing cross bar clamp for conductor upto 16mm using hot dip galvanised Steel

Supply & Installation of terminal for for fixing RD 8mm round conductor to the air termination rod upto 16mm

Supply & Installation of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE...

Supply & Installation of Providing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU.

Supply & Installation of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VD...

Down Conductor System

Supply & Installation of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305 (IS/IEC 6230...

Supply & Installation of Roof conductor holder for parapet- Polyamide Conductor holder:

With M8 female thread or diameter 7mm M8 Screw to connect the conductor holder.Weather and temperature resistan...

Supply & Installation of Test Joint suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer

Supply & Installation of Providing of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts.

Supply & Installation of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized.

OBO Type No. 5052 DIN 30X3 ( 545043...

Supply & Installation of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate.

OBO Type No. 256 S6 FT (5314572)

Supply & Installation of Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric.

Supply & Installation of UL Listed & CPRI Tested maintenance free Low carbon copper coated earth rod of 3 metre electrode having diameter of 14 mm with copper coating thickness of 250micron tested as ...

Supply & Installation of Universal clamp made of SS to connect rod with flat conductor

Supply & Installation of Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7TCLP tested.

Supply & Installation of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system .

LED Luminaire housing with Drivers as specified and with all accessories as required with high efficiency LED lamps and comply with green building concept.The sample fixture of each of the ...

70W Midbay Light

11W Mirror Light

DG RELATED WORK

Supply & Installation of Mtrs Height Exhaust Chimney asper manufacturers design to comply with local CPCB Norms Complete with all accessories suitable for 500kVA DG Each . (The Vendo...

Supply and installation of lightning arrestor for the stack including 2 runs of 25x6 GI down conductors clamped neatly with spacers at not more than 600mm spacing testlink at a height of 1200mm from g...

Supply installation and commissioning of aviation obstruction lights low intensity Twin LED type. The high powered lighting diodes shall be sourced from the most reputed source. The light fixture sha...

UPS & BATTERY SYSTEM

Manufacture assembly supply installation testing delivery and commissioning of 40KVA 3 phase input 3 phase output Conventional/Monolathic type Uninterruptible Power Supply (UPS)...

Supply Installation Testing and commissiong battery bank for 40KVA load. The battery should be of Conventional VRLA 12V FR container type with end cell voltage of 1.7V of approved makes to give 15 min...

Unynivin Copper conductor flexible Power Cabling between Battery & UPS system .Quantity of cables should be as per site conditions.

OUTDOOR IP55 11kV 1 HT PANEL - FOLLOW SINGLE LINE DIAGRAM ALONG WITH THIS SPECIFICATION. Design Engineering Manufacturing Supply and supervision for installation testing and commissioning of 11KV HT ...

SAFETY ACCESSORIES

Supply and Fixing of Laminated First Aid Charts in Hindi & English

Supply of Hand Gloves 11KV with test certificate

Supply and Fixing of 11kV danger boards with all fixing accessories.

11KV HT Route markers with MS Angle supports and grouting.

Supply Earth Discharging Rod with Suitable screw clamping discharge wire & Crocodile clamp

Sand buckets with stand (Each of 3 buckets)

Supply erection and painting of Fencing for transformer yard and DG yard. The panels shall be bolted to 75 mm. Dia M.S. poles erected on masonry plinth. The fence shall be painted to appr...

Providing Water- 9 Ltr -Stored Pressure Supply and installation of 9 Ltr Water type Fire Extinugisher Stored

Pressure Type Pressu...

ll FIRE HYDRANT SYSTEM Supplying Installing testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet stop valve spindle and cast iron hand wheel. It has a fem...

Supplying Installing testing and commissioning of 63mm mm dia double

headed Gun mental Hydrant Valve with flanged inlet 2Nos stop valve

spindle and cast iron hand wheel. It has a 2 Nos female instanta...

Supplying Installing testing and commissioning of Gun metal Branch pipe

size of 63mm dia x19mm dia as per IS 903 complete including cost of

materials labour usage charges of machinery complete as per

Supplying Installing testing and commissioning of Reinforced Rubber

Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded

with one Each of male and Female lnstantainious Gun metal cou...

Supplying Installing testing and commissioning of Hose cabinet made out of

18 gauge M.S.sheet with double glass door with lacing arrangement and

painted with two coats of Fire red Enamel paint at oute...

Supplying Installing of M.S. Pressed reel of 600mm dia swinging type

motion which allows a 180 swing and conforms to IS:884/85 or Aluminium

fitting Single Piece Compact Type. including cost of materia...

Supplying Installing testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore reinforced of natural/synthetic

fibres a rubber cover finish shall be smooth fluted or fabri...

Supplying Installing testing and commissioning of pendent Type/Upright Type Standard Response Standard Coverage Sprinkler K5.6(80)1/2”NPT 68 Degree C Chrome finish UL listed. (PWD ELEC. SR2023-24 V...

Fire Flydrant System Supplying installing testing & commissioning approved make heavy duty

(Class 'C') GI pipes and fittings confirming to IS 1239 PI & II Malleable

Specials such as tees long radius...

25 mm dia. complete

Supplying Installing testing and commissioning of 150mm dia 4 way Fire

brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia.

including cost of materials labour usage charges of machinery ...

Supplying Installing testing and commissioning of 100mm dia 2 way Fire

brigade inlet connection of 2 nos. 63 mm dia. including cost of materials

labour usage charges of machinery complete as per speci...

Supplying installing testing and commissioning of PN16 CI butterfly valves

of confirming to IS 13039 with necessary nuts & bolts etc. complete ---- etc. complete as per specificaiton with all lead an...

ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM Supply installation testing and commissioning of addressable peer to peer

Networkable analogue addressable type fire alarm control panel with

minimum 1500...

Supply Installation Testing & Commissioning of Network Active Repeater

Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD

shall Display all events / detectors devices status of comp...

Supply installation testing and commissioning of analogue addressable

Smoke Sensor detector and standard base (For Detectors/Device without

inbuilt isolator Fault Isolator or Isolator base to be provi...

Supplying Installing testing and commissioning of Response Indictor

constists of twin LED with electronic circuit work on 24 DC enclose in PVC

retangular. complete including cost of materials labour u...

Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured

cable (PWD ELEC. SR2023-24 Volume-6).

Providing and Fixing Fire force board size of 3'x2' made out to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials labour usage charges...

Supplying of two bucket stand alongwith buckets. Complete (PWD ELEC. SR2023-24 Volume-6).

Supplying and fixing of Fire duct Shutter fabricated out of M.S.sheet and

frame door shall befixed with 4 mm thick Glass suitable Rubber beading

and Locking arrangement. Rate shall be includes all fas...

Supply installation testing and commissioning of 3 in 1 ( Hooter + MCP + P.A Speaker).

Supplying Installing testing and commissioning flow switch installed on the sprinkler main distribution line connected to the main sprinkler annunciation panel.

Providing ABC Powder Map 50 6Kg Supply and installation in position testing and commissioning 6kg Fir e

Ex tinguisher Mono Am...

2 Kg C02 Gas Type Fire Extinugisher Supply and installation of 2 Kg C02 Gas Type Fire Extinugisher Squeeze

grip type used Unused...

Providing Aqueous Film-Forming Foam - 9 Ltr Supply and installation of 9 Ltr Fire Extinugisher Aqueous Film-

Forming Foam Type Stored...

Supply erection testing & commissioning of electrical motor driven end

suction back pull out centrifugal pump capable of deliveringadequate LPM

at required head. when running at 2900 rpm directly coup...

Supply installation testing & commissioning of diesel engine driven pump

horizontal mounted Horizontal spiltcase centrifugal single stage pump

capable of delivering required flow at required head when...

Supplying Installing testing and commission of Electrical Booster pump

Control panel for fire fighting system consisting of Feeder For 1 No. of

Booster pumps :-1 no of 32 A TPN MCCB (50 KA with 12.5 H...

ll FIRE HYDRANT SYSTEM Supplying Installing testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet stop valve spindle and cast iron hand wheel. It has a fem...

Supplying Installing testing and commissioning of Gun metal AIR

RELEASE VALVE SIZE OF 25mm dia including cost of materials labour

usage charges of machinery complete as per specifications. Complete (...

Fire Flydrant System

Supplying installing testing & commissioning approved make heavy duty

(Class 'C') GI pipes and fittings confirming to IS 1239 PI & II Malleable

Specials such as tees long radius b...

Supplying Installing testing and commissioning of 150mm dia 4 way Fire

brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia.

including cost of materials labour usage charges of machinery ...

Supplying Installing testing and commissioning of 100mm dia 2 way Fire

brigade inlet connection of 2 nos. 63 mm dia. including cost of materials

labour usage charges of machinery complete as per speci...

Supplying installing testing and commissioning of PN16 CI butterfly valves

of confirming to IS 13039 with necessary nuts & bolts etc. complete ---- etc. complete as per specificaiton with all lead an...

Supplying installing testing and commissioning of PN16 CI "Non Return

Valve " confirming to IS 13039 with necessary bolts and nuts etc complete

includes cost of all materials labour charges with all l...

supply and installing testing and commissioning of CI " Y " stainer

confirming to IS standard with necessary bolts and nuts complete includes

cost of all materials labour charges with all lead lift lo...

Supply erection testing and commissioning of Fire Fighting panel cubicle

type made out of 14/16 Swg MS CRCA sheet which is derusted degreased

phosphated and passivated with angle iron skeleton or shee...

ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM

Supply installation testing and commissioning of addressable peer to peer

Networkable analogue addressable type fire alarm control panel with

minimum 1500 C...

Supply Installation Testing & Commissioning of Network Active Repeater

Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD

shall Display all events / detectors devices status of comp...

Supplying Installing testing and commissioning of Response Indictor

constists of twin LED with electronic circuit work on 24 DC enclose in PVC

retangular. complete including cost of materials labour u...

P.A.System amplifier 250W RM S out put with complete wiring and

controls accessable form front (PWD ELEC. SR2023-24 Volume-6).

Supplying Installing testing and commissioning of MIKE suitable to

I.A.System. Complete. (PWD ELEC. SR2023-24 Volume-6).

Supplying of two bucket stand alongwith buckets. Complete (PWD ELEC. SR2023-24 Volume-6).

Supplying Installing testing and commissioning ICV. installed on the sprinkler main distribution line connected to the main sprinkler annunciation panel located in the ground floor.

Construction of VDCC Bank Training Centre Building at Vijayapur

First Floor Work

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m heigh...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

ROOF BEAMS Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

RCC ROOF SLAB Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. T...

Reinforcement for RCC works Steel Fabrication. Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cuttin...

STAIRCASE AND LIFT ON SE SIDE Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Internal Wall Plastering Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffo...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Ceiling Plastering Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, prov...

STAIRCASE ON SE SIDE Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route ...

Wall Putty Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth compl...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Granite stone flooring Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 ...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...

MAIN BUILDING Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side ...

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

DOOR LOCKS Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Tower Bolt long ( 2 bolts/ Door shutter)-Brass Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Handle (1 Handle/Door shutter)-Brass Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm

Providing and fixing bright finished brass butt hinges with necessary screws etc.: complete125x85x5.5 mm (heavy type) :

Tower Bolt (Brass) (2 Bolt/Door Shutter) Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200 x 10mm

Hinges (4 Hinges/Door)-Brass Providing and fixing bright finished brass butt hinges with necessary screws etc.: 125x70x4 mm (ordinary type)

Door Stopper (1 /Door Shutter) Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Door closer (1 /Door Shutter) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

MAIN BUILDING Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and s...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

MAIN BUILDING Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complet...

UPVC 2.5 Track Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(The...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6 12 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specifie...

AUDITORIUM Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a...

AUDITORIUM Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

POST TENSION CONCRETE WORK

A) Design Codes

The design is in accordance with IS: 1343-1980, IS 456, BS8110: The Structural Use of

Concrete, 1997 and TR43.

B) Pre - Stressing System & Materials

PHE WORKS Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous china

flushing cistern & C.P. flush bend with fitti...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing unplasticised PVC connection pipe with brass unions : 20 mm nominal bore

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete

Providing and fixing Stainless Steel Grab Bar 600 mm Long with all concealed fitting arrangements & all necessary accesories complete - Class - Premium

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre

long with S.S. triangular plate to Eureopean type W.C. of quality and make

as approved by Engineer - in - charge.

Sanitary piping - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfec...

PVC pipes 75mm dia., 6 kg/sqcm & class 3

PVC pipes 110mm dia., 6 kg/sqcm & class 3

PVC pipes 160mm dia., 6 kg/sqcm & class 3

WATER SUPPLY - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes j...

25 mm nominal dia pipes

32 mm nominal dia pipes

32 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

20 mm nominal bore

25 mm nominal bore

ELECTRICAL WORKS : FIRST FLOOR LTG & RP PANEL

1 Nos. 160 amp FP On load Manual Change over switch (Two incoming Supply, installation,testing and commissioning of from Main EB Supply, install...

DAS Specification Compact RMU (VCB/SF6 Type) as per IEC-62271The DAS RMUs shall have the following in addition to the Standards:DC motors, Numerical Relays, Multi-functional meters, fault passage indi...

HT & LT Metering Equipment 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Mete...

HT Cable Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) 3x185 to 3x240 Sqmm

2.5 to 25 Sqmm (Single/3.5/4 Core)

35 to 95 Sqmm (3.5/4 Core)

120 to 240 Sqmm (3.5/4 Core)

Making and Fixing pot head for HT Cable only

Heat shrinkable Type Terminations

3x185 to 3x240 Sqmm

Heat shrinkable Straight Through Joint Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff3x185 to 240 Sqmm HT C...

120 to 240 Sqmm

300 to 400 Sqmm

Heat shrinkable Straight Through Joint HT UG Cable Cable Joint and wiring (for HT & LT UG Cable) 3x185 to 3x240 Sqmm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm)

35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm)

70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm)

120 Sqmm, 3.5 Core, (23 GI Strips - 4 x 0.8 mm)

240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm)

300 Sqmm, 3.5 Core, (32 GI Strips - 4 x 0.8 mm)

Compression type Aluminium Tubular in Line Connector for Aluminum Conductor Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 Epoxy Type Epoxy Terminating Kit (Pothe...

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE CableHeat Shrinkable Type Transition Jointing Kit for XLPE Cable 11 kV, Jointing & Cable Termination Kit as per IS-13573 3x240 Sqmm

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE

Cable3x240 Sqmm

Optical Fibre Cable (OFC) and its Accessories Rod Earthing Pipe Grounding Grounding Material 48 Fibre OFC

Miscellaneous Materials

RCC Hume Pipe 2000 mm long 150 mm Dia

RCC Hume Pipe 2000 mm long 200 mm Dia

Cable Covering Tile 125x250x40 mm

PVC CONDUIT & ITS ACCESSORIES Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adh...

25 mm dia 2 mm thick

32 mm dia 2.5 mm thick

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC J...

25 mm dia 2 mm thick

Supplying heavy gauge PVC Conduit Pipe .... dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing ...

upto 50 mm conduit CC floor

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required.

Supplying PVC flexible co...

Supplying Galvanized steel flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 30...

Supply and laying of under floor (concealed) raceways manufactured from 1.5mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 2...

75 x 38 x 2500mm, 1 compartment

Supply and laying of under floor junction boxes shall be of three-piece construction Basebox, frame and load plate.Base boxshall be robust in its construction manufactured from 1.5mm thick zero spangl...

For (50-200x38mm) duct.Dimensions:272x272x60mm. 10 mm Recess

For (50-300x38mm) duct.Dimensions:372x372x60mm. 10 mm Recess

Supply and laying of of RFT raised floor trunking system-Junction, for raised Flooring For (50-100x38mm) duct.Dimensions: 170 mm x 170 mm x 56 mm

For (50-200x38mm) duct.Dimensions: 240 mm x 240 mm x 56 mm

For (50-300x38mm) duct.Dimensions: 340 mm x 340 mm x 56 mm

WIRES & CABLES Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neut...

Medium point above 3m upto 6m from tapping point to out let

Long point above 6m upto 10m from tapping point to out let via

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase...

Medium point above 3m upto 6m from tapping point to out let

Long point above 6m upto 10m from tapping point to out let via

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...

SWITCHES, SOCKETS & ACCESSORIES Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet an...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., compl...

6A Two Way Switch

Stepped Fan Regulator Two Module

16A One Way Switch

6/16A Universal Socket

TV/Telephone Socket

RJ45/I.O Outlet Cat-6

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC

supply & completely wired on existing box.

Supplying ......way plastic gang box and fixing using necessary

wooden/ rawl/phill plugs and screws. 1 Way Gang Box

2 to 4 Way Gang Box

6 to 10 Way Gang Box

Supplying and fixing of metal clad industrial plugs and

sockets. 2pole+earth 250V PLUG 3pole+earth 440V PLUG 2pole+earth 250V SOCKET32A

3pole+earth 440V SOCKET

POLES & HIGH MAST Fabricating, supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two ...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for b...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Fabrication, Supplying, Erection, Te...

CONTROL SWITCH GEARS & ACCESSORIES Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 wi...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing s...

III - Double Door

III - Double Door

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/

FANS & AIR CONDITIONERS Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

Supplying capacitor type ceiling fa...

Supplying wall mounting fan suitable to operate at single-phase 230v AC. supply.

48" Sweep 5 Star (1200 mm)

NETWORKING & TELECOMUNICATION

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.

Supplying & Fixing of switch mounting rack with power manager & Cable manager.

32U with 650mm depth

Supplying & Fixing of Power strip

Supplying & Fixing of Fan

Supplying fixing of Network Switches

24 Port Gigabyte (manageable)

24 Port 10/100 Switch

Supplying & fixing of I/O socket with back box

Supplying & fixing of I/O socket with back box

Supplying & Fixing of ... ms Cat 6 Patch Cable

Supplying & Fixing of ... ms Cat 6 Patch Cable

Supplying & Fixing of ... ms Cat 6 Patch Cable

Supplying & Fixing of Patch panel for LAN cabling

24 Port 10/100/1000 patch panel

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.

DIESEL GENERATOR SET

Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as...

Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged...

LUMINAIRS / LIGHT FIXTURES ACCESSORIES

Supplying & fixing retrofit type-PL- LED Lamp W LED

linear source with CCT 6500 degree K, CRI 70%. efficacy

LED light fitting 1 x 4' - 36/40 W

Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with ...

LED square or round down light 15-18W

LED Street light.

Supply of LED Streetlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of ...

LED Flood Light.

Supply of LED floodlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of a...

Supply of LED Bollard light fitting of ...W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diff...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.

MAINTENANCE WORKS

Supplyingfixingandwiringearthelectrodeforgroundingoflifts,transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopoftheearth...

25 x 3 mm GI strip

25 x 6 mm GI strip

40 x 6 mm GI strip

50 x 6 mm GI strip

25 x 3 mm Copper strip

25 x 6 mm Copper strip

50 x 6 mm Copper strip

600 x 600 x 3 mm Copper plate

2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 150 x 50 mm

Supplying & Fixing Chemical earthling for grounding. Conduits,ICcut-outs & other equipments back fill compound which is non-corrosive,thermally conductive, potential to per missiblelimits ,superi or F...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin ...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of a...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Fixing a ...

FIRE FIGHTING WORKS Providing Water- 9 Ltr -Stored Pressure Supply and installation of 9 Ltr Water type Fire Extinugisher, Stored

Pressure Type, Pressur Gauge, Gross Weight 15.1kg. empty weight 6.1...

ll FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia doubleheaded Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve,spindle and cast iron hand wheel. It h...

Supplying Installing, testing and commissioning of Gun metal Branch pipe

size of 63mm dia x19mm dia as per IS 903 complete including cost of

materials, labour, usage charges of machinery complete as p...

Supplying Installing, testing and commissioning of Reinforced Rubber

Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded

with one set of male and Female lnstantainious Gun metal cou...

Supplying Installing, testing and commissioning of Hose cabinet made out of

18 gauge M.S.sheet with double glass door with lacing arrangement and

painted with two coats of Fire red Enamel paint at out...

Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type

motion which allows a 180 swing and conforms to IS:884/85 or Aluminium

fitting Single Piece Compact Type. including cost of materi...

Supplying Installing, testing and commissioning of 19mm dia 40.0m

length hose with rubber lining smooth bore, reinforced of natural/synthetic

fibres, a rubber cover finish shall be smooth, fluted or f...

Supplying Installing, testing and commissioning of, pendent Type/Upright Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL listed. (PWD ELEC. SR...

Supplying Installing of Horizantal side wall Type ,Standard Response

Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome

finish, UL listed. (PWD ELEC. SR2023-24 Volume-6).

Fire Flydrant System Supplying, installing, testing & commissioning approved make heavy duty(Class 'C') GI pipes and fittings confirming to IS 1239 PI & II, MalleableSpecials such as tees, long radiu...

25 mm dia. complete

Stainless steel braided flexible pipe (hose) for dropping sprinklers below

false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm

dia with union / reducer collar, clamps etc. as re...

Supplying, installing , testing and commissioning of PN16 CI butterfly valves

of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lea...

ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM Supply, installation, testing and commissioning of analogue addressable

Smoke Sensor detector and standard base (For Detectors/Device without

inbuilt isol...

Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured

cable (PWD ELEC. SR2023-24 Volume-6).

Providing and Fixing Fire force board size of 3'x2' made out to Acrylic sheet

of 3mm thick and fixing with Stainless Steel finished studs etc. complete

including cost of materials, labour, usage charg...

Supplying Installing, testing and commissioning of Public address system

(Two way comminication type) as per requirement of Fire Force authority

and which Generally comprise of Supplying Installing, t...

Supplying and fixing of Fire duct Shutter fabricated out of M.S.sheet and

frame, door shall befixed with 4 mm thick Glass, suitable Rubber beading

and Locking arrangement. Rate shall be includes all f...

Supply, installation, testing and commissioning of 3 in 1 ( Hooter + MCP + P.A Speaker).

Supply, installation, testing & commissioning of Beam Detector with base , junction box and other accessories as required and detectors shall be UL listed.

Supplying, Installing, testing and commissioning flow switch installed on the sprinkler main distribution line connected to the main sprinkler annunciation panel. 25 mm