ROAD WORK

Amount

Uprooting of jhunds i/c back filling, ramming & dressing.

Earth work in filling by manual labour or machine i/c lift upto 1.50m & lead upto 30m. With ramming & dressing.

Brick Edging on both side of the road of M-150 bricks 7 cm. wide, 11cm. Deep, laid with mud mortar i/c labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the engineer in- charge.

Providing, laying Spreading and compacting machine crushed stone ballast of approved Quarry of 90-45 mm size to WBM of G-1 specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tone in stages to proper grade and camber, applying and brooming, crushable screening material i.e stone dust to fill-up the interestices of coarse aggregate, watering and compacting to the required density i/c cost of all materials, T&P as per MORD Specification Clause 404 (By Manual Means)

Providing, laying Spreading and compacting machine crushed stone ballast of approved Quarry of 63-45 mm size to WBM of G-2 specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tone in stages to proper grade and camber, applying and brooming, crushable screening material i.e stone dust to fill-up the interestices of coarse aggregate, watering and compacting to the required density i/c cost of all materials, T&P as per MORD Specification Clause 404 (By Manual Means)

Providing, laying Spreading and compacting machine crushed stone ballast of approved Quarry of 53-22.4 mm size to WBM of G-3 specification including spreading in uniform thickness, hand packing, rolling with power roller 8-10 tone in stages to proper grade and camber, applying and brooming, crushable screening material i.e stone dust to fill-up the interestices of coarse aggregate, watering and compacting to the required density i/c cost of all materials, T&P as per MORD Specification Clause 404 (By Manual Means)

Providing & applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface spraying primer @ 0.60 kg/sqm. Using mechanical means as per MORD technical specification Clause - 502

Providing & applying tack coat with Bitmen emulsion V.G. 10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared granular surface cleaned with Machenical Broom as per MORD technical specification Clause - 503

Providing laying & rolling of open graded Premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm Aggregates using VG - 10 grade Bitumen to required line, grade & level to serve as wearing coarse on a previously base as per MORD specification no. 508

Providing and laying seal coat by manual means with VG -10 bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per Technical specification Clause - 510

Shiva Engineers