SPECIAL REPAIR TO BLDG NO P 490 OR MESS SR TO TOILET AND BATHROOM OF BLDG NO TO 81 AND PROVN OF 02 X SEPTIC TANK ALONGWITH SOAKAGE WELL AND ALLIED INFRA OVERFLOW TANK OF BLDG NO TA 194 UNDER AGE BR I OF GE 865 EWS LEH

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from frame) area n.exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work/pcc work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost of Govt complete all as specified and directed by Engr-in-Charge.

All as per Srl Item No 1 here in-above but exc 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed by Engr-in-Charge

Taking down chowkhat or frames exc 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed by Engr-in-Charge

Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engr-in-Charge

S&F IInd class hardwood as in plain solid straight chowkhats wrought framed rebated on the solid put together with glue pinned at joints complete all as specified and direced by Engineer-in-Charge.

S & F 35mm thick 2nd class hardwood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and direced by Engineer-in-Charge.

S & F 35 mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and direced by Engineer-in-Charge.

S & F 30mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and direced by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of single side Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails having one side feathered edge and on other side 10mm 90 degree bent edge with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown on Srl Page no 146 of SSR Part-II 2020 with the size of door shutter all as specified and as directed.

S&F Solid factory made PVC Door frame of size 50mmx47mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, supply and fixing in opening as per specification and drawings and incluiding making good disturbed surfaces complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete complete all as specified and directed by Engr-in-Charge.

S&F of powder coated aluminium grill of 6mm thick with F/U type channel for windows complete complete all as specified and directed by Engr-in-Charge.

M&L for plain sheet glass 4.80mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

S&F in repair 100mm long mild steel medium weight but hinges cold rolled.complete all as specified and direced by Engineer-in-Charge.

S&F in repair 150mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and direced by Engineer-in-Charge.

S&F in repair 100mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and direced by Engineer-in-Charge.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direced by Engineer-in-Charge.

S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and direced by Engineer-in-Charge.

S&F in repair 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and direced by Engineer-in-Charge.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and direced by Engineer-in-Charge.

M&L PCC 1:3:6 type C1 (using 20mm graded aggregate) as in anchoring hold fast, bed block and like complete all as specified and directed.

M&L for precast cement concrete block masonary type C-1 , (using crushed stone 20mm graded aggregate) set and jointed in cement mortar 1:6 exc 10cm in width including demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and direced by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:6 on other than fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 5mm thick in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of new plaster surface of wall and applying two coat of cement base paint complete all as specified and direced by Engineer-in-Charge.

M&L for preparation of new concrete/plastered surface of any description and including 3mm thick wall care putty and applying two coat of distemper oil emulsion over a coat of primer on wall surface complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new concrete/plastered surface of any description and applying two coat of distemper oil emulsion over a coat of primer on ceiling surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preperation of new or previously untreated wooden surface of any description over 10cm in width or girth and applying two coats of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old untreated steel surface of any description over 10cm in width or girth and change of existing colour including removal of scaled paint and applying one coat of synthetic enamal paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old untreated wooden surface of any description over 10cm in width or girth and change of existing colour including removal of scaled paint and applying one coat of synthetic enamal paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated surface of wall by complete removal of existing treatment and applying two coats of oil bound distemper including 3 mm thick wall care putty over a coat of primer complete all as specified and as directed by Engr-in-Charge.

M&L for prepration of old decorated plastered/unplastered surface of wall of any description by washing rubbing down and applying two coats of cement base paint complete all as specified and direced by Engineer-in-Charge.

Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying two coats of white wash on walls complete all as specified and directed by Engr-in-charge.

Preparation of old surfaces of ceiling and applying two coats of white wash on ceiling surfaces complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed by Engr-in-charge.

S & F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n ot exceeding 0.5 Sqm in each pane complete all as specified and as directed

S&F Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed by Engr-in-charge.

S & F in repair Galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for vitrified ceramic tiles 10mm thick (light shade) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and screed bed 15mm thick in CM 1:4 for laying floor tiles all as specified and directed.

M & L Non - skid coloured Ceramic tiles 7 to 8 mm tick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over screed bed 15mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed

M & L glazed (coloured) ceramic tiles of size 350mm x 250mm x 7/450x350x7 mm thick, as on vertical surfaces, over 10 mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles all specified and directed

Demolation of stone slab laid bedded and pointed in motar and tiles of any description as specified and directed by engr in charge

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl screed bed or bedding layer of cement Mortar (1:6), 20 mm thick for laying floor finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish all as specified and directed by engr in charge.

M&L Machine cut Kota stone slab flooring 20-25mm thick as in skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete incl 10mm thick plaster in CM 1:6 as specified and directed by EIC.

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge.

Demolition of un-reinforced cement concrete in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) as directed

M & L 75mm thick plain cement concrete 1:2:4 type B-2 (using 20mm graded stone aggregated) as in plinth protection etc finishing cement concrete surfaces even and fair without using extra cement complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections and set aside for re-use or removal to store complete all as specified and directed by Engr-in-charge.

Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to storecomplete all as specified and directed by Engr-in-charge.

S & F 20mm 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as per manufacture instructions and as directed by Engineer in Charge.

S & F 25 mm 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.complete all as per manufacture instructions and as directed by Engineer in Charge.

S & F in repair vitreous China wash basin, white, flat back, size 630 x 450 mm excluding Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm with plug washers and wastes including beding in CM on to dwarf wall or including fixing cantilever bracket and connection union to waste pipe upto 0.5 sqm each complete all as specified and directed by Engr-in-charge.

S & F in repairs 15mm bib taps fancy type with chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.

S & F in repair 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S & F in repair 15mm bore stop valves, chromium plated with long shank and cup (concealed Each type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-charge.

S & F in repair, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed by Engr-in-charge.

S & F in repair grating 125MM dia with waste hole of PTMT complete all as specified and directed by Engr-in-charge.

S & F in repair towel rail 600mm long or PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (min wt 190 Grm) complete all as specified and directed by Engr-in-charge.

S & F in repair 1000 litres capacity rotational moulded polythylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old existing water tank complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed by Engr-in-charge.

S&F in repairs Vitreous China squatting pan 'Orissa' pattern,size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) with PVC (SWR)110 MM 'S' trap and all as directed by Engineer-in-Charge.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets,flushing pipe including of brackets complete all as specified and directed by Engr-in-charge.

S&F in repairs Waste coupling of PTMT for 32mm bore dia pipe (half or full threaded) minimum weight 32mm -45 gms/40mm -60gms) complete all as specified and directed by Engr-in-charge.

Dismantling of CI or reinforced concrete /PVC of bore jointed in cement mortar and taking out of trenches complete all as specified and directed by Engr-in-charge.

S/F 110 mm dia (SWR) bend any radius complete all as specified and directed by Engr-in-charge.

S&F 110mm bore PVC (SWR) pipe single socked in any length with rubber ring joint, laid in trenches or in floor complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed by Engr-in-charge.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvant cement complete all as specified and directed by Engr-in-charge.

Demolition of reinforced cement concrete in any position not otherwise specifically provided complete all as specified and directed by Engr-in-charge.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded aggregate) for slab supported on walls , beams and columns in floors , roofs, landings, shelves and the like complete all as specified and directed by Engr-in-charge.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed by Engr-in-charge.

M&L french polishing one or more coats on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and directed by Engr-in-charge.

M&L for Cement concrete type D-2, 1:4:8 (using 40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and directed by Engr-in-charge.

M&L for Chequered cement concrete tiles 20cm X 20cm X 25mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) complete all as specified and directed by Engr-in-charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-charge.

M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, laying UG cables, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out as specified and directed

All as per item No 84 here-in-above but exc 1.5m or part thereof in depth beyond the first 1.5 m but n exc 3.0m deep and getting out all as specified.

M&l for PCC type D2 (1:4:8) using 40mm graded crushed aggregate as mass concrete and filling of foundation complete all as specified and directed by Engr-in-charge

M&L pre-cast cement concrete (using 20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge

M&L pre-cast cement concrete, Type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) solid building block or slabs 10cm thick (with plain or interlocking joints as directed ) and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge

M&L Walling of random rubble uncoursed stone masonry, uncoursed well bonded laid dry in retaining wall abutment and similar work all as specified and directed.

M&L Walling of random rubble stone masonry, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 all as specified and directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping ,mass concrete complete all as specified and directed by Engr-in-charge

M&L form work to soffits of suspended flat slabs such as roof slabs ,floor slabs,landings and similar works (smooth finished flat surface of concrete) not exceding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge

M&L form work to fair finshed edges of concrete flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and directed by Engr-in-charge

M&L for precast cement concrete Type B1, 1:2:4 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed

M&L for 15mm thick rendering on other than fair faces of brick works/stone masonry work finished even and smooth without using extra cement in cement mortar 1:4 with water proofing compound @ 3% complete all as specified and as directed. Note: WPC shall be measured and paid separately.

S/F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls and vent pipe as specified and directed by Engr-in-charge

S & F PVC (SWR) 110 mm bore 'P' Trap complete all as specified and directed by Engr-in-charge

M & L Concrete bed in 1:3:6, type C-2 (using 40mm graded stone agg) to drain pipe of bore 150 mm including packing under ,and haunching against the sides of pipe after they laid and tested; complete all as specified and directed by Engr-in-charge

Returning, filling in ,including spreading,levelling ,watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed by Engr-in-charge

Removing excavated soil material n, exc 50m and depositing where directed at a level n, exc 1.5 m above the starting point complete all as specified and directed by Engr-in-charge

Supply only Integral waterproofing compound complete all as specified and directed by Engr-in-charge

Supply only broken bricks for loose filling ,of gauge 80mm to 150 mm graded as specified and directed.

M&L for hardcore of gauge n.exc 63mm , deposited , spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engr-in-charge

M& L for Cement concrete 1:3:6, type C2 (using 40mm graded aggregate) in surface channel and drain complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in any description and any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed by Engr-in-Charge.

Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work. complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

All as per Srl item No 110 here-in-above but on ceiling complete all as specified and as directed

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

M&L for 10 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings complete all as specified and directed by Engr-in-charge.

S&F for 40 mm thick flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides, supply and fixed to chowkats, complete all as directed by Engr-in-charge.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs, excluding hinges,lock strike plate etc, complete all as specified

M & L for welding in repairs exc 2.5 cm but not exc 5cm in length not exc 6mm thick metal complete as specified by Engr-in-charge

M&L sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge.

M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories and dismantling of existing old water tank complete all as specified.

S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as directed by Engr-in-charge.

S & F 15mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge) including taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store complete all as specified and as directed.

S&F PVC (SWR) 'S’ trap of 125/110 mm bore complete all as specified and directed by Engr-in-Charge.

M&L for Cast iron Nahani trap 75mm in repair with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

M&L for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes laid in trenches and jointed all as specified

M&L for PCC 1:4:8 TYPE D-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe including dismentling

S&F PVC connectons 15 size with PTMT nuts (length 600mm) complete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engr-in-Charge

S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins complete all as specified and directed.

S & F in repairs, 40mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and directed by Engr-in-Charge

M&L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor finished even and fair with out using extra cement complete all as specified and directed by Engr-in-Charge

M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

S&F mild steel rolled sections in main and cross beams,hip and jack rafters ; purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

All as item No 143 here-in-above but except sheeting any thickness.

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges, valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified

M&L for preperation of new plastered wall surface of any description and applying three coats of white wash complete all as specified and as directed.

M&L for preperation and removal of old Steel / CGI Sheet surface any description over 10cm in width or girth and applaying two coats of synthetic enamal paint complete all as specified and directed by Engr-in-Charge

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

S&F in repairs Soap dish Cromum plated complete all as specified and directed by Engr-in-Charge

S&F in repairs towel Hanger with 6 Nos of pin and 600mm long chromium plated etc complete fitted as per specified and directed by Engr-in-charge

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

M&L for Point wiring complete with 1.5Sq.mm nominal area of copper conductor FRLS multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan/Bell point point controlled by one way switch

One 3 pin socket out let 5 Amp on independent board complete all as specified and directed.

One 3 pin socket out let 5 Amp on the same board with other switches complete all as specified and directed.

All as per Srl Item No 152 here-in-above but using cable of size 4 Sqmm complete all as specified and directed by Engr-in-Charge.

Supply and replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed.

Supply and fixing in replacement of switch Socket combination 5 pin 5 & 15 Amps flush type 230 volts complete all as specified and directed.

Supply and fixing in replacement of switch Socket combination flush type 3/5 pin 5/6 Amps 230 volts complete all as specified and directed.

Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as specified and directed.

Supply and replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement of MCCB, TPN 160 Amps, 25 KA, adjustable type, 4 pole 415 Volts, thermal magnetic with rupturing cap 16 KA, ISI marked, complete all as specified and as directed by Engr-in-Charge. Make as per PS.

S&F in replacement of old UNSV sheet metal enclosure TPN for DBs with 200 Amps bus bar of 4 way 415 volts with blank plate double door complete all as specified and as directed by Engr-in-Charge. Make as per PS.

Supply and fix in replacement of sheet metal enclosure SPN for DBs double door when MCB's to be used single pole & neutral 240 Volt 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure SPN for DBs double door when MCB's to be used single pole & neutral 240 Volt 4 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 5 to 32 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Air circulator PVC body 450 mm sweep complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement street light LED type suitable for working on 230 volts, 50 Hz, AC of 60 Watts complete including all electtrical connection complete all as specified and directed by Engr-in-Charge.

S& F Street light brackets 1.5 mtr long, 40 mm bore, GI light grade with MS clamps complete all as specified and directed by Engr-in-Charge.

S & F PVC insulated, PVC sheathed copper conductor cable 1.5 sqmm 3 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement LED Luminaire 600 mmX600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make- Havells/ crompton / Bajaj

Material and labour for in replacement of earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

M & L for Sub main wiring with two run of 6.00 Sqmm (2x6 Sqmm) 1100 volts grade single core FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x 6.0 sq. mm unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6.00 Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6 Sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit.

Supply and Fixing in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm, 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm, 3.5 core complete all as specified and directed by Engr-in-Charge.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18 CM will be measured and paid for complete all as specified and directed by Engr-in-Charge.

Supply and laying of factory made, machine pressed, unreinforced, precast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN 40 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core complete all as specified and directed by Engr-in-Charge.

Supply & Installation ,testing and Commissioning in replacement of LT Panel cubical type out door floor mounted weather proof totally enclosed, (CPRI approved) factory made and made out of 3 mm thick CRCA powder coated sheet and angle iron complete with bus bar of Aluminium of suitable size for capacity 250 Amps 3 Phase and Neutral 415 Volts 50 Hz mounted on epoxy type insulators with PCC flooring and angle iron base frame complete all as directed by the Engr-in-charge including fallowing accessories:- a) MCCB 160 Amps Cap 4 Pole 36 KA 415 -1 No for( I/C) b) MCCB 63 Amp cap 3 pole 36 KA 415 Volts - 2 Nos c) Digital Volt meter with sellector switch(0-500V) - 02 Set d) Digital Amp meter with sellector switch with necessary CT (0-500A) - 02 Set e) LED indicating lamp - 02 Set Note : (i) The Make of MCCB considered are Havells/Standard/Indo Asian/HPL (ii) The rates deemed to be inclusive of suitable size Aluminium strips from Main I/C MCCBs Main Bus bar and Bus Bar to Outgoing MCCBs complete all as specified and directed. (iii) The design of Panel, Make of complete accessories and drawing of the LT Panel should be submitted by the contractor for pre-approval from the Engineer-in-cfharge before order and execution at site.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead strip 32mmx6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

M/S LEO TRADERS

M/S SHAMSHER ALI SUFI

M/S MUNEER HASSAN AKHON

M/S SONAM RIGZIN

M/S MOHD KARIM