Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹99.9 LAccepted-AOC MUMBAI THANE MAHARASHTRA | L1 | Accepted-AOC Being L1 |
Tender Value
₹95.2 L
EMD Value
₹1.9 L
Closing Date
1 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer
Civil Engineering Division, BARC Trombay, Mumbai
Area development at TVS area and Miscellaneous works for other sea side buildings at North site, BARC, Trombay, Mumbai.
2024_BARC_791963_1
BARC/CED/ET/81/2023-2024 Dated 24.01.2024
Open Tender
Civil Works
Item Rate
365 days
North site, BARC, Trombay, Mumbai.
Please refer tender documents
8 documents required · 8 mandatory
₹0
₹1.9 L
27 May 2024
25 Jan 2024
6 Mar 2024
25 Jan 2024
1 Mar 2024
31 Jan 2024
Amount
Preparation and consolidation of sub-grade (Proof Rolling) with power roller of 8 to 10T capacity including excavating earth to an average thickness of 22.5 cms depth, dressing to camber and consolidating with road roller including making good the undulations etc. and rerolling the subgrade and disposal of surplus earth within a lead of 200 m
Murum filling under floors of specified thickness in layers of not more than 150 mm thickness including supplying required materials and consolidation etc. complete (Murrum to be brought from out side campus of BARC)
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (Proctor density)
Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge
Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels
Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20 mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specification
Extra for RCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .
Providing Reinforcement steel for reinforced cement concrete using TMT bars of specified grades all dia bars. at all levels including preparation of reinforcement schedule, cutting, bending, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire etc. complete including cost of binding wire, all labour and transporting the steel from departmental stores to site including cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the Department Note : 1. Steel shall be supplied by the department at the rate of ₹ 47000 /MT as indicated in schedule -A . 2. Contractor has to make own arrangement for loading / unloading & carrying from dept. store.
Supplying , cutting to shape and fixing 90 mm diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site.
Providing and fixing in position premoulded jointer filler 140mm wide & 20mm thick in expansion joints.
Providing and laying in position bitumen hot sealing compound for expansion joints using approved make.
Providing, centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels
For Sub Structure
For Super Structure
Extra for circular & curved shuttering over item no. 13
Providing and constructing Brickwork in cement mortar 1:6 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
Providing , painting and finishing walls with two coats of exterior emulusion paint of approved make on stone masonary of required shade over new work including base coat of water proofing cement paint, preparation of the surfaces, scaffolding complete, as per specifications and as directed by the Engineer-in-charge.
Dismantling Bituminous road including stacking of serviceable materails and disposal of unserviceable materials within 200 m lead
Providing and laying 300 mm Dia RCC Hume pipe class Np2 of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.
Providing STRUCTURAL STEEL WORK USING ANGLES, CHANNELS, JOISTS AND OTHER SECTIONS, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Project Engineer. Up to and including 300mm Joists, 350mm channels, and below sections using materials of conforming to IS:2062 only. Notes : (1) All test reports to be provided along with the supply of the materials. (2) Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. (3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (4) Edges shall be grinded to uniform smooth finish. (5) Full length of welding shall be carried out as directed by the Engineer-In-Charge. (6) Electrodes conforming to IS 814 shall be used. Tentative / suggested make for electrode for guidance of bidder(s) : M/s. Advani Oerlikon, ESAB India, Indian Oxygen, D&HSECHERON or approved equivalent
Lead charges for soil lead exceeding 4 KM not exceeding 5 KM, by mechanical transport including loading,unloading, stacking /levelling etc. Note: The rate is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil a from corresponding STACK / TRUCK Measurement.
Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm.
Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead.
Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge.
Dismantling flushing cistern/ W.C. of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead
Removing bitumen based water proofing treatment form terrace, chajjas etc. dosposing within 50 mtr .
Dismantling G.S Sheet / FRP Sheet / AC Sheet roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead.
Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item)
Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge
Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations : (1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water (2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. (3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush. (4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) (5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item.
Providing and repairing to internal plaster in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and repairing to external plastering in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls ncluding admixtured with approved Water proofing compound @ 2% by weight of cement used and as per manufacturer's specifications ,sieving of sand to required fineness complete including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and fixing Glazed VITRIFIED floor tiles of approved make Using Tiles of size 600 X 600 mm conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.
Providing and fixing 1st quality antiskid ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-incharge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-incharge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
Providing and fixing 1st quality approved make - Digital highlighter 300 x 600mm- wall tiles as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout compound of approved make of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete complete as directed by the Engineer-in-charge.
Providing and Laying Minimum 25 mm thick uniform shade Kotah stone treads and risers of steps, skirting,window sills in single length up to 2.00 metres length slab dado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finish, necessary grooving etc. complete as per specifications, drawings and as directed by the Engineer-in-charge.
Extra for nosing in steps of treads Using Kotah stone
Providing and fixing Minimum 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.
Extra for providing edge moulding to 15-17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.
Providing and fixing FRP door shutters 35 mm thick flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws.
Providing Second class teak wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge
Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.
Providing and fixing pannelled teak wood door shutters (35 mm thick frames and 25 mm thick shutters) using second class teak wood using styles & middle rails 100 mm x 35 mm, bottom rail 200 mm x 35 mm, top rail & lock rails 150 X 35 mm and panelling with 25 mm thick best quality teak wood planks including fixing in existing door frame including ISI marked 100 mm stainless hinges with SS screws complete all as per specifications and as directed.
Providing and fixing C.P teak wood moulded beading (Architrave) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.
Providing and fixing anodized aluminium tower bolts of size 200 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc
Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.
Providing and fixing anodised aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.
Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc. complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.
Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.
Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / cm2 hydraulic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.
15 mm dia G.I pipe
20 mm dia G.I pipe
25 mm dia G.I pipe
Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10 Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge
Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.
Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make Aquaseal model with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge
Providing and fixing White vitreous China wash basin size 550 x 400 mm/ 550 x 420 mm and equivalent sizes with single 15 mm C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge
Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.
Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .
Providing and fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge
Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge
Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge
Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in?charge.
Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 or Cast Iron hubless pipes confirming to IS 15905 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.
75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905
100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905
Providing and fixing Heavy quality PVC waste pipe of 32mm dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge.
Providing and fixing heavy quality 125 mm dia stainless steel / C.P brass grating of approved equvalent make as specified for floor traps /nahani traps all as directed by the Engineer-in-charge.
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Note: 1. The contractor shall provide screws, MS tie rods etc. No extra payment will be made for it. 2. The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 3. All joints shall be of mittered Joints. 4. A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 5. Only Aluminium members alone shall be measured and paid for.
Anodized Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra over Item No. 72.1 for Colour Anodizing
Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters.
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
Providing and fixing glazing With clear float glass panes of 4.0 mm thickness in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
Providing and fixing glazing with frosted glass panes of 5.00 mm thickness in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) .
Supplying, providing and fixing 22 guage stainless steel net (for mosquito prevention) to aluminum grill / frame including cost of drilling holes, cutting, wastages, wooden gutty, stainless steel screws, tools, tackles, labour, etc. all complete as directed by Engineer-in-charge.
Providing and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 Microns with opening size of 80 mm x 66 mm and Minimum weight of 3.13 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-Charge .Aluminium alloy shall be of 6063-T6 with Yield strength of minimum 6.5 kg/ sq.mm. meeting all the technical specifications as per relevant codes and standards. Note: Tentative / suggested make for guidance of bidder(s) - M/s "DECO GRILLE" make, Model No. DG- 102 or approved equivalent
Extra over Item No. 78 for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge
Providing & applying Chemical based water proofing of Modified Acrylic Emulsion Polymer and Elastomeric waterproofing coating meeting technical parameter / specification over terrace slab/ parapet/ side walls etc. at all elevations including polycon based fibrous net all complete including cleaning and preparation of surface and testing by ponding water complete with following operations: 1. Removing of all loose materials by wire mesh and clean entire terrrace with clean water by using water jet wherever required. 2. Opening all visible crack by plaster cutting machine in "V" shape, 3. Diluting binder with water in the Ratio of 1:4 and pour on the bare slab to be treated, 4. Apply binder and cement in the ratio of 1:1 and water to obtain paste like consistency and fill the cracks. 5. Applying bond coat of binder and cement in the ratio of 1:1 to entire terrace. 6. First coat of binder & cement at the rate of 1.48sq.m per litre of Modified Acrylic Emulsion Polymer and Elastomeric waterproofing. 7. Laying polycon based fibrous net (polyester geotextile of minimum 80 GSM) for entire area immediately before drying of first coat to get proper bonding. 8. Applying one more coat of binder & cement above fibre net. 9. Applying 2 coats of Flexcoat -WP @ 2.40 Sq.M per litre with dilution 10% weight of potable water, 10.Test the surface for water tightness. PHYSICAL PROPERTIES: Appearance : Milky white emulsion. Solid content (150°c/ 20 min.) :47.0 ± 0.5% pH : 8.0-10 Viscosity (Brookfield LVF#1/60 @ 25°c) : 160 cps Max. Film test (draw down 250-micron ambient temp.) : Clear, free from bits, Slightly tacky Minimum Film Forming Temperature (MFFT): 10 degree centigrade to 12 degree centigrade Specific gravity of emulsion (typical) : 1.025-1.035 Film casting test @54°c dried overnight on rolling : Flexible, should not crack Note : Tentative / suggested make for guidance of bidder(s) : M/s. Indofil - MC76 or approved equivalent
Providing and fixing precoated Galvalume sheet roofing 0.50 mm Thickness in Single sheet Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in?charge
Providing and applying durable exterior emulsion paint formulated with engineered pure acrylics latex based on nanotechnology, with life of min. 10 (ten) years, having crack bridging ability up to 2.4 mm and superior anticarbonation & waterproofing properties, surface cross linking feature, high resistance to growth of algae, high Dust Pick Up Resistance (DPUR), resistance to fading of colours, protection against bird dropping, good washable property including the cost of materials, spray / roller application, labour, consumables, tool & plants/equipment etc. complete in all respect as per manufacturer’s specifications and as directed by the Engineer - in-Charge. Base coat (main waterproofing coat): minimum 2 (two) coats of fibre reinforced liquid applied membrane (to be applied before top coat) with allowable dilution as per Note below. Top coat: minimum 2 (two) or more coats of Organo-Silicon, UV Cross linking emulsion. Note : 1) Coverage for new surface (sand faced plaster): For Base Coat - approx. 40-45 sq.ft./litre with 1st coat of Base Coat with 30% dilution and 2nd coat of Base Coat with 10% dilution with potable water and for top coat - approx. 55-60 sq.ft./litre with 30-35% dilution with potable water only. 2) Coverage for old surface (sand faced plaster): for repainting on old surfaces, 1st coat of Base Coat with 30% dilution only on repair/patch work and 2nd coat of Base Coat with 10% dilution with potable water on overall surface - approx. of 40-45 sq.ft./Litre prior to 2 coats of top coat application i.e. with 35% to 40% dilution with potable water - approx. 55-60 sq.ft./Litre. 3) Warranty : Minimum 10 (ten) years' warranty against water proofing, paint performance and anti-algal properties. 4) Scaffolding will be paid separately under relevant Item. 5) The paint shall conform to international VOC specifications and shall not contain hazardous materials/ heavy metals / toxic materials. Tentative / suggested make for guidance of bidder(s): For Base Coat - M/s Asian Paints Ultima Protek Duralife or approved equivalent and for Top Coat - M/s Asian Paints Ultima Protek or approved equivalent.
On Plain Plaster surfaces
Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
Lead charges for debris lead Exceeding 4 KM not exceeding 5 KM, by mechanical transport includinmg loading,unloading, stacking / levelling etc. Note: The rate is applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement
Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. Note : (1) The elevational area of the scaffolding shall be measured for payment purposes. (2)The payment shall be made once irrespective of duration of scaffolding.
stage.html
html • 0.04 MB
techsummary_832379.pdf
PDF • 0.24 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_832379.pdf
PDF • 0.29 MB
CEDWO16MsReshmaConstruction.pdf
PDF • 6.92 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .