MAINTENANCE SUNKEN FLOORS AND ALLIED SERVICES AT VARANASI CANTT FOR JUNIOR COMMISSIONED OFFICERS/OTHER RANKS SINGLE LIVING ACCN UNDER GE (EAST) PRAYAGRAJ.

Amount

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) including dismantling tiling having cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) including dismantling tiling having cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

M&L for Brick work with sub class B brick old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agg) as in sub base to flooring hard standing, path etc as in any position and any thickness complete all as specified and directed..

M&L for Plain cement concrete, 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels or drains, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and smooth without using extra cement and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) including scaffolding for G+2 building (upto 10 Mtr height ) external surface complete all as specified and as directed.

Supply only water proofing compound of approved make complete all as specified and as directed..

M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface finished even and smooth without using extra cement on internal surfaces of wall complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling & finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coat of oil emulsion distemper on walls over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer including complete removal of existing treatment complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint in approved colour/shade over a coat of primer after preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 150mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, fixed to wall incl necessary clamp etc complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and as directed.

S&F 150mm PVC (SWR) bends any radius oval complete all as specified and as directed.

S&F 110mm PVC (SWR) bends with access oval door complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and as directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 75 mm bore pipe complete all as specified and as directed.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and as directed..

S&F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and as directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and as directed.

S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed .

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and as directed.

S&F in repair 15 mm size two way bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and as directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and as directed.

S&F in repair 15 mm dia stop valves cast copper alloy chromium plated long shank (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pedestal pan white with 'P' trap, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed. Make Cera Cat No.- F-8030301 or equivalent in Jaquar/ Parryware

S&F in repair Vitreous China urinals half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) with & including Urinal spreader of for fixing with 15 mm dia pipe complete all as specified and directed .

S&F in repair vitreous china wall hung wash hand basin with full pedestal incl padustel white flat back size 515 x 430 x 110 mm excluding taps including brass CP waste coupling with long screwed shank and fly nuts, , chain and plug, porcelain complete all as specified and directed . waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed

S&F in repair Pillar tap, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore, complete all as specified and directed .

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed

S&F in repair Soap dish, fixed to plugs with chromium plated brass screws , mild steel chromium plated of approximate size 100 x 50 x 10 mm , complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

Demolition of PCC(unreinforced) of any description and in any position not specifically provided for sunken/etc complete all as specified and directed.

M&L for Treatment to sunken floor and sides as mentioned below:- (Step-I) - Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II) - M&L for application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) - M&L for 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV) - M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base complete all as specified and as directed. Note:- All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken part of slab complete all as specified and as directed.

M&L for Providing 25 mm thick, cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate in flooring in sunken slab complete all as specified and as directed.

S&F of Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. Including cleats, brackets, etc. confirming to Fe- 290 (Gde E- 165) complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm and not exceeding 4 Sqm each, and removing from site, complete all as specified and directed .

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in- charge.

S&F 2nd class hard wood factory made, plain framed, panelled shutters (two panels), double shutter with lock rail and panel of 9mm BWP commercial ply of size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick fitted to chowkats, complete all as specified and as directed.

Supplied and fixed Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repair for factory made steel ventilators with top hung shutter including hinges, steel peg stay including two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars , including two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, , complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150 mm long aluminium barrel tower bolt, complete and all as specified and directed

M&L for Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed .

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked triple layered, hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210 gms) including dismantling water tanks and removing from site complete all as specified and directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Dismantling brick tiles any size laid bedded and pointed in any mortor complete all as specified and directed.

Preparation of PCC/RCC roof surfaces and then providing 10 mm thick SBR polymer modified plaster in cement mortar 1:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) and applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat), complete all as specified and directed. Make: NitoProof 725 of Fosroc or equivalent product of Pidilite Dr Fixit Super Latex / Asian Paints / M/s MC Bauchemie / CIPY/ SIKA / Thermax / STP. Note: a) The work shall be carried out complete as per manufacture’s specifications and application methodology. Execution shall be done with authorized trained/skilled applicator of manufacturer as per the technical guidelines laid by manufacturer. Company back guarantee of 10 years shall be given by contractor after completion of Water Proofing work before payment. b) Ponding test for 72 Hours shall be carried out by contractor to check any instances of Leakage/Seepage, The results of successfull Ponding Test shall be certified by Engineer-in-charge and User Rep before payment.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L for point wiring One 3 pin socket outlet. 5 amps, independent, with cables 2.5sq.mm size complete with PVC insulated unsheathed, 1100 volts grade cable FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for 5 Amp Socket controlled by one, one way switch, including concealed pressed steel/PVC terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets,etc including 2.5 Sqmm FRLS type PVC insulated unsheathed cable multi standard copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

Ditto -all as item No.76.00 above but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

M&L for point wiring One 3 pin socket outlet. 15 amps, independent, with cables 4 sq.mm size complete with PVC insulated unsheathed, 1100 volts grade cable FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel/PVC terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets etc including 4 Sqmm FRLS type PVC insulated unsheathed cable multi standard copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable solid copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

S&F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.

S&F for 5 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S&F for 5 pin, 15 Amp/ 16 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S&F for switch piano, flush type, 15/16 amps, single pole , one way , 230 volt complete all as specified and directed.

S&F ceiling rose single phase, PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including connection complete all as specified and as directed.

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 380 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans complete all as specified and as directed.

L.K.R.TIWARI CONSTRUCTION (BID ID -3118300)

M/S J J ENTERPRISES (BID ID -3118307)

SHIV SHANKAR MISHRA (BID ID -3103561)

T.THIYAGARAJAN (BID ID -3103800)