Provision of Internal and External Electrical arrangements to the Arangam with Statue to Maveeran Pollan at Jayaramapuram in Modakurichi Taluk in Erode District

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (4 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End )

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 9W LED Bulb and Battern Holder for BH point.

Supply and fixing of 4'20W LED Tube light fitting with Batten (Make : Higher End) with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 1200mm (48") Sweep BLDC ceiling fan complete (HIGHER END) with 2 Module 100 W Fan Step Regulator (HIGHER END) with stepped with 1 meter down rod on the existing fan clamp.

Supply and fixing of 300mm (12")sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 3Nos. 6A two module 5pin socket, 3nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End.

Supply and fixing of 1No. 6/16A two module socket, 1no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 20Amps DP plug and socket in sheet steel enclosure with 32A DP MCB in flush with wall with earth connection.[For AC Plug]

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (In Power Plug)

Supply and fixing of 7Segment 4way TPN MCB Sheet Steel Distribution Board with metal/acrylic door cover flush type / surface type fitted with busbars and neutral links with single or three phase MCB outgoings and seperate 4way provision for accomodating 1No 4Pole incoming MCB/Isolator and another seperate 4Way provision for accodating 1No. 4Pole ELCB/RCD (Totally 8ways in one segment)(3x4 ways in each segment )and seperate provison for MCB/Isolators (Totally 12 Nos) for sub incomers in 3 segments with label holder an provison for taking of cable for size not less than 35 sq.mm with the following in flush with wall earth connection only. 1)63A 4P MCB - 1No 2)63A 4P 30MA RCCB/ELCB-1No 3)63A DP MCB Isolator - 3Nos 4)6A to 32A SP MCB - 12Nos

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 125A 4P MCCB switch as incoming and 6 Nos. 63A 3P MCB, 6 Nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End.

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion (In 5A Plug, Highbay Point and Street Light Control)

Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6sq.mm .PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed inwall and ceiling with contiinuous earth wire connection of 6sq.mm copper wire and making good of the concealed portion with suitable colour. [For 12W SPN DB]

Supply and run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 16 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. [For 4W7segment DB]

Supply and run of 4 of 25 sq. mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed position.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia.GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 4 x 16 sq. mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 16 sq mm PVC armoured LTUG cable, with earth connection.

Supply and Laying of 3 ½ x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3½ x 70 sq.mm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 70 sq mm PVC LTUG Aluminium armoured cable With necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and run of 4 of 25 sq.mm (168/0.45) PVC copper wire of 1100V on 7/20 GI bearer wire for service connection mains.

Supply and run of 4 of 25 sq.mm (168/0.45)PVC copper wire of 1100V grade in 50mm (2”) dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.

Supply and fixing of 32A DP MCB in Metal box DP enclosure in flush with wall and making good of the concealed portion with earth connection.

Supply and fixing of 32A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection.

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2feet using angle iron of size1-1/2"x1-1/2"x1/4"rigidly fixed on wall covered with hylem sheet of size 2feet x1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.100A fuse units (500V),1No.neutral link,copperearth flat of size 1"x1/4"with interconnectionof EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and fixing of 100A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 3 Phase 100A aerial fuse unit for 3Nos. 100A fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps.

24 Indication : UP/ DOWN Digital direction & position indicator for all Landings, inside car 25 Emergency provisions : Battery operated Alarm bell & Light to be Provided with Automatic charging device. 26 Fire Man’s switch : In the Ground Floor 27 Minor Builder works : included 28 Scaffoldings : included 29 Sill angles and Facio Plates : included 30 Steel for Lift Machinery : included 31 Servicing and maintenance : Free Comprehensive Maintenance for one Year Guarantee period. Comprehensive servicing and maintrnance of the lift for further period of 2 years beyond free warranty period of 1 year from the date of commisioning lift should be done by the lift contractor. 32 Automatic Rescue Device : Provision to facilitate the landing to the nearest floor at the time of power failure. The ARD consists of suitable Battery system with charger, Inverter, under voltage protection system etc. complete with all accessories. 33 Provision for Intercom : To be provided in the Ground Floor & Machine Room with Phone (Press & Speak). 34 Lift License : Preparation of Drawings, payment of inspection charges to CEIG and insurance policy and Obtaining CEIG approval for the Lift as per Lift act should be done by the Lift contractor. 35 Floor Position : Included with LED display and floor annunciator. 36 Special Features: a. Infra red door sensor - full height screen b. Full width half height rear panel mirror c. S.S. hair finish hand rail in car d. Stainless steel signal features e. Vandal proof SS button with SS cover f. S.S. hairline finish door frames for landing doors g. V3F door operator h. Call register signal i. Stainless steel facio plates for car operating panel and landing fixtures j. Steel ladder for Lift machine room in lift pit. k. On / Off switch for fan and light l. Over-load warning indicator with audio Announcer m. Voltage stabilizer for control circuit.

37 Over Speed Governor, Phase failure and Phase reversal Relay, alarm bell, T guide brackets for car and counterweight, Rubber padding under the winding unit, Motor of adequate capacity, Electromagnetic brake with compression springs, Car safety gears, Buffers, Electro mechanical locks, Emergency key, side supporting angles, Motor over - load protection devices, Final limit switch main, suspension ropes, Counter weights, Lifting joist for mounting the Machineries. 38. Guarantee : Guarantee at least for one year for the materials and workmanship of equipments should be offered by the Lift contractor. 39. Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the User department. 40. Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided. (Johnson/ Kone/ OTIS)

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supply and run of 3 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed FRLS Copper .Conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14SWG TC wire with painting of suitable colour. (For Lift Well Light Control)

Supply and fixing of 16A Two-way switch in suitable Modular type GI box on wall with suitable front cover plate with connection (Higher End) (For Lift well lighting Control)

Supply and fixing of 63A FP MCB with 63A 30mA FP ELCB in 8 module weather proof enclosure in flush with wall and making good of the concealed portion with earth connection (Higher end). (In Lift Machine Room)

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (In Lift Machine Room)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (For 1No Lift Room Lighting Control)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 100W LED Flood light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (For Arch Name Letter Focus)

Supply and fixing of 7W LED LB 12-880-XXX-65-08 Path way directional reflector with PC diffuser and extruded aluminium power coated bollard provides uniform illumination for pathways on wall with PVC unsheathed copper leads with MS clamps and with painting. (For Pathway)

Supply and fixing of 15W LED Spike Light LYCUSSPS15W LED 730PSYMBOTG Environmental friendly new generation energy saving decorative IP 66 LED Spike light using COB LED as light source with PVC unsheathed copper leads with MS clamps and with painting. (For Statue Focus)

Supply and fixing of 8W LED Sport Light UNECOADJDLR8WLED 830S24 new generation energy saving aesthetically designed recessed mounted down light pressure die-cast aluminum heat sink high efficiency lohg life COB LED with PVC unsheathed copper leads with MS clamps and with painting. (For Arch)

Supply and fixing of 20W LED Post Top LP07-251-XXX-57-CL Pure polyester UV Resistant powder coated die cast aluminium housing with polycarbonate clear diffuser for uniform illumination with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 80W LED high Bay SAUCERGENXHBP 80W LED 75P 60DB OLTG Next generation engrgy saving environment friendly & robust highbay LED with PDC housing suitable for ceiling( Surface /Suspended ) mounting with PVC unsheathed copper leads with MS clamps and with painting. (In Portico)

Supply and laying of 4 x 10 sq. mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. [For sump Motor )

Supply and clamping of 4 x 10 sq. mm PVC LTUG armoured LTUG cable on post or on wall with MS (Clamps.

Supply and fixing of brass cable gland for 4 x 25 sq mm PVC armoured LTUG cable, with earth connection.

Supply erection testing commissioning of 1.50TR (4500 KCal/Hr) ABS Plastic split type Air Conditioner conforming to IS1391[Part 2] 1992 with Rotary compressor operating on refrigerant Non CFL suitable for wall mounting for operating on 230V 50HZ single phase AC supply with Three star rating Model as per BEE Specification and capable of performing the following functions. A) Cooling, B) dehumidifying C) Air circulating D) Filtering the installation work for the above split type AC units includes the following. 1. Mounting /fitting indoor and outdoor units at their respective locations. 2. Laying refrigerant pipe line of 6mtrs distance and connecting both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm 3. Insulating the suction pipe with expanded polythene foam 5mm thick tubing. 4. Laying 15mm dia flexible PVC drain pipe of 6mtrs length to throw out the condensate water being formed in the indoor unit. 5. Leak testing the entire gas unit. 6. Charging refrigerant gas in the unit. 7. suitable electric wiring to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit.(Make -Carrier/voltas /Blue star make only)

Supply and fixing of 4KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply.

Supply and laying of 5/8'' and 3/8'' copper pipe (Extra beyond 3Mtrs supplied with AC Unit)

Supply and fixing of MS Stand for fixing outdoor unit.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

SAKTHI ELECTRICALS (BID ID -1391202)

JAIBHARATHI AND CO (BID ID -1398834)