Providing Paver block road at Ponni Nagar Cross Street in Ward 62

Amount

Earth work excavation for foundationin Hard stiff clay ,stiff black cotton ,hard red earth,shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water ,light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site clearing awey from the site etc.,complete 10cum

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Supplying and laying Rubberised interlocling Paver Block M40 grade providing and laying of 80mm thick high strenght type conforming IS 15658 - 2007 of rubberized interlocking paver block in size of minimum compressive strenght of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quary rubbish cushion below the uniform shape of approved non skitting surface in the top and the rate including leveling the base preparation of pavers as sub base , quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting, loading. unloading of laying paver blocks as per standard specificationss.

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jelly for raising the existing the manhole wall and using CC 1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete.

Manufacturing , supply and fixing of Retro-reflecries road name sign board single arow of size made out of wide angle cub corner micro prismatick grade sheeting conforming to IRC 67- 2010 and type XI of standards of ASTM 4956- 09 specification and fixed over 2mm tk aluminium sheet and back support frame by 32Np stainless steel pipe alround and 65Np pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 Grade cement concrete 30cm x 30cm x 45cm etc., complete. the information message shall be made out of cutout letter in blue colour transparent overlay film as per IRC 67:201 guideluines 7 years pre qualification warranty for Retro-reflective sheeting from the original sheeting manufacture and a certified copy of three years out door exposure report from and independent test lab for the product offered shall be submitted by the contractor. The sign board shall be retro reflective type XI, the retro reflective sheeting should have manufacture ward mark on the sheeting surface for identification and the reflective sheeting should be orientation free.etc, complete. 36'' x 18'' size board

Add GST 18%

R UDHAYA KUMAR