Construction of hydt with installation of deep im ii hand pump one hp solar motor pump steel structure frame for installation of two thousand ltr pvc water storage tank and five nos tap with platform recharge pit etc (Group-04)

A. DRILLING PORTION

HYDT of drilling 200mm x 165mm x 120 meter deep bore well in all kinds of soil and rock in rural or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete.(M1036)

0 - 50 meter

60 meter onwards

Supplying all materials, labour,tools, tackles & lowering of 200mm dia UPVC Casing pipe confirmingto IS 12818:2016 (CML NO 5543459) latest revision including carriage all complete job.

Supplying all materials, labours, tools & equipments for fitting & fixing 200mm dia MS Cap over Casing pipe complete job.

B. CIVIL PORTION

Supplying all tools, equipment and labours and lowering 32 mm dia G.I. suspension pipe in 3 mtr. Length in the drilling bore of tube well etc. all complete job as per direction of E/I. (M1051)

Providing labour for fitting and fixing deep well cylinder jointing materials, chrome leather bucket all tools and plan etc. required for the job for low water level all complete job as per specification and direction of E/I. (M1052)

Providing all labours for fitting and fixing of India Mark II Hand Pump including supplying all tools and plants required for the all job complete as per direction of E/I. (M1053)

Supplying all materials, labours and equipment for constructing PCC (1:2:4) circular platform around each drilled tube well including 12mm thich cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc. all complete (M1045)

Supplying all materials labour and equipment for constructing PCC (1:2:4) drain as per UNICEF Design etc. all complete . (M1046)

Supplying tools, labours and materials for painting numbering and year for construction of T/well and taking of colour Photograph with two or three nearest person including platform, drain, soak pit and also longitude & latitude, details of T/W such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/ formate all complete as per direction of E/I.

C. COST OF MATERIALS

(Basic rate of standard ISI Marked India Mark deep well hand pump for India Mark-2, ISI 15500 ( Part-2)/2004 with latest revision including 12 mmx3 metre long 8 nos connecting rods made of bright bar electro- galvanised fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well dia 100 to125 mm casing pipe. ( M1023)

Basic rate of 32 mm dia GI pipe 3 Mtrs long screwed atboth ends with seamless socket as perrelavent B.I.S specification IS1239( Part-I)/2004 ( JSR M-1025)

Solar submersible motor pump (SPV DC Type)

i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE)

Provision of solar night lamp.

Construction of galvanised tubular steel structure staging for (4.5 m)HDPE water storage solar panel

Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.

Information board for IEC

Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP DSR-2018-2019)

Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate)

Construction RCC Foundation for steel structure staging and solar panel

Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I

Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I

Providing RCC M-200 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.(BCD-SOR) Part- A 7.2 C Case 1

Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I.

Carriage of material

Cement lead 10km(avg)

Sand lead 36 km (avg)

Stone chips lead 12 km (avg)

Bricks lead 8 km (avg)

Steel reinforcement lead 10 km(avg)

Installation of 2000 ltr capacity water storage tank

Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank(DWSD. Item No-01 M)

Transportation Charge

Lifting of 2000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour

Making hole in Tank

Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.

Plateform & stand post

Earth work in excavation in foundation trenches in hard soil vide classification item-B and disposal of excavated earth as obtained to a distance up to 50 m including all lifts,levelling,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specifications and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labours , royalty and taxes all complete as per building specification and direction of E/I.(mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing P C C M-150 in nominal mix of (1:2:4)in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M2.5 to 3 including screening shuttering , mixing cement concrete in mixer and placing in position ,vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 with 1.5 mm thick cement punning over it including screening, curing, with all leads and lifts of water, taxes and royalty all complete as per building specification an direction of E/I.

Carriage of material

Cement lead 10km(avg)

Sand lead 36 km (avg)

Stone chips lead 12 km (avg)

Bricks lead 8 km (avg)

Tap connection

Supplying all materials ,labours and laying U.P.V.C. ( Schedule-80 ) Pipes of approved make ( Paras, Prince, finolex,supreme, Kishan or equivalent ) in trenches including jointing with with G.I. socke with red lead and yarn and screw joints and cutting pipes to sizes and threading ends wherever necessary etc. all complete as per specification and direction of Engineer-in-Charge. (excluding cost of GI Sockets)

40 mm dia Rising

32 mm dia Delivery

Providing and fixing ISI marked G.I. Fittings (such as elbow, reducer, reducing elbow,tee,nipple, socket, union socket,etc) of approved make all complete as per specification and direction of Engineer-in-Charge(

GI Nipple

15 mm dia

Reducing Tee(Plain) Taking larger Dia

32mm dia

GI Union Socket

32 mm dia

GI Socket

32 mm dia

15 mm dia

GI Plugs

15 mm dia

Providing and fixing ISI marked Gun Metal Full way wheel Valves of approved make all complete as per specification and direction of Engineer-in-Charge

32 mm dia weight not less than 700gm

Providing and fixing 15 mm size C.P. brass pillar cock( Weight not less than 350 gm) C.I. body brass spindal of approved quality as per specification and direction of Engineer-in-Charge

Soak pit cum recharge pit

Eartwork in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance upto 50 meter including all lifts, levelling, ramming the foundation trenches removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing, coarse clean sand in filling in foundation trenches or in plinth including ramming & watering in layers not exceeding 15 mm thick with all leads, including cost of materials, labour, royalty & taxes all complete as per building specification & direction of E/I.

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I.

Providing P.C.C. M-200 in nominal mix of (1:1.5:3) in foundation with approved quality of stone chips 50 mm to 25 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification & direction of E/I

Providing 250 mm thick brick jali work in CM (1:8) in foundation with designation 75 A bricks and approved quality of clean coarse sand finished with deep ruled ponting in C.M (1:3) all complete job

Providing designation 75 A brick work in cement mortar (1.6) in foundation and plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening matrials raking out jont to 15 mm depth, curing, taxes royalty all complete as per building specification & direction of E/I.

Providing Precast R.C.C. M-200 in nominal mix of (1:1.5:3) in different places with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification & direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rodsin positon all complete as per building specification & direction of E/I. ( 0.18 Cum @ 80 Kg/Cum)

Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I.

Providing fitting and fixing suitable MS grating at inlet of soak pit and cleaning of site for executionof as per direction of E/I.

Supplying all materials labour and equipment for constructing PCC (1:2:4) drain as per UNICEF Design etc. all complete .

Carriage of material

Cement lead 10km(avg)

Sand lead 36 km (avg)

Stone chips lead 12 km (avg)

Bricks lead 8 km (avg)

Hence O & M Cost for 1st year (Excluding Repair Charges)

O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges

O & M cost for 3rd Year =1.06 x 2st year

O & M cost for 4th Year =1.06 x 3rd year

O & M cost for 5th Year =1.06 x 4th year

Provision of one no SIM card & its recharging cost for RMC

GST @ 18% (Add SGST 9%+CGST 9%)

Labour Cess 1%