Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58.8 LAccepted-AOC 15A2 1 INTUC 5 SANKARANKOVIL ROAD RAJAPALAYAM TALUK VIRUDHUNAGAR DISTRICT 626 117 | VIRUDHUNAGAR | TAMIL NADU | 626117 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹60.5 L+₹1.7 L (2.83%)Rejected-Finance 281 BLOCK 21 M G R STREET NEYVELI CUDDALORE TAMIL NADU 607807 UDYAM TN 04 0047548 | CUDDALORE | TAMIL NADU | 607807 | L2 | Rejected-Finance Rejected |
Tender Value
₹59.8 L
EMD Value
₹59,750
Closing Date
12 Jul 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
the Project Director, DRDA, Virudhunagar District.
the Project Director, DRDA, Virudhunagar District.
Upgradation of the roads - 01 nos. in Package no. MGSMT-21/2024-25 at Rajapalayam Block of Virudhunagar District under MGSMT(2024-25)
2024_RDTN_459998_1
c6/2824/2024date24.06.2024
Open Tender
Civil Works
Item Rate
120 days
the Project Director, DRDA, Virudhunagar District.
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹59,750
the Project Director, DRDA, Virudhunagar District.
24 Oct 2024
4 Jul 2024
12 Jul 2024
4 Jul 2024
12 Jul 2024
4 Jul 2024
5 Jul 2024
Amount
Part:1.SH 41 to Thulakudi kanmoi mathagu road in Cholapuram Panchayat. Km (0/0-0/690) R-175.
Part:A.Upgradation
Clearing Scrub Jungle without alignment for the widening of the formation of the road cutting of trace up to 30mm girth products the cleaning are to be stocked in such a place as ordered by the departmental officer and the ground shall be left in a perfectly clean condition. All holes of hollows whether original, existing (or) produced by digging of roots shall than be carefully filled up the earth well rammed and leveled of and the entire work completed in all respect as per SI 17 (2).
Labour Charges for Picking 5cm to 10cm old metalled Surface and Sectioning etc,… comlete
Earth work excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS .20.A
Providing and laying including cost and conveyance of gravel fromapproved sources to work site including labour for spreading,watering and compacting by power roller to achieve the requiredProctor density at 100% compaction at Optimum moisture contentand hire fuel charges for powerroller, watersprinkler and all otherincidental charges such as traffic barricading and providingdangerlights etc. comp
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .
Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.
Providing and laying of Prime coat using 7 Kg of BituminousEmulsion-SS-1 for 10 sqm over the WMM surface preparatory toanother bituminous construction over it including, including cost ofmaterial, labour charges, rentals for machinery, fuel and all otheri
Providing and laying Tack coat over WMM surface(treated withprimer) using 2.5Kg of bitumen emulsion RS-1 for 10 sqm forpreparatory to another bituminous construction over it, includingcost of material, labour charges, rentals for machinery, fuel and all others etc.,
Providing and laying Bituminous concrete using 0.13cum of19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 46.28 kgs ofVG30 bitumen and 4.02 kgs of plastic wastes for 10 sq.m. andheating the aggregates to required temperature and mixing them inrequired temperature in central hot mix plant 20-30 ton capacity,carrying the mix by tipper trucks to paver site, spreading the mix touniform thickness with mechanical paver to the specified gradesand cross sections and consolidated by 8-10 tonnesvibratory/phenumatic roller to the required density etc., includinglabour for attending to paver to site etc.including hire charges andfuel charges foe 20-30t CMP with bitumen boiler, tippertrucks,paver finisher/9m paver finisher,vibratory/phenumatic rollerand all other tools and plants required, including fuel and all otherincidental charges etc., complete as per specification using CMPas per clauses 507 of MORTH Part-5.
Road Marking-Providing and laying of hot applied Thermoplasticcompound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5 mm is exclusive of surfaceapplied glass beads as per IRC:35. The finished surface to belevel, uniform and free from streaks and holes etc complete as perMORT&H specification No.803
Providing and fixing reflective road studs of ‘category A’ Raised pavement markers madeout of poly carbonate / methyl methercrylate /ABS moulded body confirming to ASTM D 788and reflective panels with micro prismatic lens capable of providing total internal reflection ofthe light entering the lens face with retro reflectance and chromaticity values conformingto ASTM D4280. The reflective raised pavement markers shall also confirm to theMORTH circular No RW / NH. 33023/ 10/ 97-DO.III dt 11.06.97. The height, width andlength shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflectivearea of 13 Sq.cm on each side and the slope to the base shall be 35 +/ - 5 degree.Each reflector shall have a CIL not less than values specified in Table 2 of said MORTHcircular. The strength of detachment of the integrated cylindrical shanks, (of diameter notless than 19 +/ - 2mm arid height not less than 30+/ - 2 mm) from the body is to be aminimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to goinside, without nails and using epoxy resin based adhesive as per manufacturer’srecommendation and complete as directed by the engineer. The marker shall support aload of 13635 Kg tested in accordance with ASTM D428O and confirming to IRC 35 -2015 guidelines and MORT&H specification 804 etc., complete
Providing HM Stone- Reinforced cement concrete M15 gradekilometer stone of standard design as per IRC 8 fixing in positionincluding painting and printing etc., as per technical specification clause 1703
Providing and erecting of Retro - Reflectorised Cautionary , Mandatory and Information signs(with Definition Board ) made out of High intensity Prismatic grade SheetingConfirming toType-IV Standard of IRC-67 : 2012 and ASTM D 4956-09 , Specification and fixed over 2 mmthick Aluminium sheet fixed over a back Supporting frame of 25 mm X 25mm X 3mm Mildsteel angel angle and supported on a mild steel angle post 75 mm X 75 mm X 6 mm with aclear height of not less than 2.10 m from the ground level to the bottom of the sign boardand 0.60 m below ground level . The sign post should be painted asper IRC 67 -2012 andfirmly fixed to the ground by means of roperly designed foundation with M15 grade cementconcrete 45 cm X 45 cm X 60 cm size including cot and conveyance of all materials ,Equipment , machinery and labour with all leads and lifts , Loading charges necessary forsatifactory completion of the works as directed by the engineer in Charge . High intensityRetro - Reflectro sheet shall consist of minimum coefficient of Retro - Reflection as per Table6.6 of IRC 67 - 2012 . The retro - Reflective sheeting shall be covered under 7 year warrentyissued for field performance and certified copy of theree years outdoor exposure report shallbe obtained as per IRC 67 - 2012 (As per MORT & H Specification no .801) - 60 cmEquilaterial Triangle
Providing Name board as directed by the Engineer-in-charge - The name board consist oftwo Part (i) Work details & (ii) Citizen Information.(1)The composite unit of two MS plate of 1.626 mm(16SWG).(2) The top plate900mmx800mm and bottom plate willbe900mmx750mm size welded over frame of 25x5mmflat iron which will be againwelded over two verticalandfourhorizontal MS flat iron frame of25mmx5mm size on back and allunitconnected to Circular steel section of75mmdia with2.642 mm (12 SWG) Thickpost as per drawing and technical specification.(3)The boardshould be firmly fixed to the ground by means of properly designed foundations with M-15grade cement concrete of 600x600x750mm,750 mm below GL.The gap between bottom oftop plate and top of bottom plate will be 50mm. (4)The board should be printed over the 5mmthick Foam Board with UV lamination with mat finish. This printed board shobe pastedover the MS sheet of the name board using Synthetic Rubber adhesive.
Construction of Toe wall
Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B etc,, complete
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.
Supply and Centering shuttering the concrete surface with necessary supports including all cost and conveyance etc,.. Complete
Supply and Centering shuttering the concrete surface with necessary supports including all cost and conveyance etc,.. Complete
Provision for Weep Holes
Cement concrete 1:3:6 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.
GST Amount for providing Service to the above Government Contract Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
RAM CONSTRUCTIONS (BID ID -1080158)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .