Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.2 L+₹1.6 L (3.94%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹42.4 L+₹2.7 L (6.74%)Rejected-Finance N S T COLONY CIRCULAR ROAD HOUSE NO 04 DMC DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹43.2 L+₹3.5 L (8.78%)Rejected-Finance RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-Finance Higher bid value | |
| 5 | Rejected-Technical | - | Rejected-Technical appropiate category not found |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
28 May 2022, 6:00 pmClosed
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
Repair/painting of Steel Almirah, Locker, Book Case, Book Shelf, Rack, Chair, Table and Bed etc at RMS and Dimapur.
2022_MES_517854_1
8453/C/E8
Open Tender
Civil Works
Item Rate
334 days
RANGAPHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹77,000
Yes
25 Jul 2022
12 Apr 2022
30 May 2022
12 Apr 2022
28 May 2022
14 May 2022
Amount
Drg No: FD-1031 Almirah large steel with shelves (Qty 110 Nos) Taking out old unsv components of Almirah large steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge.
New GI locks 6 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel handle chromium plated
New steel legs made out of 1mm thick MS Sheet
New shelves made out of 1mm thick MS Sheet..
Fixing of shelves in existing position with appropriate size MS rivet as directed.
Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, steel screw/revits) and adjustment for smooth functioning as specified.
M&L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified.
Drg No: FD-1032 Almirah Medium Steel with Shelves (Qty 240 Nos) Taking out old unsv components of Almirah medium steel and S & F new components in replacement as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge.
New GI locks 6 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel handle chromium plated
New steel legs made out of 1 mm thick MS Sheet
New shelves made out of 1 mm thick MS Sheet.
Fixing of shelves in existing position with appropriate size MS rivet as directed.
Repair of loose doors by replacing unsv existing hinges, fittings (Nut & Bolts, steel screw/revits) and adjustment for smooth functioning as specified.
M&L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified.
Drg No: FD-1033 Almirah large steel 1/2 hanging x 1/2 shelves (Qty 30 Nos) Taking out old unsv components of Almirah steel 1/2 hanging x 1/2 shelves and S& F New components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New GI locks 6 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel handle chromium plated
New steel hanging rod 20mm dia CP conduit pipe of wall thickness 1.25 mm
New steel sockets 25mm dia chromium plated with fixing steel screw.
M&L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified.
Drg No: FD-1029 Locker steel (Qty 1080 Nos) Taking out old unsv components of Locker steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New steel bow handle chromium plated heavy duty.
New steel hanging rod 20mm dia CP conduit pipe of wall thickness 1.25 mm
New steel sockets 25mm dia chromium plated with fixing steel screw.
Repair of loose doors by replacing unsv existing hinges, fittings and adjustment for smooth functioning as specified.
New steel hasp and staple 75mm CP fixed with revits to the shutters as specified.
New steel tower bolt 75mm welded to the shutter as specified.
New steel legs made out of 1mm thick MS sheet.
M&L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified.
Drg No: FD-1028 Book Case Steel (Qty 25 Nos) Taking out old unsv components of Book case steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New GI locks 4 levers with duplicate keys. Make:Godrej/Novex/Link/Priya.
New steel bow handle chromium plated
New glass pane 3mm thick. Make-Modigurd/Saint Gobin
Fixing of loose shutters in existing position with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving.
M&L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified.
Drg No: FD-69(M) Book shelf open small steel (Qty 40 Nos) Taking out old unsv components of Book shelf small steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
Removing old unsv legs from Book shelf and S & F new pieces of angle iron 40x40x3mm thick of 100 mm long and welded to the worn out piece of legs the Book shelf and also spot welding of cracks and joints as specified and as directed,
New shelves, bottom & top made out of 1 mm thick MS Sheet.
M&L for de-rusting, denting scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified.
Drg No: FD-1038U Rack adjt six tiers steel (Qty 40 Nos) M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified.
Drg No: FD-1023 Rack side with tray steel (Qty 45 Nos) M&L for de-rusting, denting,scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified.
Drg No: FD-255 Teapoy Varandah (Qty 15 Nos) Taking out old unsv components of Teapoy varandah and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/Novapan/Archid duly provided 4 mm thick teak wood beading alround the top duly polished with two coats of french polish.
New leg made out of 20mm thick steel condute pipe of wall thickness 1.6 mm.
New hard rubber shoes with inside steel washers for legs.
M&L for welding and adjustment of legs to the Flat iron and painting of frame with one coat of synthetic enamel paint white after preparation of steel surface.
Drg No: FD-165 Table dining ORs (Qty 35 Nos) Taking out old unsv components of Table dining ORs and S & F new components in replacement as per shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :-
New legs made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New long bottom stiffener made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New short stiffener made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New hard rubber shoes with inside steel washers for legs.
New top made out of 18mm thick particle board covered on top with 22 guage aluminium sheet, and fixed to frame with 40 mm steel screw.
M&L for welding to the entire frame and painting to the frame with one coat of synthetic enamel black paint after preparation of steel surface.
Drg No: FD-1004 Table office clerk steel (Qty 120 Nos) Taking out old unsv components of Table office clerk steel and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick teak wood beading alround the top duly polished with two coats of french polish.
New GI lock 4 levers with 2 keys Make:Godrej/Novex/Link/Priya.
New legs made out of 25mm square tube 1.6 mm wall thickness.
M&L for repairing of drawer by replacement of MS channel providing welding & denting.
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified.
Drg No: FD-1003 Table office officer steel (Qty 45 Nos) Taking out old unsv components of Table office officer steel and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick teak wood beading alround the top duly polished with two coats of french polish.
New GI lock 4 levers with 2 keys Make:Godrej/Novex/Link/Priya.
New legs made out of 25mm square tube 1.6 mm wall thickness.
M&L for repairing of drawer by replacement of MS channel providing welding & denting.
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified.
Drg No: FD-1008 Table Steel 900 x 600 x 760mm with drawer (Qty 28 Nos) Taking out old unsv components of Table Steel 900 x 600 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick teak wood beading all round the top duly polished with two coats of french polish.
New GI lock 4 lever with 2 keys Make:Godrej/Novex / Link / Priya.
New legs made out of 25 mm square tube 1.6 mm wall thickness.
M&L for repairing of drawer by replacement of MS channel providing welding & denting.
New long bottom stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New short stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified.
Drg No: FD-1007 Table Steel 900 x 600 x 760mm without drawer (Qty 25 Nos) Taking out old unsv components of Table Steel 900 x 600 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick teak wood beading all round the top duly polished with two coats of french polish.
New legs made out of 25 mm square tube 1.6 mm wall thickness.
New long bottom stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New short stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame.
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified.
Drg No: FD-1009 Table Steel 900 x 900 x 760mm (Qty 40 Nos) Taking out old unsv components of Table Steel 900 x 900 x 760mm and S&F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New top made of 18 mm thick pre-laminated particle board teak face make-Bhutan board/ Novapan/Archid duly provided 4 mm thick teak wood beading all round the top duly polished with two coats of french polish.
New legs made out of 25 mm square tube 1.6 mm wall thickness.
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified.
Drg No: FD/E6/MAP/15® Table bed side (Qty 140 Nos) Taking out old unsv components of Table bed side and S & F new components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New front leg made out of 20mm dia steel square tube of wall thickness 1.6 mm.
New rear leg & top rail made out of 20mm dia steel square tube of wall thickness 1.6 mm.
New hard rubber shoes with inside steel washers for legs.
New drawers made out of 18mm thick pre-laminated particle board on fron side and plywood sides and bottom including telescopic channels all as specified and as directed.
M&L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint black, complete all as specified.
Drg No: FD/E6/MAP/08(R) Bed hard (Qty 125 Nos) Taking out old unsv components of Bed hard and S& F new componentsin replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New Top of 12 mm thick ply wood commercial BWR grade Make-Globe/Green/Archid
New pre-laminated particle board 18mm thick teak face with PVC edging to head board.
New pre-laminated particle board 18mm thick teak face with PVC edging to foot board.
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including welding of joints and cracks to frame and preparation of old steel surfaces and applying one coat of synthetic enamel paint black, complete all as specified.
Drg No: FD/MAP-II/01 Charpoy IP with hard top (Qty 175 Nos) Taking out old unsv components of Charpoy IP with hard top and S& F new Componentsin replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :-
New Top of 12 mm thick ply wood commercial BWR grade Make-Globe/Green/Archid
New hard rubber shoes with inside steel washers for legs.
M&L for de-rusting, denting, scrapping, filling with putty including welding of joints and cracks to frame and preparation of old steel surfaces and applying one coat of synthetic enamel paint black, complete all as specified.
M/S BIJOYA LAXMI ENTERPRISE
SHRI VIKASHE ZHIMOMI
SHRI MADAN SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .