Loading
Loading…
Loading…
Tender Value
₹21.5 L
EMD Value
₹43,079
Closing Date
14 Jul 2026, 3:00 pm6d left
Executive Engineer (Civil), RIMS.
Regional Institutes of Medical Sciences, Imphal.
Construction of CC pavements in and around the PG Gents Hostel Campus, Marble stone flooring of stair case, CGI sheet roofing for the PG Gents Hostel No 1(Kheba), RIMS, Imphal.
2026_RIMS_915737_1
17/2026-27/RIMS/Imphal
Open Tender
Civil Works
180 days
As Per Tender Document
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Director RIMS.
₹43,079
3 Jul 2026
3 Jul 2026
15 Jul 2026
3 Jul 2026
14 Jul 2026
3 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level: | |||||
| 1.2 | c). 1: 4: 8 ( 1cem: 4 c/sand : 8 graded stone aggrt. 20 mm nominal size ) | 89.56 | cum | 1 | ₹89.56 |
| 1.3 | c). 1: 3: 6 ( 1cem: 3 c/sand : 6 graded stone aggrt. 20 mm nominal size ) | 44.78 | cum | 1 | ₹44.78 |
| 2Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with | |||||
| 2.1 | Agaria White | 66.89 | sqm | 1 | ₹66.89 |
| 3 | Extra for prefinished nosing to tread of steps of marble stones. | 51.63 | sqm | 1 | ₹51.63 |
| 4Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats synthetic enamel paint including welding and bolted with special shaped washers etc. complete. | |||||
| 4.1 | Electric Resistant Welded tube (Conforming to IS:1611-1979) | 1,131.08 | kg | 1 | ₹1,131.08 |
| 5Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy rimer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with | |||||
| 5.1 | Precoated galvanised iron profile sheets 0.40 mm thick | 154 | sqm | 1 | ₹154 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.50 MB
BOQ_962360.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid