REPAIR/MAINT TO LEAKAGE, SEEPAGE, ROOF TREATMENT, PLUMBING WORKS, JOINERY, ALUMINIUM AND MISC BLDG WORKS AT UROLOGY TOILET, MEDICAL II TOILET, BURN CENTRE, OR FAMILY WARD, PADETRIC WARD, PERSONAL LINE, COMT HOUSE, QM COMPLEX, VARIOUS WARDS AT CH(CC)

Amount

Brickwork with Brickwork with Fly ash bricks (bricks shall be burnt clay flyash building bricks as per IS- 13757), straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 including demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed by Engineer -in-Charge.

Brickwork with Fly ash bricks (bricks shall be burnt clay flyash building bricks as per IS- 13757) straight or curved to any radius in half brick thick wall built in cement mortar 1:4, including demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed by Engineer -in-Charge

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.

Plain, solid, straight chowkhats & frames of 2nd class HW wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkhat & treated with coal tar ,complete all as specified and directed by Engineer-in- Charge.

Hold fast, band straps, supports ,Wind ties for stay securing bolts, posts & struts in fencing including cutting cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to Fe-290 Gde E-165 , complete all as specified and directed by Engineer-in-Charge.

Dismantling structural steel work including doors, windows and gates but excluding framed trusses etc complete all as specified and directed by Engineer-in-Charge.

Steel work in tubular trusses including special shape washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.240 ,with one shop coat of zink chromate primer paint, complete all as specified and directed by Engineer-in-Charge.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to GDE-Fe-410-W with one shop coat of zinc chromate primer paint complete all as specified and directed.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 160 of SSR Part-II ,complete all as specified and directed by the Engineer in Charge.

Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with out mitred beads for securing glass etc size of members of window shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats , complete all as specified and directed by Engineer-in-Charge.

30 mm thick Second class hard wood Glazed and skeleton shutters for window/ ventilators, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with out mitred beads for securing glass etc size of members of window / ventilator as specified in SSR Part I, Section 8, clause 8.24 (b) fitted to chowkhats , complete all as specified and directed by Engineer-in-Charge.

30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails , complete all as specified and directed by Engineer-in-Charge.

Taking down hinges, all types of door fittings ie handle, tower bolt, sliding bolt etc of any type and size complete all as specified and directed by Engineer-in-Charge

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ,complete all as specified and directed by the Engineer in Charge.

Butt hinges medium weight (ISI Marked) cold rolled mild steel and fixed of size of hinges 75 mm ,complete all as specified and directed by the Engineer in Charge.

Aluminium alloy handles of size 125 mm, cast type anodized ,complete all as specified and directed by Engineer-in- Charge.

Extruded aluminium alloy handles of size 125 mm, fabricated type anodized ,complete all as specified and directed by Engineer-in- Charge.

Aluminum anodizes barrel tower bolts of extruded section and fixed of 200 mm long size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Aluminum anodizes barrel tower bolts of extruded section and fixed of 100 mm long size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery ,complete all as specified and directed by Engineer-in- Charge.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Floor door stopper 150 mm of aluminium alloy body and tonge,anodised with hard drawn steel spring fixed as in repair , complete all as specified and directed by Engineer -in-charge.

Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by Engineer-in- Charge.

Figured glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by Engineer-in- Charge.

Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, including Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge.

Figured glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, including Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge.

Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge.

Aluminium Anodised window, ventilator fixed type shutter, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw as in repair,complete all as specified and directed by Engineer -in-charge.

Aluminium Anodised door shutter, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw as in repair , complete all as specified and directed by Engineer -in-charge.

Aluminium Anodised aluminium partition with 12mm thick prelaminated particle board at bottom panel and 5.5.mm thick glass on top panel including glazing clip and neosprene rubber beading as in repair , complete all as specified and directed by Engineer -in-charge. Note: Rate of Glass and 12 mm thick prelaminated particle board shall be included in the rate quoted by the contractor against above item.

Neosprene rubber beading including taking down old rubber beading as in aluminium window and door shutter , complete all as specified and directed by Engineer-in-Charge.

Door seal with aluminium 20 x 1.5 mm strips with wool, complete all as specified and directed by Engineer-in-Charge.

Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick aluminium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed as in repair , complete all as specified and directed by Engineer -in-charge.

Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed as in repair , complete all as specified and directed by Engineer -in-charge.

Mortice lock, 100 mm mild steel verticle type brass 4 Levers and fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable , complete all as specified and directed by Engineer -in-charge. Note :Floor door springs where renewed shall be measured and paid separately under appropriate item.

Repairing of existing toughend glass door single leaf including oiling and greasing of floor springs,replacement of hinges,handle,lock of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 12 mm glass and making the door and shutter serviceable complete all as specified. (Floor door springs where renewed shall not be measured & paid seperately it includes the rate of floor spring also)

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable complete all as specified. (Floor door springs where renewed shall be measured and paid separately under appropriate

Preparation of new wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint (Ordinary tint) over a coat of pink primer , complete all as specified and directed by Engineer-in-Charge.

Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint (Ordinary tint) over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Preparing and treating treating ends of posts, backs of chowkats, etc., with coal tar black paint area tarred exc 0.1 Square Metre but n exc 0.5 Square Metre each , complete all as specified and directed by Engineer-in-Charge.

Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating small articles such as holdfasts, ends of posts, backs of chowkats etc., area not exceeding 0.1 Square Metre each , complete all as specified and directed by Engineer-in-Charge.

Rendering 10mm thick on fair faces of brick wall or concrete surface in cement mortar 1:6 finished even and fair without using extra cement, including taking down old cement plaster on brick wall, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair with and including WPC compound (2% of cement weight) as per manufacturer's instructions , including taking down old cement plaster on brick wall, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Rendering 5mm thick on concrete surfaces in ceiling in cement mortar 1:3 finished even and fair without using extra cement using including taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. ,complete all as specified and directed by Engineer-in- Charge.

Preparation of newly plastered or unplastered surfaces of ceiling by brooming down and priming plastered and other surfaces with and applying three coats of white wash,complete all as specified and directed by Engineer-in- Charge.

Preparing newly plastered wall surfaces and applying two coats of distemper oil emulsion over and including a coat of primer over and including a thin layer of wall care putty, complete all as specified and directed by Engineer-in-Charge.

Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of cement primer on surfaces of walls , complete all as specified and directed by Engineer-in-Charge.

Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including taking down old asbestos cement(corrugated, semi corrugated etc) sheet in roof covering etc complete all as specified and directed by Engineer-in-Charge.

Pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including taking down old asbestos cement(corrugated, semi corrugated etc) sheet in roof covering etc complete all as specified and directed by Engineer-in-Charge.

6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J or L hook including dismantling of existing roofing complete all as specified and directed.

6 mm thick Asbestos Cement two piece serrated ridge 6 mm thick for corrugated, or semi corrugated sheets and fixed with L or J hook or cranked jook bolts complete all as specified and directed by Engg-in-Charge..

M & L for water proofing treatment on roof surfaces in the following manner:- (a) Demolition of existing roof treatment of any type complete all as specified and directed by the Engineer in Charge. (b) 15mm thick screed plaster on RCC slab CM 1:4 with and including using water proofing compound @ 3% by weight of cement. (c) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (d) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg/sqm. ( e ) Providing 230X115X40 mm thick machine pressed brick tiles with minimum thickness of joint (n.exc.) & are throughly filled with water proof polymer based joint mortar complete all as specified and directed by the Engineer in Charge.

Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest, with front or back inlet with integral foot rests including connections to trap, and to flushing pipe, antisyphonage pipe, etc (excluding flushing cistern and flush pipe) including Cast Iron 'P' or 'S' trap of 100mm size fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish as in repair,complete all as specified and directed by the Engineer in Charge.

Vitreous China wash down water closet pan ( padestal pattern Water Closet Cat No.20012, white) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. , complete all as specified and directed by the Engineer in -Charge.

Wash basins , vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends in brackets or erecting stand ,32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia LDPE waste pipe of pressure rating 6 Kg/Cmsq and including new M S brackets including waste coupling of PTMT (half or full threaded) for 32/40mm dia fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum), with grating and union for discharge pipe ( excluding flushing cistern, flush pipe , and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement as in repair, complete all as specified and directed by Engineer-in-Charge.

PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level as in repair, complete all as specified and directed by the Engineer in -Charge

PVC connection of PTMT ,non corrosive with nuts and washers on both ends,450mm long suitable for 15 mm bore fixed as in repair, complete all as specified and directed by the Engineer in -Charge.

Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and directed.

Tubular towel rail 20mm dia D type,brass chromium plated 60 cm long between flanges fixed as in repair ,complete all as specified and as directed by Engineer-in- Charge.

Bib tape 15 mm bore, long body fancy type chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

Cast iron floor trap with chromium plated grating including jointing to waste pipe wih cement mortar (75 mm bore of pipe) fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Stop cock chromium plated concealed Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Angle stop cock chromium plated ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Bib taps PTMT( Polytetra Methyllene Terephthalate ) suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Angle stop cock( two way) chromium plated long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. andfixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Waste fittings 32 mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end , complete all as specified and directed by the Engineer in -Charge

Flexible pipe 32 mm bore of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling, complete all as specified and directed by the Engineer in -Charge

Flexible pipe 32 mm bore of PVC fixed to WHB/ urinals as waste pipe ( not less than 600mm) including PVC coupling fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Grating 75/100 mm dia in NT/FT of mild steel chromium plated fixed on trap loose or with CM 1:3 fixed as repair , complete all as specified and directed by Engineer-in-Charge.

Washer for flushing cistern including taking down old washer fixed as in repair , complete all as specified and directed by Engineer-in-Charge.

PVC Syphon to PVC flushing cistern including taking down old syphonfixed as in repair , complete all as specified and directed by Engineer-in-Charge.

Gun-metal, globe or gate valves 15mm dia , with iron wheel head, screwed both ends for iron pipe and fixed to 15mm dia GI tube fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Gun-metal, globe or gate valves 20mm dia , with iron wheel head, screwed both ends for iron pipe and fixed to 20mm dia GI tube fixed as in repair,complete all as specified and directed by Engineer-in- Charge.

Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) fixed as in repair, complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) pipes 110mm bore single socketed in any length with ruber rings joints laid in trenches or in floors in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 110mm bore single socketed in any length with ruber rings joints fixed to walls with necessary brackets in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 75mm bore single socketed in any length with ruber rings joints laid in trenches or in floors in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 75 mm bore single socketed in any length with ruber rings joints fixed to walls with necessary brackets in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 150mm bore single socketed in any length with ruber rings joints laid in trenches or in floors in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 110mm bore junction single, (single Tee) equal or unequal with access door fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 75mm bore junction single, (single Tee) equal or unequal with access door fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) Vent cowl 110mm bore fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) bends any radius 110mm bore fixed as in repair complete all as specified and directed by Engineer-in-Charge.

PVC (SWR) bends any radius 75mm bore fixed as in repair complete all as specified and directed by Engineer-in-Charge.

Steel water tubing, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, fixed in repairs complete all as specified and directed by Engineer-in- Charge.

Steel water tubing, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, fixed in repairs complete all as specified and directed by Engineer-in- Charge.

Refixing old Steel water tubing, 15 mm bore, with new galvanized fittings and fixed complete to walls, ceiling or laid in floors, including taking down old one complete all as specified and directed by Engineer-in- Charge.

Refixing old Steel water tubing, 20 mm bore, with new galvanized fittings and fixed complete to walls, ceiling or laid in floors, including taking down old one complete all as specified and directed by Engineer-in- Charge.

Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, including dismantling old tank complete all as specified and directed by Engineer-in- Charge.

Rotational moulded PVC, double layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, including dismantling old tank complete all as specified and directed by Engineer-in- Charge.

Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats in and including dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets , complete all as specified and directed by Engineer-in-Charge.

Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle section in and including of dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs false ceiling, with and including GI powder coated frame work and mineral fibre ceiling tiles , suspended with ceiling in and including of dismantlingof ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets , complete all as specified and directed by Engineer-in-Charge. Make : Dune Max RH 99 of Arm strong or Everest or any other make as specified in Annexure of Makes.

Divya Jyoti Constructions

Sanjay Traders

M/S AMARJIT SINGH

GANGA TRADERS