Construction of Dining and Kitchen at Mount Manipur

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing Stainless Steel (S.S.) sheet of approved grade and thickness over the existing steel framework, fixed with stainless steel self-drilling/self-tapping screws, fasteners, or other approved fixing arrangements, including cutting, drilling, bending, notching and fitting as required, making necessary holes, finishing exposed edges, aligning and securing the sheet in position, and including all labour, materials, tools, tackles, consumables and incidental works required for proper completion of the work, complete in all respects, as directed by the Engineer-in-Charge. 3 mm thick Stainless Steel (S.S.) sheet of grade SS 304 or SS 316 - (Floor)

Providing and fixing Aluminium Composite panel of size 8ft x 4ft , 4 mm thick of solid / plain color with a non-toxic polyethylene (PE) or fire-retardant core is sandwiched between two metal sheets.on both side (inner & outer) of timber frame work including cutting in required size and shape, placing in position, making correct the joints etc. and fixing fixed with steel screws / nails all complete. (Timber frame work shall be paid for separately)

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing 12 mm thick factory-made WPC (Wood Plastic Composite) board of approved make, fixed over existing framework with self-drilling/self-tapping screws, stainless steel fasteners, including cutting, edge finishing, drilling, all necessary fittings, hardware, labour, tools and tackles, complete in all respects as per the manufacturer's specifications and the direction of the Engineer-in-Charge. Eves board