Construction-Execution of Steel Super-Structure as per RDSO drawings with latest alteration including bearings for ROB LC No. 77(Four Lane) in between Khesraha - Bansi, LC No. 2 in between Khalilabad-Bhaghauli (Six Lane), LC No. 52 in between Mehdawal-Khesraha (Two Lane), LC No. 36 in between Bakhira-Mehdawal (Four Lane and LC No. 157-Special at GKC Yard of Lucknow division of N. E. Railway.

10.2. Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-2 of Chapter-3, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. 10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed in Annexure-3 of Chapter-3. The statement of existing commitments and balance amount of ongoing works should be submitted as per Annexure-E attached with tender document.

10.1Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Similar nature of work means: - Supplying, Fabrication, Erection & Launching of Open Web Girder/ Bow String Girder/N-Type Truss/Camel Back Truss (including Composite Open Web/Bow String Girder/N-Type/Camel Back) subject to the condition that those firms, who are on the RDSO's approved list of venders for fabrication of steel bridge girders, will be eligible. In case tenderer/firm is not on the list of RDSO approved firm for steel bridge girder, then tenderers/firms will have to get the steel girder manufactured through an RDSO firm in the RDSO approved premises only. (b) (i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1): Separate completed works of minimum required values shall also be considered for due fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract of or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Special conditions mentioned in Chapter -9 below the tender schedule will be applicable.