SPECIAL REPAIR TO QTR NO. 15 (09 TO 12) JS ARORA ENCLAVE UNDER GE (WEST) JALANDHAR CANTT

Amount

Taking down existing water proofing from roof slab and cleaning the roof slab incl roughening surfaces of old concrete by picking, sweeping clean and washing down with water to remove dust etc.

M&L for brushing with neat cement slurry with 3.0 Kg of cement per sqm meter complete all as spd and directed.

M&L 40mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg in padding Complete all as specified and directed.

M&L 12mm thick rendering on top of roof salb in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement.

Supply only integral water proofing compound.

Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats. The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats. The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application. Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system (Make - Asian Paints, BASF & SIKA) Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm.

Taking up or down existing steel 15 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed

Taking up or down existing steel 20 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed

Supplying, fixing, 15 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed .

Supplying, fixing, 20 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Material and labour for refixing of old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour for refixing of old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Dismantling of water tanks (PVC/RCC of any description) exc 250 ltr and n.exc 500ltr capacity and removing from site complete all as specified and as directed

Dismantling of water tanks (PVC/RCC of any description) exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed

S&F 500 ltr capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S&F 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed

S & F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified.

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:6all as specified.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:6 but except brick all as specified.

M&L for brick work in half brick thick walls built in cement mortar (1:4) using sub class ‘B’ old size bricks, straight or curved on plan to any radius complete all as specified.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified

M&L for preparing surfaces new plastered surfaces of walls by applying two coats of oil bound distemper with chalk whitening on plastered surface preparatory to distempering complete all as specified.

Complete removal of existing treatment of wall surfaces applying two coat of oil bond distempering over one coat chalk whitening on plastered surface all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified

M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatments on wall surfaces and applied two coat of cement base paint over one coat of primer all as specified and directed by Engr -in-charge.

M&L Plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash etc. complete all as sepcified and directed

M & L for preparation of old plastered surfaces of walls and applying two coats of white wash etc. complete all as sepcified and directed

M&L for repairing of R.C.C projections, chajjias, roofs, facia etc by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces with cement concreat (1:1.5:3) using 12.5mm graded crushed stone aggrigates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note : Welded mesh measured and paid seperately)

Demolition and breaking up drain pipes AC/PVC pipe in event n.exc 150 mm dia including all fittings.

S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed

S&F 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

S&F PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement incl taking down damaged floor trap in any position complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white including bolts, flushpipe of polyethylene of low or high density or PVC 32 mm dia anti syphonage pipe etc complete

Supply and fixing plastic water closet seat cover black closed patern with flat bottom and cover and mild steel chromium plated or aluminised hinging devices

S & F brass chromium plated jet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

S&F pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.

Supply and fixing in replacement chromium plated grating 125mm dia circular fixing with cement mortar 1:3 on nahani trap/floor trap complete all as specified and directed.

M&L PVC bath room cabinet of size 585mmx483mmx110mm with mirror all as specified.

S&F for sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm. Make Nirali

Material and labour in repair stainless steel plate rack of superior quality size 31" x 24" with not less than 8 kg complete all as specified and directed.

M&L for 25 mm thick granite machine cut as in window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over bedding layer or screed 15 mm thick in cement mortar 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge.

Material and labour for 25mm dia mild steel pipe curtain rod, powder coated fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall for MS hook complete all as specified and directed.

S&F in repair Stop valve,20 mm cast copper alloy with long shank &cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed fancy type complete

S&F in repair 15mm angular stop valves, fancy type chromium plated, with long shank and cup(concealed) screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

S&F in repair 15mm stop valves , fancy type chromium plated (Concealed type), screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

S&F in repair Bib tap fancy type cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs .

S&F PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe 10 Ltr capacity complete all as specified. Fixed in repairs.

S&F PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete

S&F Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified

S&F in repair Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets 32 mm waste coupling and waste pipe all as specified and directed by Engineer - in - Charge.

S&F brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union.

S&F Brass chromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n exc 4.00 sam each all as specified.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 Sqm each complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) quality- A

Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling etc., complete all as specified and directed.

S&F 25 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood 35mm thick factory made plain, framed, panelled shutters (two panels) withlock rail and panel of 9mm BWP commercial ply or12mm veneered particle board with commercialveneering on both faces. The size of rail and stile asper IS : 1003 (Part-I), kiln seasoned and chemically pressure treated

S&F glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item.

ditto above but as in glazed windows.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.

M&L steel ventilator with top hung shutter including hinges steel peg stay complete.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

S/F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

M&L 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

M & L for 18-19 mm thick for external teak wood lipping, 6mm thick fixed with nails

S&F floor door stopper aluminum alloy body anodized with hard drawn steel spring overall length 150mm

S&F continuous piano hinges mild steel bright finish of flap width 40mm

S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished

M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F Ball catches with 8mm dia steel ball and brass body and striking plate

Preparation of new wood and wood based surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks.

M&L mild steel work as in holdfasts, knee piece and similar small article complete all as specified.conforming to Fe-290 Gde-E-165

S&F 250mm long Aluminum alloy, anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminum alloy and fixed.

Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate

S&F Aluminum anodized barrel tower bolt of extruded section of size 150mm

S&F extruded Aluminum alloy handle fabricated of size 150mm all as specified and directed

Mild steel Helical door spring 150 mm long including roller plate, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

Demolition of cement concrete (Unreinformed) in ground floors and paving n exc 15 cm thickness (below or above ground level)

M&L for cement concrete type E-2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) to receive the top layer of tiles

M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer CM 1:6 complete all as specified.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skriting set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 10mm thick rendering as backing coat of CM 1:4 complete all as specified.

M&L for vitrified ceramic tiles light shade 10 mm thick (Square/rectangular) polished m area of each tiles not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in CM 1:6 complete all as specified.

M&L for vitrified ceramic tiles light shade 10 mm thick (Square/rectangular) polished m area of each tiles not exceeding 0.36 Sqm , in skriting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering as backing coat of CM 1:4 complete all as specified.

M&L for coloured glazed tiles of size 350x250x7 mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for 18 to 25 mm thick machine in cut kota stone slab for treads & landings of stair cases over and incl 15mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and with beeswax polish finish polishing complete all as specified and directed by Engr-in-Charge.

M&L for 20 to 25 mm thick machine in riser or steps skriting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting rubbing and with beeswax polish incl 10 mm thick rendering all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies , deck slabs and in shelves and the like complete all as specified and directed.

Mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape require including, cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves , landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed

Dismantling asbestos cement (corrugated / semi corrugated ) sheets and ridges in roof coverings complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed`

S&F rolled sections as in main and cross beams,hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-410-W complete all as specified and directed by EIC.

S&F pre-painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of colour (as approved by users) having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws asspecified.

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

S&F 1.25 mm lath steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc. complete and making good disturbed surfaces of walls ceiling etc. all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking down sub main wiring of two single core PVC cable PVC insulated 6/4 sqmm size cable including conduit or wooden batten and removing the material from site and making good the surfaces of walls, ceiling etc. all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking out unserviceable main switch/DB's complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), drawn in and including PVC concealed conduit medium grade (ISI marked) with accessories like bends, tee junction boxes fixed on wall, ceiling etc. with sunk mild steel pressed terminal box 1.6mm thick sheet duly painted with two coats of black bituminous paint over a coat of red oxide primer and providing 3mm thick laminated bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light / call bell / fan point controlled by one, one way switch complete all as specified and as directed.

All as per Ser item No.120.00, but 2 way point controlled by one two way switch all as specified and directed.

All as per Ser item No.120.00, but for 5 amps socket on independent board complete all as specified and directed.

All as per Ser item No.120.00, but for 5 amps socket on same board complete all as specified and directed.

All as per ser item No. 120.00, but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M&L for point wiring with 4 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit fire proof ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3 mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 2.5 sqmm (nominal area) green colour as earth wire connected with earth dolly complete all as specified and as directed for One light point controlled one switch.

S&F switch modular type, 5 Amps, flush type, single pole, one way single pole complete all as specified.

S&F switch modular type, 16 Amps, flush type, single pole, one way single pole complete all as specified.

S&F switch modular type, 5 Amps, flush type, single pole, two way single pole complete all as specified.

S&F modular multi flush type multi pin 5 Amp complete all as specified and directed.

S&F modular switch outlet universal type 6 pin5/15 amps multi pin universal complete all as specified and directed.

S&F modular bell push,flush type, 5 amps, SP, one way, 230 volts AC complete all as specified and directed.

S&F galvanized sheet metal termination box 18 way with module plates suitable for ROMA switches and sockect, concealed including chase cutting and making good to the distrubed surface complete all as specified and directed.

All as per Ser item No. 132.00 Here-in-before but 12 way

All as per Ser item No.132.00 Here-in-before but 8 way

All as per Ser item No.132.00 Here-in-before but 6 way

All as per Ser item No.132.00 Here-in-before but 4 way

All as per Ser item No.132.00 Here-in-before but 3 way

All as per Ser item No.132.00 Here-in-before but 2/1 way

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp 240 V 10 KA complete all as specified and as directed.

M&L sub main wiring two single core 6 sqmm PVC insulated stranded copper conductor FRLS wires drawn through PVC rigid concealed type conduit and conduit accessories and one single core 6 sqmm PVC insulated FRLS type with stranded copper conductor wire for continuous earth continuity conductor complete all as specified.

M&L sub main wiring two single core 4 sqmm PVC insulated stranded copper conductor FRLS wires drawn through PVC rigid concealed type conduit and conduit accessories and one single core 4 sqmm PVC insulated FRLS type with stranded copper conductor wire for continuous earth continuity conductor complete all as specified.

Supply and fixing lamp holder PVC, insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate and isolated body complete all as specified and as directed.

Supply and fix ceiling fan regulator electronic rotary Step type not less than 300 watt, single phase A/C 230 volts all complete as specified and directed.

Supply and fixing MCCB DB, TPN 4 way vertical type with single/three phase outgoing with provision for MCCB as incoming 415 volts with 200 amps rated bus bar complete all as specified and directed.

Supply & fixing MCCB 4 pole of capacity 100 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangement all as specified and directed by Engineer -in-Charge.

Supply & fixing for sheet metal for DB's with 200 Amps rated copper bus bar, double door epoxy coated inside and outside SPN 08 way complete all as specified and directed.

Supply & fixing MCB SPN 63 amps DP 240 volts complete all as specified and directed.

Supply, fixing and connecting MCB SP 6 to 32 Amps, 240V, 10 KA complete all as specified.

Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 12.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level connected to GI earth wire will be protected by 15 mm dia GI pipe light grade GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level. PCC chamber recessed for and including CC cover including all necessary excavation and earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion all as specified and directed. Note :- Result should be less than 3 Ohm.

Supply, fixing ceiling fan 1200 mm sweep, 230/240 V complete all as specified.

Taking down geyser and refixing the same after repairs and painting complete all as specified.

Supplying, Laying, jointing and testing LT underground XLPE insulated armoured heavy duty electric cable PVC sheathed with stranded aluminium conductor, 1100 volts grade of size 50 Sqmm 4 core, laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50 mtr wide and n. exc. 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick each layer complete all as specified and directed.

Material and labour sand for cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Removal of surplus spoil to a distance n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

Supply and fixing in replacement LED battern light fitting 20W (double side) decorative ultra slim aluminum square profile LED light fixture 6500K (white light) fixture box type with retrofit LED rod 20 Watt and connecting electricity to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed

Supply and fixing in replacement decorative wall mounting type with colour ABS housing with polycarbonate range and glass shade with LED retrofit lamp 6500K (white colour) complete city-1 with 5W LED Lamp all as specified and directed

Supply and fixing in replacement LED street light fitting 20W including LED lamp pressure die cast aliminum IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting including all fittings as specified and directed by Engr-in-Charge

Supply and fixing exhaust fans AC single phase 230/240 V of size 300 mm sweep with louver, including cutting hole on wall as required for fixing and electrical connection upto ceiling rose

Supply and fixing exhaust fans made out of sturdy engineering plastic, AC single phase 230/240 V of size 250mm sweep with louver, including cutting hole on wall as required for fixing and electrical connection upto ceiling rose

THAPAR CONSTRUCTION COMPANY

M/S Vinod Kumar

M/S Kuldip Construction Co.

SARASWATI CONSTRUCTION CO

JAGDISH KUMAR SEHGAL

KABEER CONSTRUCTIONS