Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.8 CrAccepted-AOC | ₹33.8 Cr Quoted ₹35.9 Cr | 1 | Accepted-AOC 1 |
Tender Value
Refer Docs
EMD Value
₹17.1 L
Closing Date
24 Jan 2020, 5:00 pmClosed
Executive Engineer, P.W. Divn., Jalgaon
Executive Engineer, P.W. Divn., Jalgaon
Improvement to Arterial, Sub Arterial, Collector street and Local street Roads, RCC gutters, Construction of Nallah, water supply, Development of Open spaces, (Chain link fencing, jogging track, playing and Gym instruments), Development of Smashanbhu
2019_PWR_527210_1
E-Tender Notice No. 44 For 2019-2020
Open Tender
Civil Works
730 days
JALGAON
Pl. refer tender documents
8 documents required · 8 mandatory
₹3,540
via Net Banking
₹17.1 L
24 Feb 2021
31 Dec 2019
27 Jan 2020
31 Dec 2019
24 Jan 2020
31 Dec 2019
Amount
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.
Providing, laying, spreading and compacting hand broken metal aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ Hard Murum blindage as binding Materials to fill up the interstices of aggregate, watering and compacting with power roller to the required density. (Using 60 milimetre metal)
Providing, laying, spreading and compacting hand broken metal aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ Soft Murum blindage as binding Materials to fill up the interstices of aggregate, watering and compacting with power roller to the required density. (Using 40 milimetre metal)
Supplying hard murum/ kankar at the road site, including conveying and stacking complete.
Spreading hard murum/ soft murrum/ gravel or kankar for side width complete
Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.
Providing and constructing 50 milimetre thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40 milimetre stone metal layers 30 percent crusher broken metal + 70 percent Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kilogram per squaremetre, spreading 12 milimetre size chips compacting with static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing Water Bound Macadam surface.(VG-30 bulk bitumen rates are considered to arrive at rates)
Providing and constructing 50 milimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone layers metal 30 percent crusher broken metal + 70 percent Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75 kilogram per squaremetre, spreading 12 milimetre size chips compacting with Static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of bitumen 0f specified grade at the rate of 0.30 Kilogram per Squaremetre (on existing bitumen surface.)
BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 milimetre compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per Indian Road Congress-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen 3.30 percent of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates)
Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry Black Topped surface 3 kilogram per 10 squaremetre (VG-30 bulk bitumen rates are considered to arrive at rates)
Open Graded Premix Surfacing- Providing and Laying OGC 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller( over Black Topped Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)
Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 Kilogram per Squaremetre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)
Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer without SCADA with fine agreegates of required specifications (Natural sand )
Providing cast in situ / ready mix M15 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) without SCADA with fine agreegates of required specifications (Natural sand ), cement 5.90 bags per cubic metre)
Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanically Treated FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 milimetre thick including reflectorizing glass beads @ 250 grams per squaremetre area, thickness of 2.5 milimetre is exclusive of surface applied glass beads as per Indian Road Congress : 35 .The finished surface to be level, uniform and free from streaks and holes.complete.
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97 percent of standard Proctor density for a lead of over 50 metre to 300 metre inclusive from the site of excavation to the site of deposition as directed.
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and laying in situ / ready mix M-20 cement concrete of trap metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) without SCADA with fine agreegates of required specifications (Natural sand ), cement 6.40 bags per cubic metre)
Providing dry/ trap rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means
Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means
Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete.
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete.
Providing and laying in situ /Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing Burnt Brick-on-edge masonry with second class bricks of conventional type bricks in cement mortar 1:3 including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / one strips of hoop iron 25 milimetre X 1.6 milimetre placed at every third course, properly bent and bonded at ends, scaffolding, raking out joints and watering etc .complete.
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rupees 500/- including ponding test etc. complete.
Providing water proof bedding for flooring of Bath and Water Closet 25 milimetre thick in Cement Mortar 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rupees 500/- including ponding test etc. complete.
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.
Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Burnt Brick masonry and or tying by binding wire etc. complete.
Providing and laying handcut polished Kotah Stone flooring 25 milimetre to 30 milimetre thick and 30 centimetre wide in plain/diamond pattern on a bed of 1:6 Cement Mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 milimetre thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 milimetre thick for door frame/ dado/ window boxing etc. On Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standard 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring
Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standard 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary
Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.
Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 milimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.
Providing and fixing fiber glass reinforced polyster door shutter 30 milimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality etc. complete.
Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 kilogram per Running metre. with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 kilogram per Running metre. Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per Running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per Running metre. and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 kilogram per Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogram per squaremetre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
Providing and fixing 40 milimetre diameter and 1.5 milimetre thick Stainless steel hand railing in Stainless Steel 304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete
Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to Indian Standard 65241983 having 6 milimetre diameter bars 3 Numbers And strips @ 250 milimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 milimetre diameter bars 500 milimetre long including primer and oil painting etc, complete) frame size 60 milimetre x 125 milimetre
Providing and fixing White Glazed Earthenware full stall type Urinal with Poly Venyle Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimetre diameter Poly Venyle Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 centimetre size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including Unplasticised Poly Venyle Chloride waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.
Providing and fixing chromium plated towel rod 16 milimetre diameter and 75 centimetre in length including all accessories complete.
Providing and fixing 1st class white glazed earthenware Orissa Type Water Closet Pan 580 milimetre diameter including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 milimetre thick, 10 liter Poly Venyle Chloride flushing cistern with all necessary pipe connection etc. complete.
Providing and fixing 15 milimetre diaemeter screw down bib/ stop tap of brass including necessary socket union nut complete.
Providing and fixing screw down 15 milimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete
Providing and fixing screw down for 40 milimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete.
Providing and fixing 15 milimetre diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete.
Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod etc. complete.
Providing, laying and fixing Poly Venyle Chloride pipe of 110 milimetre diameter with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls/ ceiling/ floor 15 milimetre diametre Chlorinated Poly Venyle Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls/ceiling/floor 20 milimetre diameter Chlorinated Poly Venyle Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls/ ceiling/ floor 25 milimetre diametre Chlorinated Poly Venyle Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing on walls /ceiling/ floor 40 milimetre diameter Chlorinated Poly Venyle Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing 10 centimetre Poly Venyle Chloride nahani trap with grating etc. complete.
Providing and fixing Poly Venyle Chloride Rain water pipes of 110 milimetre outer diameter and having wall thickness of 2.2 to 2.7 milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Venyle Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Venyle Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
Providing and fixing European type white glazed earthenware water closet pan with Unplasticised Poly Venyle Chloride seat and lid with chromium plated brass hinges and rubber buffers including Unplasticised Poly Venyle Chloride and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 milimetre diameter Unplasticised Poly Venyle Chloride flush pipe with fittings and clamps ,20 milimetre diameter Unplasticised Poly Venyle Chloride overflow pipe ,mosquito proof couplings Galvanised Iron chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)
Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 kilogram with frame etc complete.
Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover medium duty 140 kilogram with frame etc complete.
Providing and fixing self supporting steel roofing system (Proflex) for a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, arch length 17.75 meter. The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2' x 7' and turbo ventilator of 24'' diameter to be installed at every 30 feet along the length of roof including finishing, testing and cleaning etc. complete.
Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kilogram to 20 kilogram Per Square metre) Spec.No.: As directed by Engineer- in-charge.
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete.
Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.
Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etc. complete.
Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with Poly Venyle Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimetre diameter Poly Venyle Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
Providing and erecting chain link fencing 1.6 Metre height with Galvanised Iron chain link of size 50 x 50 milimetre, 8 gauge thick and fixed 75 milimetre above ground level on vertical Mild Steel Angles of 40 x 40 x 6 milimetre size, includind excavating pits for foundation and embedded in Cement Concrete block of 1:4:8 mix of size 450 x 450 x 670 milimetre at 1.75 Metre Centre to centre with iron bar 16 milimetre diameter as hold fast including welding link with angle frame at 30 cm centre to centre with nuts and bolts and horizontal Mild Steel Angles at top and bottom of 25 x 25 x 5 milimetre size and vertical Mild Steel flat 35 x 5 milimetre and 25 x 5 milimetre horizontal including cross support of 40 x 40 x 6 milimetre angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 milimetre including 3 coats of oil painting etc. complete.
Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing fly ash brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.
Providing internal cement plaster 20 milimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.
Providing fine cement finish 1.5 milimetre thick over green plaster surface including scaffolding curing etc. complete.
Providing and laying Rough Shahabad Stone Flooring 25 milimetre to 30 milimetre thick and of required width in plain/ diamond pattern on a bed of 1:6 Cement Mortar including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.
Providing and laying matt finish ceramic tiles of having size 30 centimetre x 30 centimetre confirming to Indian Standard 15622/2006 (group D II-A) and 7 to 8 milimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.
Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre, confirming to corresponding Indian Standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
Providing and fixing mild steel grill gate with angle iron frame 65 milimetre x 65 milimetre x 10 milimetre with iron bars at 150 milimetre Centre to Centre and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram per Square metre.
Providing and fixing 900 milimetre high Stainless Steel 304 Grade Stainless steel railing with 40 milimetre diameter and 1.5 milimetre thick at top,40 milimetre diameter and 1.5 milimetre thick vertical supports spaced at 1.5 metre center to center and 8 milimetre thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete
Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to Indian Standard 65241983 having 6 milimetre diameter bars 3 Numbers And stirrups @250 milimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 milimetre diameter bars 500 milimetre long including primer and oil painting etc, complete) frame size 60 milimetre x 100 milimetre.
Providing and fixing Indian Standard Institute mark Double leaf shutter of 30 milimetre thick for solid core flush door, decorative type of exterior grade as per detailed drawing or as approved Laminates (Formica) on both faces, all necessary beads, moulding and lipping stainless steel heavy weight butt hinges chromium plated fixtures & fastenings, hanhies on both sides and finishing etc. complete. (Without frame).
Providing and fixing Single leaf shutter of 35 milimetre thick, for solid core flush door, decorative type of exterior grade as per detailed drawings or as approved Laminates Formica on both faces venetians, all necessary beads, moulding and lipping, brass oxidized / aluminum with power coating fixture and fastenings _____ chromium plated handles on both sides and finishing etc. complete. (without frame)
Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 milimetre square at 10 centimetre centre to centre.)
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 metre) By Mechanical Means
Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.
Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete.
Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre and confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans 5 milimetre thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 milimetre 10 centimetre centre to centre and oil painting 2 coats etc. complete.
Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete.
Providing and fixing green marble of 18 to 20 milimetre thick for door frame/ dado/ window boxing etc. On Cement Mortar 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.
Providing and fixing 75 milimetre diameter stabiliser pipe/ Poly Venyle Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
Providing and laying in trenches 15 mm diameter Chlorinated Poly Venyle Chloride pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and laying in trenches 25 milimetre diameter Chlorinated Poly Venyle Chloride pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
Providing and fixing 25 milimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.
Providing and laying damp proof course 50 milimetre thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.
Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the lefters/figures with approved colour and shade complete
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal for Reinforced Cement Concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand )
Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing and fixing corrugated galvanised iron sheets of 0.63 milimetre thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kilogram per square metre).
Providing and laying machine cut machine Polished Kota stone flooring 25 milimetre to 30 milimetre thick and required width in plain/ diamond pattern on bed of 1:6 Cement Mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.
Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 milimetre diameter / 2 hoop iron strips 25 milimetre X 1.6 milimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.
Providing and fixing solid core flush door shutter commercial in single leaf 32 milimetre thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.
Providing and fixing Orissa type white glazed earthenware 575 milimetre water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.
Providing and fixing coloured glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Poly Venyle Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.
Providing and fixing High Density Plastic container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand )
Providing and fixing black kadappa stone as shelves 25 milimetre thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.
Providing and laying in situ cement concrete M -30 with tremix treatment for 200 milimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 milimetre wide and 20 milimetre deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete
Providing and laying in situ / ready mix M-15 plain cement concrete of trap metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in Cement Mortar 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in following manners (a) Height upto 5 Metre (With Concrete Mixer)With fine agreegates of required specifications (Natural sand ) i) Height up to 5 metre, normal rate.
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)
Providing and laying weep holes of 100 milimetre diameter Poly Venyle Chloride pipes as per drawing for abutment returns, return walls etc. Complete.
Providing expansion joints with 25 milimetre thick bituminous pad as per detailed drawings etc. complete.
Providing Second class fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter / two hoop iron strips 25 milimetre x 1.60 milimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.
Providing sills of required material 20 milimetre to 25 milimetre thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.
Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 milimetre thick ACP sheet material consisting of 3 milimetre thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 milimetre thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 kilogram per square metre)
Providing and laying ceramic tiles having size 30 centimetre x 45 centimetre confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
Providing and fixing 45 centimetre wide mild steel ladder of 40 milimetre x 6 milimetre mild steel flat stringers and steps of 18 milimetre diameter mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 centimetre x 30 centimetre x 30 centimetre and painting the ladder complete. (Anti Corossive Paint)
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Mild Steel pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, nsurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI and GOM in all respect etc. complete as per Indian Standard - 3589 and Indian Standard-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 450 MiliMetre Diameter Mild Steel pipe 10 milimetre thick
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Mild Steel pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, nsurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI and GOM in all respect etc. complete as per Indian Standard - 3589 and Indian Standard-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 750 MiliMetre Diameter Mild Steel pipe 10 milimetre thick.
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Mild steel pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, nsurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI and GOM in all respect etc. complete as per Indian Standard - 3589 and Indian Standard-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 450 MiliMetre Diameter PN 1.6
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Mild steel pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, nsurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI and GOM in all respect etc. complete as per Indian Standard - 3589 and Indian Standard-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 750 MiliMetre Diameter PN 1.6
Supply of Cast Iron Mechanical joint Double Socket with Flanged Tees dimensionally described in Table -19 of Indian Standard - 13382/1992 complete with sealing rubber gasket of S.B.R.( dimensionally described in Indian Standard-12820/1989) with cast iron follower gland and mild steel nut bolts coated or galvanised coated or otherwise protected from rusting and suitable for Cast Iron pipes.. 450X450X450 Tee
Supply of Cast Iron Mechanical joint Double Socket with Flanged Tees dimensionally described in Table -19 of Indian Standard - 13382/1992 complete with sealing rubber gasket of S.B.R.( dimensionally described in Indian Standard-12820/1989) with cast iron follower gland and mild steel nut bolts coated or galvanised coated or otherwise protected from rusting and suitable for Cast Iron pipes.. 750X750X750 Tee
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Mild Steel pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, nsurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI and GOM in all respect etc. complete as per Indian Standard - 3589 and Indian Standard-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 900X900X900 Tee
Supply of Cast Iron Mechanical joint Double Socket with Flanged Tees dimensionally described in Table -19 of Indian Standard - 13382/1992 complete with sealing rubber gasket of S.B.R.( dimensionally described in Indian Standard-12820/1989) with cast iron follower gland and mild steel nut bolts coated or galvanised coated or otherwise protected from rusting and suitable for Cast Iron pipes.. 750X450Reducer
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated Mild steel pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, nsurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI and GOM in all respect etc. complete as per Indian Standard - 3589 and Indian Standard-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 900X750Reducer
Supply of Cast Iron Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of Cast Iron Spun Pipes ( as per - Indian Standard - 1536 /2001) and D. I. Pipes ( as per Indian Standard: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, Cast Iron. Follower Glands and Mild Steel Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in Indian Standard:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. 450 MiliMetre Diameter Socket tail pice
Supply of Cast Iron Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of Cast Iron Spun Pipes ( as per - Indian Standard - 1536 /2001) and D. I. Pipes ( as per Indian Standard: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, Cast Iron Follower Glands and Mild Steel Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in Indian Standard:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. 750 MiliMetre Diameter Socket tail pice
Supply of Cast Iron Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of Cast Iron Spun Pipes ( as per - Indian Standard - 1536 /2001) and D. I. Pipes ( as per Indian Standard: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, Cast Iron Follower Glands and Mild Steel Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in Indian Standard:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. 850MM Dia.Socket tail pice
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.
Transporting within 500 meters, laying in position to correct line and level Mild Steel specials pipes with / without any outcoating, such as distance pieces, straps, bends, tapers, etc. on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding, the same. The rate to including loading, unloading, hoisting, ect. complete as specified. From 750 to 1000 milimetre diameter.
Blast cleaning the surface of the old or new pipeline internally to remove all rust etc. complete, including providing sand, machinery, labour, cutting of pipes at required places and rewelding the same etc, complete as directed by Engineer-in-charge. (Pipes pieces if required for rewelding of old pipeline shall be paid separately.)
Providing and applying primer and one coat of red oxide of iron, paint, internally, including cleaning the surface of the pipes with steel scrappers, wire brushes, and metal cleaning solution, etc.
Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness
Welding in all positions with required number of runs, for Mild Steel pipes internally and / or externally including gauging wherever necessary, fixing appurtenan ces and other accessories in connection with pipe laying work as per specification.
Providing and making flanged joints to flanged Cast Iron /Mild Steel pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete. 450 milimetre diameter
Providing and making flanged joints to flanged Cast Iron /Mild Steel pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete. 750 milimetre diameter
Lowering laying in position to correct line and level including Mild Steel pipes with / without any outcoating on pedastals or chairs upon prepared formation. The rate to include loading, unloading hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 Metre etc. completed as specified. 450 milimetre Mild Steel pipe
Lowering laying in position to correct line and level including Mild Steel pipes with / without any outcoating on pedastals or chairs upon prepared formation. The rate to include loading, unloading hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 Metre etc. completed as specified. 750 milimetre Mild Steel pipe
Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and excluding hydraulic testing etc. complete. (Rate for all class of valves.) 450 MiliMetre PN6
Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and excluding hydraulic testing etc. complete. (Rate for all class of valves.) 750 MiliMetre Dia.PN6
Rent for welding set with generator set 450 MiliMetre Diameter Socket tail pice
Making cross connection to existing distribution main of any type including excavation, breaking and removing exiting pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores). 450 milimetre diameter
Making cross connection to existing distribution main of any type including excavation, breaking and removing exiting pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores). 750 milimetre diameter
Making cross connection to existing distribution main of any type including excavation, breaking and removing exiting pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores). 900 milimetre diameter.
Providing and casting in situ Cement Concrete of trap metal of approved quality for Reinforced Cement Concrete work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with Cement Mortar 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L and T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted )
Providing and constructing Burnt Brick masonry valve chamber with 15 centimetre thick 1:3:6 proportion Plain Cement Concrete bedding, excluding excavation, Burnt Brick masonry in Cement Mortar 1:5 Proportion precast Reinforced Cement Concrte frame and cover, etc. complete as directed by Engineer-in-charge.
Providing, supplying and fixing of Open Gym equipments at site all complete (Thaichi spinner 4 wheel)
Providing, supplying and fixing of Open Gym equipments at site all complete (Standing seating twister)
Providing, supplying and fixing of Open Gym equipments at site all complete (Shoulder builder)
Providing, supplying and fixing of Open Gym equipments at site all complete (Air walker)
Providing, supplying and fixing of Garden Playing equipments at site all complete (Arch Swing )
Providing, supplying and fixing of Garden Playing equipments at site all complete (FRP web skide 1.50 m)
Providing, supplying and fixing of Garden Playing equipments at site all complete (4 seater Merry Go Round)
Providing, supplying and fixing of Garden Playing equipments at site all complete (Standard Sea Saw)
Providing, supplying and fixing of Garden Playing equipments at site all complete (Square Jungle Gym)
Providing, supplying and fixing of Open Gym equipments at site all complete (Three in One Gym)
Providing, supplying and fixing of Open Gym equipments at site all complete (Cycle)
Providing, supplying and fixing of Garden Playing equipments at site all complete (Two Seater Zoola)
Providing, supplying and fixing of Garden Playing equipments at site all complete (Slide)
Providing, supplying and fixing of Open Gym equipments at site all complete (Chest Press)
Providing, supplying and fixing of Open Gym equipments at site all complete (Cross Trainer)
Providing, supplying and fixing of Garden equipments at site all complete (Dust Bin-Rabbit)
Providing, supplying and fixing of Garden equipments at site all complete (Dust Bin-Penguin)
Providing, supplying and fixing of Garden equipments at site all complete (Garden Bench)
Providing, supplying and fixing of open Gym equipments at site all complete (Leg press)
Providing, supplying and fixing of Garden Playing equipments at site all complete (Swing Zoola)
Providing, supplying and fixing of open Gym equipments at site all complete (Sky walker)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid