E-tender/Eng/EQ-345/25-26

Distribution wiring in 2x22/0.3(1.5sq.mm) single core stranded FR PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit FR with 1x22/0.3(1.5sq mm) single core stranded "FR" PVC insulated…………..Modular type switch fixed on MOD GI switch board ....2no suitable size ph& N...original finish a) Ave run...8mtr.[PWD SCH 2017E24/1c

b) Ave run 9mtr [PWD SCH 2017 E241d

c) Ave run 10mtr [PWD SCH 2017 E24 1e

Distribution wiring in 1.1KV grade 22/0.3(1.5sq.mm)single core stranded FR PVC insulated &unsheathed copper wire in 20mm size pvc rigid conduit FR with 1.1KV grade 1x22/0.3(1.5sq.mm)…to 6A 3pin mod type plug socket & switch on 4mod GI switch oard…..building works a] On Board [PWD SCH 2017 E24 /3a

b) Ave run 6mtr

S&F240V 4nos 6A 3pin mod type plug socket with 4nos6A mod type switch,16A mod switch type MCB…2row 18 mod top cover…..continuity wire etc E18/12

S&F 240V , 3nos16A 3pin mod type plug socket with 3nos 16A mod type switch 20A mod switch type SP MCB & indicator without plug top on 2row 12 mod GI mod type switch board…..continuity wire etc E18/13

S&F 240V ,16A 3pin mod type plug socket with 16A mod type switch without plug top on 4 mod GI mod type switch board…..continuity wire etc [E18/9b]

S&F 240V,25A mod type socket,25A mod type starter with 25A mod switch type DP MCB &6 mod GI….earth continuity wire etc [ E19/16]

S&F D/D horizontal SPN MCB DB with IP42/43…with neutral link & provision for earthing attachment 2+12way,Legrand,Schneider,L& T incl 12 nos S & F SP MCB of 6-32A rating,c Curve & one no DP Isolator of 63A [D9/13]

Disrtibution wiring in 1.1KV single core stranded FR PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit FR…as required a)2x22/0.3(1.5sq.mm)+ 1x22/0.3(1.5sq.mm) ECC

b)2x36/0.3(2.5sq.mm)+ 1x22/0.3(1.5sq mm)ECC

c)2x56/0.3(4sq.mm)+1x36/0.3(2.5sq.mm)ECC

d)4x80/0.4(10sq.mm)+2x84/0.3(6sqmm) ECC

supplying &Laying of cable as below on existing cable tray & binding with suitable GI wire…of PVc Arm.cable with AL.conductors 1.1 kv grade conforms to IS:1554(part 1)for following cross section 1x 16sq.mm 2C [market price basis]

S& F compression type gland with brass gland,brass ring,rubber ring for dust & moisture proof entry..as below& fixing only the end with dowels make socketa x 16sq.mm 2C [PWD SCH 2017

Earthing with 50mm dia GI pipe3.64mm mmx thick x3.04 mtr wire 4mtr long,13mmdiax80mm long gi bolts,double nuts,double washers incl S & F15mm dia GI pipe protection….below the GL as below;By ISI-Med GI Pipe

Excavation of soil for installation of earth electrode & filling & ramming a) for soft soil

Extra for providing masonary enclosure on the top of the earth electrode overall size 86.36x86.36x46 cm deep……. GI pipe

S & F earth busbar of galvanized MS flat of 25x6 mm on wall having clearence of 6mm incl providing of drilled holes…….as required

connecting the equipment to earth busbar incl S& F GI wire of size as below on wall staples inside wall as reqd & making connection with equipments with nut bolts etc & mending good damages. 10SWG

Dismantling of existing electrical installation ( ceiling fan.tube s,conduit,SFU,fuse DB etc r