Extension of additional floors in trauma centre at IGMC Shimla SH Providing fire fighting and sprinkler system therein

Amount

SUB HEAD-II - (HYDRANTS SYSTEM)

Supplying and fixing Single Headed Internal Hydrant Valve oblique pattern with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked, conforming to IS : 5290 (Type A), with 80 mm dia flanged inlet, with ABS cap and chain complete with all accessories etc. as required.

Supply, Installation, Testing and Commissioning of 63 mm dia. 15 Mtr. Long RRL hose pipe with 63 mm dia. male and female stainless steel couplings duly binded with GI wire rivets etc. ISI marked, IS 636 (type-A) as required.

Supplying and fixing 63 mm dia. Stainless Steel branch pipe with 20mm dia nozzle conforming to IS:903. suitable for instantaneous connections to hose pipe coupling etc. as required.

Supplying and Fixing First Aid Hose Reel, wall mounting swinging type complete with drum & bracket of MS construction, spray painted in Post office Red, confirming to IS 884/1995 with upto date amendments, complete with the following as required.

36 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced) Type - 2 as per IS : 12585

20 mm dia. ball valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connection from riser with 40 mm dia (Gun metal) stop valve & M.S. Pipe.

Providing and fixing 15 mm dia chrome plated quartzoid type Sprinkler Head with quartzoid bulb and set to operate at specified temperature.

Pandent, 68° C

Upright, 68° C

Supplying and fixing vane type water flow switch suitable for installation on 50 mm to 150 mm dia line for a service pressure upto 20 kg/sq. cm. of Potter / System sensor /Angus

SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES)

Supplying, laying, fixing, testing and commissioning of following sizes (NB) of class 'C' M.S. pipes confirming to IS 1239 and 3589 including cutting, threading, welding etc. and providing all fittings e.g. elbows, reducers, clamps, hangers, flanges, gaskets, nuts, bolts and washers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and shade including cutting holes and chases in brick or RCC walls/slabs and making good the same etc. complete in all respect as required.

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

Supplying, Installation, Testing and Commissioning of Butterfly valves of PN 1.6 rating of following sizes with EPDM rubber lining seat and CF-8 stainless steel disc duly ISI marked and stainless steel stem with lever/gear operation and cast iron body in powder coated finish for fire fighting application complete in all respects confirming to IS: 13095 as required.

150 mm dia

100 mm dia

80 mm dia

50 mm dia

Providing, Installation, Testing and Commissioning of Gun Metal / Bronze Ball Valves screwed ends of following sizes as required. (For sprinkler drain)

25 mm dia

Supplying and fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.

Providing & fixing angle iron (40mm x 40mm x 5mm ) door frame and MS sheet (2mm thick) cum glass shutter of size 2.1 mtr x 1.2 mtr (N.S) with 25mm x 25mm x 3 mm angle frame all around & stiffened in between including hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including providing & Fixing MS sheet 2mm thick on remaining portion above door to close opening i/c painting etc. as required.

SUB HEAD - IV - (FIRE EXTINGUISHERS)

Supply, installation, testing and commissioning of ISI marked (IS:15683:2006) portable chemical fire extinguisher, water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications.

Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006

4.5kg capacity cylinder

Providing and fixing Dry Chemical Powder ( D.C.P) type Fire Extinguisher (IS:15683:2006) with 10 kg capacity

KHARBANDA ELECTRICALS