Smart City Project in NDMC Area.

Amount

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge., In cement mortar.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : bituminous road

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 ( 1 cement : 4 manufactured sand derived from recycled concrete aggregate (RCA) :8 graded stone aggregate 20 mm nominal size recycled aggregate(RA)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 ( 1 cement : 2 coarse sand (zone III) including manufactured sand derived from recycled concrete aggregate (RCA) upto 25% :4 graded stone aggregate 20 mm nominal size including recycled concrete aggregate(RCA) upto 25%.

Centering and shuttering including strutting, propping etc. and removalof form for : Foundations, footings, bases of columns, etc. for mass concrete

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand).

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished seamless type tubes kg 157.50.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm.

Providing and laying gang saw cut 30 mm thick of all shades and in all finishes like, lapato / flamed / shotblast / leathered, etc. pre moulded machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas, planters, seaters and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Fabrication and manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessories for walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutout/ holes of required sizes for services, yard handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineer-in- Charge (Cost of reinforcement, Mechanical, Electrical and Plumbing inserts will be paid separately). Concrete grade M-35 (Cement content 370 kgs).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work.

Providing and fixing in position CNC LIGHT Column in 6 mm thick MS plates. having three plates of size 0.50 m widthx 2.66 m height connected from long sides and standing vertically. with triangular Top covered with 3 nos Triangular MS plates of suitable size. Providing, cutting, fixing in position i:c Charges for required pattern/ design by CNC machine erection at site necessary painting with synthetic enamel paint of inner faces and matt finish deco paint of outer faces i:c preparation of sunfare etc complete as per drawings approved by Engineer in charge i:e. rates are inclusive of 8 mm thick MS plate sheet required for making column

Providing and fixing S.S Post including frame of grade 304 pipes with braces of S.S grade 304 and rectangular section including cutting, organ welding, grading,making circustances polishing, buffing etc. complete with necessary holes, nuts & bolts,caps & anchor plates of S.S grade 304 ASTM as per drawing & instructions of the Engineer-in-charge excluding the cost of RCC/CC and earth work.

Providing, cutting,hosting and fixing in position including fabrication of 3mm thick Aluminium Composite material Sheet (ACM) made of two aluminum sheet of 0.25mm thick eah having a distance of 2.50mm thick field with rubber polymer to the entire satisfaction of Engineer-in-Charge. Confirming to various concerned ASTM Standards ( Measurement to taken of the face area of Sheet ).

Providing and fixing in position high bond(VHP) double tape 24mm wide 2.3mm thick for jointing ACM/ Aluminum sheet with SS frame including all processes like cleaning, cutting, chemical application pressing etc. as per the sample approved by the Engineer in Charge.

Providing and fixing grade IX retro reflective sheet of required color as per ASTM-D4956-07 in single layer over ACM/Aluminium sheet complete with necessary adhessive and pressure method etc. the sheet layer of type-9 sheet shall be on full face of ACM/ Aluminium sheet with words/ directions, pictogram (picture), arrows, signs, shall be printed over the sheet, complete including cleaning and pasting etc. all as per drawings and direction of Engineer in Charge. (Payment shall be made for flat area of sheet only)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading the same at any C & D waste management site within 25 Kms, lead i.e Shastri Park / Burari / Mundka including weighing at plant etc. complete as per direction of Engineer in charge. Weighing and unloading at plant shall be as per procedures / rules of the plant management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C & D waste plant. The processing fee of C & D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts.

(Minus Item) Purchase and taken away the dismantled material seviceable/ unserviceable which is to be received from the work shall be taken away by the contractor as and where basic for which cartage shall be born by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. Sand Stone Slab

(Minus Item) Purchase and taken away the dismantled material seviceable/ unserviceable which is to be received from the work shall be taken away by the contractor as and where basic for which cartage shall be born by the contractor himself and against these material payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. CC interlocking paver blocks

(Minus Item) Purchase and taken away the dismantled material seviceable/ unserviceable which is to be received from the work shall be taken away by the contractor as and where basic for which cartage shall be born by the contractor himself and against these material payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. CC kerb stone of size 0.3 x 0.2 x 0.10 m (average)

(Minus Item) Purchase and taken away the dismantled material seviceable/ unserviceable which is to be received from the work shall be taken away by the contractor as and where basic for which cartage shall be born by the contractor himself and against these material payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. CC kerb stone of size 0.3 x 0.3 x 0.15 m with one edge curved.

(Minus Item) Purchase and taken away the dismantled material seviceable/ unserviceable which is to be received from the work shall be taken away by the contractor as and where basic for which cartage shall be born by the contractor himself and against these material payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. Dismantled Steel

(Minus Item) Purchase and taken away the dismantled material seviceable/ unserviceable which is to be received from the work shall be taken away by the contractor as and where basic for which cartage shall be born by the contractor himself and against these material payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. Old Bricks

Electrical Works Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15mm dia G.I.pipe from earth electrode including connection with G.I thimble excavation and re-filling as required.

CABLE LAYING AND END TERMINATIONS Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required Upto 35 sq. mm .

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle).

Supplying and laying of following size P-N-4 HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 90 mm dia (OD-90 mm & ID-76 mm nominal) meter

120 mm dia (OD-120 mm & ID-103 mm nominal) meter

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : (a) With F.P.S. bricks

Supplying and making end termination of 1.1 KV grade copper/aluminium multicore cables of the following sizes. The work includes sizing the core leads, removing insulation, fixing suitable crimping type aluminium lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. (a) 4C25sq.mm. AL armoured

(b) 4C16sq.mm. AL armoured

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 3 x 2.5 sq. mm

NON SCHEDULE ITEM Supplying of following types and sizes of 1.1 KV grade XLPE insulated copper / aluminium conductor armoured cable conforming to IS: 7098 (a) 3.5 CX25sq.mm. AL armoured

4CX16sq.mm. AL armoured

3CX4.0sq.mm. CU armoured

3CX2.5 sq.mm. CU armoured

Supplying and making end termination with Pg Thread Standard Cable Glands - Polyamide gland and cu with pin type lugs for following size of PVC insulated and PVC sheathed / XLPE cu conductor cable of 1.1 kV grade as required. (a) 3C4.0sq.mm. CU armoured

3C2.5 sq.mm. CU armoured

Supplying Installation testing and commissioning of flange mounted hot dip galvanized (min 65 Micron) octagonal poles of 12 mtrs. height made from 4 mm thick HT steel plate having bottom dia of 200 mm & top dia of 100 mm complete with window full sleeve type cover arrangement at a height of 0.5 / 2 mtrs from the base for cable termination block etc. and galvanized base plate of size 320 mm x 320 mm x 20 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination :- a) Supplying and fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. G.I strips 4mm thick of suitable length and having suitable size tapped holes - 10nos. as reqd. b) Supplying and fixing of 63 Amp terminal block suitable for 25sq.mm conductor -4 nos. & shorting links – 5nos. on DIN channel i/c providing and fixing DIN channel of suitable length – 2 nos. on the existing laminated sheet. c) Supplying and fixing 6 Amp, SPMCB, ‘C’ Characteristics Curve - 2 No. Earth stud - 2Nos. welded at suitable height two nos. washers, springs washers & nuts. d) Cable support clamp suitable for 4cx16sqmm al cable.

Making 1:2:4 reinforced cement concrete foundation of size 750 mm.(L) X 750 mm. wide and 1800 mm. deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm. dia- 1960mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 2800mm (approx) - 10nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item below) and providing two nos. 90 mm. (O.D) DWC, HDPE Pipe for cable entry & exit as required. & Supplying and fixing 4 Nos. 25mm dia X 800 mm long GI foundation bolt (EN8 grade) with nuts, washer including 2 Nos. template of 4mm thick size 310 mm x 310 mm with 4 nos. 28mm dia holes, to match with PCD of Pole base plate as reqd. (for 12 mtrs / 10 mtrs), (10 nos. octagonal pole of 10 mt. shall be provided by NDMC).

Fabrication, Designing, Supplying & Fixing of Galvanized arm street light pole bracket with tightening bolt etc. as per existing design of brackets of roads where the street light pole bracket to be fixed or as per approved by Engineer-In-Charge. peacock type double arm bracket

Digging, Shifting of street light octagonal / steel tubular pole of lenght 8m/10m/12m i/c relocated with foundation of existing pole by using hydra crane with proper safety, i/c installation of pole at new marked location and making proper cable connection etc complete as required. (a) Street Light

SITC of following wattage heavy duty LED street Light fittings having powder coated pressure die cast housing with separate compartment for LED driver dully provided with secondary optics for better distribution of light as per technical specification for outdoor luminiaries given in terms & conditions i/c dismantling of existing HPSV light fixtures (250 to 400watt) with proper safety tools and equipments etc. complete as required. 150 watt (indivisual control light, 3000K CCT) street light with high power LED & electronic driver etc complete as required. Make-Philip / Havells or equivalent. With 5 Years guarantee including communication charges to integrate at ICCC Palika Kendra for which API will provide by the firm. 3.5 mter pole lamp‐post

Supply, installation, testing and commissioning of 3.5 meter height cast iron lamp‐post made out of die cast iron The pole shall be provided integral service connection box & arrangement of one no SPMCB & 32 Amp heavy duty connector & cover the same . Galvanized Foundation bolt 12mmx450mm long with 2 Nos Nut ,Washer & Template for Foundation . The pole shall be primer and painted as approved colour finish complete etc as reqd . Make- Havells or equivalent. and along with Supply, installation, testing and commissioning of 40 watt LED IP‐65 fully weather proof, post‐top flang made of aluminum pressure die cast housing , single piece bo†om up to mounting of 60 MM OD pole / pipe, size of fiUng 580mmX340 mm(nominal) with opal acrylic protector duly silicon filled ,U.V. resistant P.U/ powder coated paint ,lacquer coated as approved colour finish with highly effacting electronic external driver, high voltage protection, power LED mounted on MCPCB with better heat dissipation arrangement . Duly wired up to connector complete etc as reqd. Make-Philip / Havells or equivalent.

Adjustable ground recessed Led fixture tree up light, design column feature & Column Uplighter Supply, installation, testing and commissioning of 9W LED light for tree up light & desgin column feature suitable. Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. Make Philips / Havells

Supply, installation, testing and commissioning of Led strip light IP 65 Make-Philip / Havells / wipro or equivalent.

Horticulture Work Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).

Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).

Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm

Fine dressing of the ground

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Flooding the ground with water including making kiaries and dismantling the same.

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 90 cm dia, and 90 cm deep

Supplying and Shrub plantation on prepaired pit, including cost of plant, plantation, watering and removal of rubbish and surplus earth, for all leads and lifts Providing and stacking Jasminum Sambac (Mogra) of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Supply and stacking of plant Tecoma gaudichaudi of height 60-75 cm. with 5-6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Clerodendron inerme plant having ht. 25 cm to 32 cm multi branched in 20 cm size of Plastic bag & as per direction of the officer-in-charge.

Providing and stacking Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots ofsize 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and stacking of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus long Island of height 15 cm to 20 cm, full of branches and foliage in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Tecoma stans of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Hibiscus variegated of height 45-60 cm. with 3-4 branches and healthy variegated foliage in earthen pots of size 20 cm as per direction of the officer-incharge.

Providing and displaying of Dracaena Kedarnath plant, having ht. 30 cm & above, well developed with good colorful foliage in 20 cm size of Earthen pot/Plastic pot . & as per direction of the officer-in-charge.

Providing and displaying of Dracaena mahatma plant, having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Dracaena Victoria plant, having ht. 30 cm & above, well developed with full of leaves, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and stacking of Largerstroemia indica of height 90-105 cm. multibranched in polybags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus benjamina (green) of height 120-135 cm. with 6-8 branches and lush green foliage in gunny bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge.

Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge..

Hymenocallis littoralis

Solidago 300mm height @450mm c/c

Sansivera300mm height @450mmc/c

Barleria 300mm height @450mmc/c

Lawsonia inermis @ 600mmc/c

Angelonia augustifolia

Pedilanthus

Agave desmentiana 300mm height @450mmc/c

Chamaedorea elegans 500mm height @750mm c/c

Supplying and planting of ground coverage's with soft cuttings ( including supply of required numbers of developed polled plants), on prepared ground, fine dressing and then planting with watering, etc complete as per direction of Officer in charge.Providing and Displaying of Ophiopogon plant, Green/Black full of leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge.

Providing and stacking of Dianella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Syngonium variegated, of height 20-30 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge.

Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Lantana

Cost of supplying and planting Creeper plants The height should not be less mentioned against the name ofplant. These should be supplied in polybag or earthen pot of min. 300mm dia. or as per size of trunk. the plant to be planted as per site engineers instruction, the approved species are Supply and stacking of Quisqualis indica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge

Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-incharge.

Supply and stacking of Clerodendrum splendens plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Cost of supplying and planting Grasses. The height should not be less mentioned against the name of creeper. These should be supplied in polybag or earthen pot of min. 300mm dia. or as per size of trunk. the plant to be planted as per site engineers instruction, the approved species are Pennisettum settacum 300mm height @600mm c/c

Imperata 300mm height @600mmc/c

Cenchrus ciliaris 300mm height @600mm c/c

Typha 300mm height @600mm c/c

Supplying and planting swale plantation on prepaired pit, including cost of plant, plantation, watering and removal of rubbish and surplus earth, for all leads and lifts Asparagus Meyeri, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot.

Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot.

Umbrella palm 500mm height @600mm c/c

Asplenium 500mm height @500mm c/c

Alocasia 500mm height @600mm c/c

Cost of supplying and planting Tree plants The height should not be less mentioned against the name of Tree. These should be supplied in polybag or earthen pot of min. 300mm dia. or as per size of trunk. the plant to be planted as per site engineers instruction, the approved species are Supply and stacking of Tabebuia sp. plant of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge

Supply and stacking of Lagerstroemia flosreginae plant of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v

Supply and stacking of Chukrassia tabularis plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Erythrina indica plant of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Millingtonia hortensis plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Tree Plants

Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge/edge bed watering manure and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge

Supplying, filling. Spreading & leveling Enginered Soil of mix ( Course sand 30% + Sand 20% + Clay 40% + silt 10% ) in the pit, in required thickness, for all leads & lifts all complete as per direction of Engineer - in charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

Providing and application of Neem oil cake (Neem ki khali) organic manure packed in 50kg HDPE bag at site of work and as per direction by the officer in carge (2 applications in a year)

Providing and Fixing in position Bamboo TREE Guard in Trangular shape with 3nos vertical wooden log 75 mm dia and Horizontal member of Half split Bamboo in 4 layers overall size 0.810 x 810 x 1.5m ht. base fixed on concrete with clamp and bolt, all complete as per direction of Architect. trees as per plan

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages,creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide , lawn mover and brush cutter with fuel will be provided by the Department & other T & P material/articles shall be provided by the contractor.)

Removal and transportation of cuttings, waste of plants, leaves Removel of malba,hort. Waste ,rubbish etc, including all leads and lifts

SHIVAJI CONSTRUCTION COMPANY

R.K. Jain and Sons Hospitality Services Pvt. Ltd.

Pawan Enterprises

K N ANAND CONSTRUCTIONS PRIVATE LIMITED