SPECIAL REPAIRS TO MD ACCN BLDGS ENTAIR BLOCK NO P-71, P-72 AND P-01 WITH COMPLETE ROOFING WITH GALVALUME SHEET, CEILING, TILLING, JOINERY WORKS AND CONNECTED ELECTRICAL SERVICES AT MEANEE LINE MEG AND CENTRE UNDER GE (NORTH) BANGALORE

Amount

Dismantling of Single Layer Mangalore pattern roofing tiling including ridges bedded in cement mortar etc complete all as specified and as directed

Dismantling of Battern for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm thick etc complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work etc complete all as specified and as directed

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions, laid, bedded & pointed in any mortar etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc and making good the disturbed surface of wall to match with adjoining surfaces all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 sqm but not exc 4sqm each, including cutting holes for removing the hold fast etc and making good the disturbed surface of wall to match with adjoining surfaces all as specified and directed.

Taking down steel tubing 15mm dia bore & connections complete all as specified and as directed

Taking down steel tubing 20mm dia bore & connections complete all as specified and as directed

Taking down steel tubing 25mm dia bore & connections complete all as specified and as directed

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain pipe up to 150 mm dia bore including fittings, jointed in cement mortar and taking out from trenches etc complete all as specified and directed

Dismantling water tanks exc 500ltr but not exc 1000 ltr with its its connections etc complete all as specified and as directed

M&L for Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc including box section etc complete all as specified and as directed

S&F Hollow /Solid steel section for structural use in beams, columns, rafter purlins or other connecting plates including necessary welding, riveting, nut bolts as per IS-4923 etc complete all as specified and as directed

S&F Pre-painted galvatume sheet, aluminum zinc coating, 150AZ, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum sheet, zinc coating, 150AZ, GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding ridges under valley to wall, fixed with self tapping screws etc complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D- 2 using 40mm graded stone aggregate as in 75 mm thick sub base of flooing etc complete all as specified and as directed

M&L for PCC 1:3:6, type C-1, using 20 mm graded aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement including joints filling with and directed.

M&L for Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregates as in 25 mm thick sub base of flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer 15mm thick cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for rendering 10 mm thick cement mortar (1:3) on fair faces of brick work or concrete surface as backing coat of dado / skirting etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for Granite stone slab 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including grinding the edges half round and polishing etc., complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L Pre-cast Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregates as in solid block masonary exc 10cm in width and setting in CM 1:6 all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregates as in landings, cover slabs for man holes etc. chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:6) etc complete all as specified and as directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces complete all as specified and directed.

M&L for RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate, Nominal mix as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

S&F Factory made pressed steel frame of size 125 X 60 mm for door with one ore more rebate, made of 1.25 mm thick M S sheet, includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F Factory made pressed steel frame of size 105 X 60 mm for door with one ore more rebate, made of 1.25 mm thick M S sheet, includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for Plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in hold fast block and filling of pressed steel chowkat including necessary formwork etc complete all as specified and as directed

M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed

S&F Flush door shutter 35mm thick solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F Second class hardwood 35 mm thick Glazed and skeleton shutters, Factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and as directed

S&F in repairs Block boards 18/19mm thick, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in cub board shutter, shelves etc complete all as specified and as directed

M&L for Decorative laminate 0.90 mm thick, type 1, surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, fixed to door/cub board shutter including teak wood beading 3mm thick and 18 mm wide including french polishing to match the existing colour etc complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplyng & fixing in opening as per specification complete all as sepecified and directed

S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

M & L for Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed / Sliding type, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

S&F sheet glass 4mm thick, ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares not exc 0.50 sqm in each pane complete all as specified and as directed

S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Butt hinges 100 mm size, stainless steel heavy weight and fixed complete all as specified and as directed

S&F Aluminium handle 150 mm size, cast type, anodised etc complete all as specified and as directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150 mm, fixed in floor etc complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finale caps cap etc complete all as specified and as directed

S&F in repairs stainless steel Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

S&F Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed

S&F in repairs European Water Closet, Ivory colour, including necessary soft closing seat cover, of size 540X375X415mm with S trap, connection to out going pipe and flushing pipe complete all as specified and as directed (Make : Prayag cat No 4018 or equlavent make specified in P S herein after)

S&F in repairs Vitreous china wash basin, Ivory colour, flat back size 550x400 including following accessories complete all as specified and as directed :- (i) Waste fitting 32 mm dia brass chromium plated (ii) PVC waste pipe 32mm dia 610 mm long (iii) PVC connection 15mm dia 450 mm long with PTMT nuts

S&F in repairs PVC dual type flushing cisrern, low level 10 Ltr capacity, white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc including PVC connection 15mm dia 450 mm long with PTMT nuts complete all as specified and as directed

S&F in repairs bib cock long body with flange fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15mm dia or brass ferrule complete all as specified and as directed

S&F in repair wall mixer with L Bend (with provision of hand shower) Brass chromium plated for mixing hot and cold water, screwed down for iron pipe 15mm dia bore and fixed complete all as specified and directed

S & F in repairs central hole basin mixer without pop up waste system (9" spout) brass chromium plated fixed to iron pipe 15 mm dia bore all as specified and as directed.

S&F in repairs Angle cock with flange fancy type, chromium plated cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed

S & F PVC connection 15 mm dia 450mm long with PTMT nuts all as specified and as directed.

S&F in repairs corner Glass Shelf (with brass brackets) fixed to wall etc complete all as specified and as directed (Make : Prayag cat No BEA-52 or equlavent make specified in P S herein after)

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make : Prayag cat No BA-25G or equlavent make specified in P S herein after)

S&F in repairs overhead stainless steel round rain shower 200mm dia and Flange fixed to pipe 15 mm dia bore etc complete all as specified and as directed

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed.

S&F in repairs Jet spray stainless steel suitable for EWC / Ango Indian EWC including fitting etc complete all as specified and as directed.

S&F in repairs Stainless steel plate rack of size 990.60mm x 914.40mm made of stainless steel 0.63mm thick including fixing to wall as directed etc complete all as specified and as directed.

S&F in repairs Stainless Steel Grab bar Towel rail 450 mm long 25mm dia including fixing on wall etc complete all as specified and as directed

S & F CPVC pipes 16mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ ceiling or laying in floors including cutting for concealing the pipes in stone / brick masonry complete all as specified & directed.

S & F CPVC pipes 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ ceiling or laying in floors including cutting for concealing the pipes in stone / brick masonry complete all as specified & directed.

S & F CPVC pipes 25mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ ceiling or laying in floors including cutting for concealing the pipes in stone / brick masonry complete all as specified & directed.

S&F Rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes, hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and as directed

S & F Ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25 mm dia bore complete all as specified and as directed [Minimum weight for 25mm-455gms] .

S & F in repairs Gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe 25 mm dia bore all as specified and as directed.

S&F PVC SWR pipes 110mm dia bore, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed

S&F PVC SWR pipes 75 mm dia bore, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed

S&F PVC SWR pipes 110mm dia bore, single socketed in any length with rubber rings joint fixed on wall complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia complete all as specified and directed

S&F PVC bends (any radius) of 75mm dia complete all as specified and directed

S&F PVC vent cowls of 110mm dia complete all as specified and directed

S&F in repairs PVC (SWR) multi floor trap 75 mm dia bore outlet with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick cement mortar (1:4) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

Supply only Liquid water proofing compound, ISI marked, complete all as specified and as directed.

M&L for preparation of wall surface and applying 1mm thick wall care putty and finished to smooth surface etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats of acrylic emulsion distemper over a coat of self primer etc complete all as specified and as directed

M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer etc complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L for preparation of old painted/treated steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

S&F False ceiling with grid suspended system of grid size 600X600mm, standard section consisting of main runner 29X24.70X0.80mm, cross Tee 29X24.70X0.80mm and wall angle 22.2 X22.2X0.65mm, ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastner, butterfly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with PPPCGS) including 4 mm thick HPSC self textured design pre primered non asbestons fibre cement building boards fixed to false ceiling etc complete all as specified and as directed

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

M & L for concealed Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded FRLS copper conductor cable 1100 volts grade conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories concelaed type wiring including GI branded sunken boxes suitable for modular concealed in walls including plastic/heylam laminated sheet top cover 3 mm thick modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, fan regulators etc., including 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :-

One light / fan/ Exhaust Fan point controlled by one switch

One light controlled by two way switch

One 3 pin socket out let 5 Amps on independent board

One 3 pin socket out let 5 Amps on same board with other switches

One Bell / Buzzer Point controlled by bell push

M & L for concealed Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLS cable 1100 volts grade conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade, ISI marked with accessories concelaed type wiring including GI branded sunken boxes suitable for modular concealed in walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, etc., including 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed

Note for Item No 102 & 103 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be included in point wiring.

S&F in repairs LED batten & luminaire suitable for indoor applications 20 Watts capacity, 4 feet long with extruded aluminium housing & integrated LED channel complete with all accessories all as specified and directed.

S&F in repairs LED batten suitable for indoor applications 10 Watts capacity, 2 feet long with extruded aluminium housing & integrated LED channel complete with all accessories all as specified and directed.

S&F Switch piano flush type single pole one way 5 Amps 230 volts all as specified and as directed

S&F Switch socket combination 2 in 1, 3 pin 6 and 16 Amps 230 volts, flush type, universal all as specified and as directed

S&F Switch piano flush type single pole, two way 5 Amps 230volts all as specified and as directed

S&F Switch socket combination 5 pin 2 in 1, 5 Amps flush type 230volts all as specified and as directed

S&F Stepped type electronic fan regulator, flush switch type all as specified and as directed

S&F Decorative, wall mounting ,champagne gold finish fixture with plastic body suitable for 9 watt LED lamp B22 base all as specified and directed by Engineer -in-Charge

S&F Bell push, flush type 5Amps 230volts all as specified and as directed .

S&F in repair Ding Dong bell, 230 volts AC single pole all as specified and as directed .

S&F in repair MCB SPN 240 volts 40 Amps C curves complete all as specified and as directed

S&F in repair MCB single pole 240 volts 10/16/20/32 Amps, C curves complete all as specified and as directed

S&F in repairs MCB Distribution board, SPN 12 way, double door type, 240 volts with 200 Amps rated busbar all as specified and as directed.

S&F in replacement of MCB Distribution board, TPN 4 way, double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB TPN 63 Amps 415 volts 10 KA 'C' curves complete all as specified and as directed

S&F in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

M L for Sub main wiring with two runs of single core 2.5Sqmm 1100 volts grade multistranded FRLS copper conductors, along with 2.5 Sqmm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run through & including suitable size of PVC conduit concealed type including taking out old submain wiring etc complete all as specified and as directed. (Note : Three run of 2.5sqmm cable and one run of Conduit altogether measured as one unit)

M L for Sub main wiring with two runs of single core 6 sqmm 1100 volts grade multistranded FRLS copper conductors, along with 6sqmmm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run through & including suitable size of PVC conduit concealed type including taking out old submain wiring etc complete all as specified and as directed. (Note : Three run of 6sqmm cable and one run of Conduit altogether measured as one unit)

Note for Item No 120 & 121 :- Cost of cutting chases for concealed conduits and making good to walls included in the quoted rate

M&L for Earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre- cast RCC (1:2:4) type B1 slab 40mm thick with 8 mm TMT bars reinforced at 10 cm centre to centre both ways, funnel with watering pipe, protection pipe, wire mesh and lugs, test point complete all as specified and as directed.

Supply and fixing LED bldg security light fitting 35 Watts capacity, pressure die cast housing along with prismatic polycarbonate diffuser with IP 66 protection complete all as specified and as directed.

S&F Storage type water heater (Geyser) 25 Ltrs capacity, electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. etc complete all as specified and directed.

S&F Ceiling fans complete with accessories, 230Volts, SP, 1200 mm Sweep with BEE 3 Star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed.

S&F in repairs Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc including applying two coats of aluminum paint over a coat of red oxide primer c omplete all as specified and directed.

Supply and fixing in repairs Exhaust fan, steel body AC single Phase. 230Volts of size 300m sweep with blades, frame and louvers complete including necessary arrangement for installation all as specified and directed.

S&F in repairs LED lamp of capacity 09 watt suitable to fit in angle holder all as specified and directed.

M&L for core cutting in wall for installation of exhaust fan and making good of distrubed surfaces of wall to match with adjoining surfaces all as specified and directed.

Taking down the ceiling fan 1200mm/1400mm sweep by disconnecting electric connections, dismantling the blades etc all as specified and directed.

M&L for preparation of surface of ceiling fan 1200mm/1400mm sweep including filling cavities with filler etc complete and spray painting using spray gun with synthetic enamel paint, drying all as specified and directed.

S&F in replacement PVC Fresh air fan of 200 mm sweep, 1200/1400 RPM, with frame & louver all as specified and directed.

S&F in repairs Sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with one single pole MCB 32 Amps, C curves 230 Volts AC complete all as specifeid and directed.

Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.

Returning, filling in trenches including spreading leveling watering and well ramming in layers with soil not exc 25 cm thick in each layer complete as specified and as directed

Removing of excavated soil to a distance not exc 50m and depositing 1.5 mtr above the starting point complete all as specified and as directed

M & L for sand cushioning with a layer of sand 23 cm thick under and above the cable all as per Para 19.75 of SSR part-I complete all as specified and as directed. (Note : Punned thickness will be measured for payment)

Supply & Laying sub class 'B' burnt bricks for cable protection all as per Para 19.75 of SSR part-I complete as specified as directed

Supply & Laying XLPE insulated screened PVC bedded galvanised steel strip or wire armoured,electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable lugs including taking out the existing unserviceable cable for following size :-

3.5 Core x 35 Sqmm

3.5 Core x 25 Sqmm

S&F in repairs G I tubing medium grade, 50 mm dia bore with all fitting laid in trenches/walls/Roads complete as specified & as directed

S&F in repairs G I tubing medium grade, 25 mm dia bore with all fitting laid in trenches/walls/Roads complete as specified & as directed

S&F in repairs G I tubing medium grade, 20 mm dia bore with all fitting laid in trenches/walls/Roads complete as specified & as directed

S&F in repairs Gun metal Gate valve of size 25 mm dia with iron wheel as specified & as directed

S&F in repairs Gun metal Gate valve of size 50 mm dia with iron wheel as specified & as directed

S&F in repairs Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type as specified & as directed

M&L for Construction of Valve pit chamber of size internal size 600 mm x 600 mm x 600 mm with following specification complete including dismantaling of old unserviceable valve pit chamber all as specified and directed :- (i) Excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exc 50m and depositing were directed. (ii) PCC (1:4:8) type D-2 foundation (iii) Brick masonry 230mm thick in CM(1:4), plastering 12mm thick in cement mortar (1:4) internally finished even and smooth and flush pointing externally in CM(1:4). (iv) Angle iron frame 40X40x6mm, MS sheet cover 3 mm thick with handle and locking arrangements and painting all steel surfaces with two coat of synethic enamelled paint over a coat of red oxide primer.

M/S POTHIRAJ AND CO (BID ID -3501211)

bholanath bera (BID ID -3501225)

K. VENKATESH NAIDU (BID ID -3501663)

OM INFRA (BID ID -3496725)

PRAGATHI BUILDERS (BID ID -3501409)

ABHISHEK CONSTRUCTIONS (BID ID -3501201)

GNANI BUILDERS (BID ID -3501938)