TTPS- ECHP-II-Dismantling of 300 mtrs. SH Belt at Conveyor-67 with specification of 1800mm BW 5 ply, 5 3, 1800 KN N, Nylon/Nylon and transported to Conveyor-69 and erected in the Conveyor-69 for replacing the damaged belt.

Cutting and removal of conveyor belt to a length 300 mtr, Rolling the released belt, loading on the lorry after completion of the work including hire charges for T&Ps etc., complete.

Charges for Drawal and loading of SH Conveyor belt about 300 meters in belt drum from con 67 coal jetty -II to conveyor 69 tail end area transporting and unloading at conveyor - take up area including T&P hire charges and cost of consumables.

Charges for unloading counter weight from counter weight 30-40 ton capacity box arranging chain block and belt clamps, lifting counter weight box to the required level and after completion of belt joint work, releasing the counter weight box loading the counter weight in all conveyors. (For higher counter weight capacity and take-up tower height) including T&P hire charges and cost of consumables.

Charges for assembling of 1st belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand including T&P hire charges and cost of consumables.

Charges for assembling of 2nd belt drum stand with necessary supports and stiffness providing at conveyor take up area and unloading the first drum in the stand including T&P hire charges and cost of consumables.

Charges for transporting the belt clamps, chain blocks and special tools and spanners to work spot and return back after completion of work including T&P hire charges and cost of consumables.

Charges for dismantling the fluid coupling end disc coupling springs by releasing all bolts & nuts in primary and secondary drives including T&P hire charges and cost of consumables.

Charges for uncoiling the 2 belt drum 300 mtrs. belt and laying the belt about 300 meters by using chain block & pull lift arrangements and pulling the belt through wire rope in step by step manner inspecting very wire rope sliding points and conveyor belts for 1800 mm width belt and including T&P hire charges and cost of consumables.

Charges for removing the carrying and return idlers with frames and re-fixing the same after completion of work and including T&P hire charges and cost of consumables.

Charges for making preliminary arrangements for providing 1st belt joint and assisting the belt joint works and other allied works and including T&P hire charges and cost of consumables.

Charges for making preliminary arrangements for 2nd & 3rd & 4th belt joint and assisting the belt joint work and other allied works and including T&P hire charges and cost of consumables.

Charges for arresting the belt after laying by using belt arresting clamps at 4 locations and allied Works including T&P hire charges and cost of consumables.

Charges for assembling the fluid coupling disc and cover with coupling springs and tightening all bolts and lubricating the springs and including T&P hire charges and cost of consumables.

Charges for trail running the conveyor on no load and load condition to check the movement of counter weight, belt sway and carrying the belt tracking work including T&P hire charges and cost of consumables.

Charges for providing cold vulcanizing joint in 1800mm width conveyor belt including cost of vulcanizing materials hire charges for T&P'S cost of consumables etc complete.

S.GOPALA KRISHNAN CONTRACTOR (BID ID -1214120)