GE/PNH-82/2020-21

Amount

Excavating in trenches not exc 1.5m wide and exc 1.5 m but not exc 3.0 m in depthor foundation etc for shafts, wells, cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified and dircted.

Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point, complete all as specified and directed.

Returning, Filling in soil including spreading, leveling, watering and well ramming in players not exc 25cm, complete all as specified and dircted.

M&L for Plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and dircted.

M&L for Plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed by the Engineer in Charge.

Extra for forming fair finished drain or channel 30 cm inner grith in cemnt concrete using extra cement including forms, moulds mitred/stopped ends etc., complete all as specified and directed.

M&L for Walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.

All as per ser Item No 7.00 above but except stone, complete all specified and directed

M&L for Rendering 20mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and dircted.

M&L for PCC 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in coping, benching, plinth band, bed block, PCC blocks for hold fast including rounded or chamfered angle as directed including necessary form work etc., complete all as specified and directed.

M&L for RCC pipes class NP-2 450mm dia laid in trenches and jointed with adhesive in any length with rubber ring joints, laid in trenches or in floor in repair complete all as specified and dircted.

M&L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes for 450mm bore RCC pipe after they are laid in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and dircted.

M&L for Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L for Applying three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified and dircted.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 50mm thick Plain Cement Concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor & finished the surface even & smooth without using extra cement including necessary joint filling with mixture of paving bitumen and sand in 1:3, complete all as specified and dircted.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm crushed stone stone aggregate) as in base course of floor finished rough to receive tile flooring, complete all as specified and dircted.

M&L for 600mm x 600mm x 20-25mm thick Machine cut Kota stone slab flooring, bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:4), including cutting, grinding and mirror polishing complete all as specified and dircted.

M&L for Machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete fixed over & including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc.complete all as specified and dircted.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and dircted.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and pigment to match the shade of tiles laid over and including 15mm screed bed or beading layer in CM 1:4 complete all as specified and dircted.

All as per Item No. 23.00 above but in vertical surfaces such as skirtings dados and risers to steps etc including 10mm screed bed or beading layer in CM 1:4 complete all as specified.

M&L for Glazed ceramic coloured tiles (300 x 200 mm ) x 7mm thick as in vertical surface such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including including 10 mm thick rendering in CM 1:3 to receive tiles, complete all as specfied and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and dircted.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area exceeding 1.5Sqm but not exceeding 4 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and dircted.

S&F Pressed steel frame of size 125X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with double rebated including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified and dircted.

S&F 35 mm 2nd class hard wood plain framed factory made, paneled shutter (any number of panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces .The size of rail and stile as per IS :1003(Part-I ) kiln seasoned and chemically pressure treated, complete all as specified and dircted.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securing glass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (a). complete all as specified and dircted.

S&F Steel windows with side hung shutters including box type hinges with steel handle-02 Nos, steel tower bolts 100 mm long and steel peg stay, complete with glazing bars, dovetailed or welded including locking arrangement, complete all as specified and dircted.

S&F Galvanised mild steel wire cloth 0.63 nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and dircted.

S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and dircted.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and dircted.

S&F Aluminium anodized barrel tower bolt of extruded section complete of size 150 mm long complete all as specified and dircted.

S&F Aluminium alloy handles, cast type, anodised of size 150 mm complete all as specified and directed.

M&L for Two coat of synthetic enamel paint over a coat of pink primer on new untreated wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete all as specified and dircted.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and removing unserviceable material exc 100 mtr, complete all as specified and dircted.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and dircted.

M&L for 18 to 20mm thick black Granite stone (table rubbed and polished) in cooking plateform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over & including 15mm thick screed bed in CM 1:4 after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and dircted.

M&L for RCC (nominal mix) 1:1.5:3, type, A-1 (using 20mm graded crushed stone aggregate), as in beams , cantilevers, bressummers, lintel over 1.5 mtr span, complete all as specified and dircted.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F Rolled mild steel works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication as directed etc confirming to Fe 410W(Gde E-250), quality 'A', complete all as specified and dircted.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and dircted.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and dircted.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and dircted.

S&F Mild steel work as in wind ties for roof including securing bolts, including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-250 Gde E-165 complete all as specified and dircted.

M&L for Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces of any description, over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

M&L for Applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10cm width or girth, complete all as specified and directed.

Dismantling water tanks of any decription/pattern of RCC/PCC/PVC exceeding 500 ltr capacity but not exc 1000 ltrs, complete all as specified and dircted.

S&F in repair 15 mm dia bib tap with flange, cast brass chromium plated fancy type screwed for iron pipes with crutch or butterfly handle, complete all as specified and directed. Make:- Jaguar Cat part No. CON-047KN or Equivalent cat part of make as specified in Appx 'A' here in after.

S&F in repair 15 mm dia stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle, screwed at both ends, complete all as specified and directed. Make: Jaguar cat part No. CON-083KN or equivalent cat part No of Make as specified in Appx 'A' here in after.

S&F PVC connection 15mm size with PTMT nuts on both ends of length 450mm, complete all as specified and dircted.

S&F PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint laid in trenches/floor/walls as soil pipe(vent pipe)/weep holes, complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint laid in trenches/floor/walls as soil pipe(vent pipe)/weep holes, complete all as specified and directed.

S&F PVC (SWR) bends type B any radius bore 110mm, complete all as specified and dircted.

S&F PVC (SWR) bends type B any radius bore 75mm, complete all as specified and dircted.

S&F Stainless steel sink with drainage board 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and dircted.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I with 20mm ball brass valve, high pressure with polythene float and flynut complete all as specified and directed

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

S&F Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and dircted.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick wall surface or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and dircted.

M&L for Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade including wall care putty of 1-3mm thick over plastered surface of wall, complete all as specified and dircted.

M&L for Preparation of old plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade including wall care putty of 1-3mm thick over plastered surface of wall, complete all as specified and dircted.

M&L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

M&L for Preparation of old plastered surfaces of wall and applying one coats of cement base paint, complete all as specified and directed.

M&L for Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified and dircted.

M&L for Applying two coats of white wash including preparation of old treated plastered surfaces of wall complete all as specified and dircted.

Writing letters or figures (Block, Roman, Italic or Indian) n. exc 30cm high with synthetic enamel paint including oblitering old writing of any description to match existing work, complete all as specified and dircted.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and dircted.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connected plate confirming to Fe 410W(Gde E-250), quality 'A' including painted with and including one coat of primer, complete all as specified and dircted.

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 0.5mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) & E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed. Make:- Everest Industries Ltd of equivalent as approved by GE.

M&L for 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Plain cement Concrete 1:3:6 type- C1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified and directed.

S&F 300mm ordinary rat tail Mild steel rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F Mild steel butt hinges, medium weight, cold rolled,50mm long fixed, complete all as specified and directed.

S&F Second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exceeding 200 cu.cm each complete all as specified and directed.

S&F Aluminium anodized barrel tower bolt of extruded section complete of size 100 mm long complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beading, complete all as specified and directed.

S&F PVC drapery curtain rod including fixing brackets stops rollers etx complete all as specified and directed.

M&L for complete removal of existing old treated plastered surfaces of wall and applying two coat of oil emulsion distemper white or tinted shade complete all as specified and directed.

Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M&L for Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated and unsheathed heavy duty cable drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/Exhaust fan point controlled by one switch/ 2way bell push or one fan point controlled by one switch through regulator, complete all as specified and directed.

All as per item No 88 above but for one fan/exhaust fan point controlled by one way switch on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

All as per item No 88 above but for 3 Pin socket outlet 5 Amps point on same board complete all as specified and directed.

All as per item No 88 above but for 3 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

All as per Item No 88 above but for 3 Pin socket outlet 15 Amps point on independent board other switches with with PVC insulated copper conductor cable 2.5sqmm 1100 Volts grade, complete all as specified and directed.

S&F in repair Switch socket multipurpose combination 2 in 1, 2 and 3 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F in repair Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F in repair Switch piano flush type 16 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F in replacement LED Tube light fitting suitable for LED 20W tube rod made out of with polycarbonate housing & integrated electronic driver complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 20W LED tube rod fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:-LHLDEFXD5L8R020 for LED tube rod & Cat Part No:-LUMILINEPLUSBS20WLED865SPCSS or Equaivalent cat part of make as specified in P.S. Note :- The LED batten and LED tube rod shall be of same make.

S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with & including LED lamp 10 watts (B-22 holder), complete all as specified. Make of LED lamp:- Havells cat part No LHlDERUEML8x010 or Equaivalent cat part of make as specified in P.S.

S&F in replacement LED street light fittings 30 Watt made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired and making connection with copper flexible cable of suitable size to light fitting fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:ENDURAPEARLSL30WLED757SASYTOPCMP or Equivalent cat part of make as specified in Appx 'A' here in after.

S&F in repair Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 4 way with 100Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning fixed in repairs, complete all as specified. Make:- Havells cat part No-DHDPSHODPW04 or Equaivalent cat part of make as specified in P.S.

S&F in repair MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series, complete all as specified. Make: Havells Cat Part No.DHMGCSNF006-032 or equivalent in Legrand/ C&S Electric/ ABB/ Siemens/ Scheneider

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed. Make: Havells Cat Part No. DHMGCSPF006-032 or equivalent in Legrand/ C&S Electric/ ABB/ Siemens/ Scheneider

S&F 1100 volts grade heavy duty cable PVC insulated multi stranded aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 16Sqmm including taking down existing old unsv service connection, complete all as specified and directed.

S&F in repair House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay including taking down existing old unsv house bracket, complete all as specified and directed.

S&F in repair Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

S&F Heavy duty exhaust Fan 350mm sweep 1400 RPM, single phase including all connecting accessories, complate and depositing old unsv fan to MES store, complete all as specified and directed.

Taking down carefully unsv sub main wiring including earth continuity of any type / size with surface casing caping / TW batten / pvc conduit surface or recess and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

S&F in repair Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified and directed.

S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified. Make:- Havells cat part No-DHDPSHODPW08 or Equivalent cat part of make specified in PS.

S&F MCB single pole and neutral 40 to 63 amps 240 volts 10 KA 'C' series complete all as specified and directed. Make: Havells Cat Part No. DHMGCSNF040 - DHMGCSNF063 or equivalent in Legrand/ C&S Electric/ ABB/ Siemens/ Scheneider/

S&F Sub main wiring with single core cable 2 x 4 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 2.5 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed. Note:-(i) Rate for PVC casing & capping or conduit are deemed to be included in unit quoted rates. (ii) Two run of 4 sqmm and one run of 2.5 sqmm copper cable shall be measured as one unit length.

S&F 1100 volts grade heavy duty cable PVC insulated multi stranded aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10 Sqmm including taking down existing old unsv service connection, complete all as specified and directed.

S&F Steel windows/ventilator glazed and gauged (combination ) with side hung/SQM top hung shutter incl box type/projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25 mm thik pressed steel frame complete incl necessary cooler arrangement in window & guard bars all as per sample kept at complete all as specified and dircted.

M/S KIRAN CONSTRUCTIONS

M/S Jyoti Parkash Tilak Raj Gupta

M/S KEWAL KRISHAN SANJEEV KUMAR VAID